AMMO 51 MV Questions and correct
Answers
1. A semi-tractor trailer is pulling a trailer transporting Hazard Class/Division 1.3. The
tractor will carry no explosives. Which statement is the most correct?
A) The explosives 1.3 placard must be placed on the front of the tractor only
B) The explosives 1.3 placard must be placed on the front of the trailer only
C) The explosives 1.3 placard may be placed on either the front of the tractor or the
front of the trailer
D) No placard is required on the front
Answer: C
2. Each emergency reflective triangle shall be a collapsible equilateral triangle with
legs not less than how many inches in length?
A) 15 inches
B) 17 inches
C) 19 inches
D) 21 inches
Answer: B
3. How many and what type of fire extinguishers are commercial vehicles
transporting Hazard Class/Division (HC/D) 1.1 or 1.3 material required to carry?
A) 5-B/C
B) 10-B/C
C) 15-B/C
D) 20-B/C
Answer: B
4. How often is a civilian driver under the age of 60 required to have a physical
examination?
,A) 1 year
B) 2 years
C) 3 years
D) 5 years
Answer: B
5. If an accident causes a class 1 item to detonate, which HC/D typically causes all
surrounding items to detonate at the same time?
A) HC/D 1.2
B) HC/D 1.3
C) HC/D 1.4
D) HC/D 1.1
Answer: D
6. Must a copy of a Competent Authority Approval (CAA) accompany a shipment of
PE79 that will be shipped to a location in Japan?
A) Yes
B) No
C) Only if the shipment exceeds 500 lbs
D) Only if traveling by air
Answer: A
7. Ordnance carried on military-owned tactical vehicles operating on public roads
must be blocked and braced in accordance with which standard?
A) MIL-STD-1319C
B) MIL-STD-1320D
C) MIL-STD-1321E
D) MIL-STD-1322F
Answer: B
, 8. What is a size of steel strapping that may be used to secure ammunition to flatbed
trailers?
A) 1 in x 0.025 in
B) 1.5 in x 0.040 in
C) 2 in x 0.050 in
D) 2.5 in x 0.060 in
Answer: C
9. What is assigned to every type of ammunition so that it can be properly accounted
for and protected from falling into the wrong hands?
A) NSN
B) DODIC
C) CIIC
D) NALC
Answer: C
10. What is the proper shipping name for UN identification number and hazard
class/division for NALC D544 material?
A) Projectile UN 0168, 1.1d
B) Projectile UN 0169, 1.2d
C) Projectile UN 0167, 1.3d
D) Projectile UN 0166, 1.4d
Answer: A
11. What part of the DD Form 626 documents the required driver information?
A) Section 1
B) Section 2
C) Section 3
D) Section 4
Answers
1. A semi-tractor trailer is pulling a trailer transporting Hazard Class/Division 1.3. The
tractor will carry no explosives. Which statement is the most correct?
A) The explosives 1.3 placard must be placed on the front of the tractor only
B) The explosives 1.3 placard must be placed on the front of the trailer only
C) The explosives 1.3 placard may be placed on either the front of the tractor or the
front of the trailer
D) No placard is required on the front
Answer: C
2. Each emergency reflective triangle shall be a collapsible equilateral triangle with
legs not less than how many inches in length?
A) 15 inches
B) 17 inches
C) 19 inches
D) 21 inches
Answer: B
3. How many and what type of fire extinguishers are commercial vehicles
transporting Hazard Class/Division (HC/D) 1.1 or 1.3 material required to carry?
A) 5-B/C
B) 10-B/C
C) 15-B/C
D) 20-B/C
Answer: B
4. How often is a civilian driver under the age of 60 required to have a physical
examination?
,A) 1 year
B) 2 years
C) 3 years
D) 5 years
Answer: B
5. If an accident causes a class 1 item to detonate, which HC/D typically causes all
surrounding items to detonate at the same time?
A) HC/D 1.2
B) HC/D 1.3
C) HC/D 1.4
D) HC/D 1.1
Answer: D
6. Must a copy of a Competent Authority Approval (CAA) accompany a shipment of
PE79 that will be shipped to a location in Japan?
A) Yes
B) No
C) Only if the shipment exceeds 500 lbs
D) Only if traveling by air
Answer: A
7. Ordnance carried on military-owned tactical vehicles operating on public roads
must be blocked and braced in accordance with which standard?
A) MIL-STD-1319C
B) MIL-STD-1320D
C) MIL-STD-1321E
D) MIL-STD-1322F
Answer: B
, 8. What is a size of steel strapping that may be used to secure ammunition to flatbed
trailers?
A) 1 in x 0.025 in
B) 1.5 in x 0.040 in
C) 2 in x 0.050 in
D) 2.5 in x 0.060 in
Answer: C
9. What is assigned to every type of ammunition so that it can be properly accounted
for and protected from falling into the wrong hands?
A) NSN
B) DODIC
C) CIIC
D) NALC
Answer: C
10. What is the proper shipping name for UN identification number and hazard
class/division for NALC D544 material?
A) Projectile UN 0168, 1.1d
B) Projectile UN 0169, 1.2d
C) Projectile UN 0167, 1.3d
D) Projectile UN 0166, 1.4d
Answer: A
11. What part of the DD Form 626 documents the required driver information?
A) Section 1
B) Section 2
C) Section 3
D) Section 4
