ASNT Level III Basic Exam Questions and Answers
Guaranteed Success
SNT-TC-1A is not intended to be used as a strict specification. - ANSWER-
Which of the following statements is true concerning the usage of SNT-TC-
1A?
Written and stated in general terms - ANSWER-The SNT-TC-1A Interpretation
Panel will respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the
certification of the company's NDT personnel - ANSWER-With regard to the
training of NDT personnel, the employer:
To establish their own written practice that must be used as a strict
specification. - ANSWER-SNT-TC-1A is intended as a guideline for
employers:
The employer should review the detailed recommendations and modify
them as necessary to meet its particular needs. - ANSWER-The following is a
statement in SNT- TC-1A "It is recognized that these guidelines may not be
appropriate for certain employers; circumstances and / or applications."
What should be done if the guidelines are not appropriate?
The individual's employer. - ANSWER-Who should be responsible to assess
whether or not an individual should be qualified and certified who does not
perform NDT, but monitors and evaluates NDT?
Holographic testing - ANSWER-To which of the following NDT methods is
SNT-TC-1A currently not applicable
With flexibility and reason - ANSWER-ASNT intended that the
recommendations of SNT-TC-1A be applied
The employer. - ANSWER-Of the following, which is most appropriate to
determine the needs to qualify and certify personnel whose only NDT
function is to operate digital thickness equipment.
Written testimony of qualification. - ANSWER-Certification is
It has been specified by the customer. - ANSWER-Use of SNT-TC-1A is
mandatory when:
Level I, II, III. - ANSWER-The basic levels of qualification recommended by
SNT-TC-1A are:
This study source was downloaded by 100000848900824 from CourseHero.com on 08-02-2023 13:04:51 GMT -05:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
, Weather any NDT personnel should be qualified and certified depends
solely upon the needs of the employer and the requirements of the
employer's customers or clientele. - ANSWER-Should personnel that operate
ultrasonic digital thickness measurement equipment to qualified and
certified
The Trainee may not conduct nondestructive test independently and may
not report test results - ANSWER-According to the recommendations of SNT-
TC-1A which of the following is true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her
organization. - ANSWER-According to SNT-TC-1A, which of the following is
not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations, and
write reports of test results. - ANSWER-According to written instructions, an
NDT Level I may be qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above
functions provided that they are in accordance with written instruction of a
Level III or designee. - ANSWER-May a Level I independently perform,
evaluate and sign for results of nondestructive test with supervision and
guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II. - ANSWER-
Which of the following statements is true concerning the definitions of
Trainee, Level I, II and III in SNT-TC-1A?
Establish techniques - ANSWER-Which of the following is not within the scope
of activities of a Level II individual, as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I personnel. - ANSWER-
A recommended in SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes
standards and specifications. - ANSWER-According SNT-TC-1A which of the
following is true for a Level III?
The employer. - ANSWER-In Accordance with SNT-TC-1A, who is
responsible for establishing a written practice for the control and
administration of NDT personnel training, examination and
certification?
Should be described in the employer's written practice only if they are
different form SNT-TC-1A recommendations. - ANSWER-The
responsibility of each level of certification for determining the
acceptability of materials or components:
This study source was downloaded by 100000848900824 from CourseHero.com on 08-02-2023 13:04:51 GMT -05:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
Guaranteed Success
SNT-TC-1A is not intended to be used as a strict specification. - ANSWER-
Which of the following statements is true concerning the usage of SNT-TC-
1A?
Written and stated in general terms - ANSWER-The SNT-TC-1A Interpretation
Panel will respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the
certification of the company's NDT personnel - ANSWER-With regard to the
training of NDT personnel, the employer:
To establish their own written practice that must be used as a strict
specification. - ANSWER-SNT-TC-1A is intended as a guideline for
employers:
The employer should review the detailed recommendations and modify
them as necessary to meet its particular needs. - ANSWER-The following is a
statement in SNT- TC-1A "It is recognized that these guidelines may not be
appropriate for certain employers; circumstances and / or applications."
What should be done if the guidelines are not appropriate?
The individual's employer. - ANSWER-Who should be responsible to assess
whether or not an individual should be qualified and certified who does not
perform NDT, but monitors and evaluates NDT?
Holographic testing - ANSWER-To which of the following NDT methods is
SNT-TC-1A currently not applicable
With flexibility and reason - ANSWER-ASNT intended that the
recommendations of SNT-TC-1A be applied
The employer. - ANSWER-Of the following, which is most appropriate to
determine the needs to qualify and certify personnel whose only NDT
function is to operate digital thickness equipment.
Written testimony of qualification. - ANSWER-Certification is
It has been specified by the customer. - ANSWER-Use of SNT-TC-1A is
mandatory when:
Level I, II, III. - ANSWER-The basic levels of qualification recommended by
SNT-TC-1A are:
This study source was downloaded by 100000848900824 from CourseHero.com on 08-02-2023 13:04:51 GMT -05:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
, Weather any NDT personnel should be qualified and certified depends
solely upon the needs of the employer and the requirements of the
employer's customers or clientele. - ANSWER-Should personnel that operate
ultrasonic digital thickness measurement equipment to qualified and
certified
The Trainee may not conduct nondestructive test independently and may
not report test results - ANSWER-According to the recommendations of SNT-
TC-1A which of the following is true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her
organization. - ANSWER-According to SNT-TC-1A, which of the following is
not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations, and
write reports of test results. - ANSWER-According to written instructions, an
NDT Level I may be qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above
functions provided that they are in accordance with written instruction of a
Level III or designee. - ANSWER-May a Level I independently perform,
evaluate and sign for results of nondestructive test with supervision and
guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II. - ANSWER-
Which of the following statements is true concerning the definitions of
Trainee, Level I, II and III in SNT-TC-1A?
Establish techniques - ANSWER-Which of the following is not within the scope
of activities of a Level II individual, as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I personnel. - ANSWER-
A recommended in SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes
standards and specifications. - ANSWER-According SNT-TC-1A which of the
following is true for a Level III?
The employer. - ANSWER-In Accordance with SNT-TC-1A, who is
responsible for establishing a written practice for the control and
administration of NDT personnel training, examination and
certification?
Should be described in the employer's written practice only if they are
different form SNT-TC-1A recommendations. - ANSWER-The
responsibility of each level of certification for determining the
acceptability of materials or components:
This study source was downloaded by 100000848900824 from CourseHero.com on 08-02-2023 13:04:51 GMT -05:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
