Ohio Asbestos Abatement Worker Exam
Practice Questions And Correct Answers
(Verified Answers) Plus Rationales
2025|2026 Q&A | Instant Download Pdf
1. Which federal agency regulates asbestos in the workplace?
A) FDA
B) EPA
C) OSHA
D) CDC
Rationale: OSHA sets standards for asbestos exposure and worker
protection in occupational settings.
2. What is the primary health risk associated with asbestos exposure?
A) Skin rash
B) Lung cancer and mesothelioma
C) Hearing loss
D) Vision problems
, Rationale: Inhalation of asbestos fibers can cause lung cancer,
mesothelioma, and asbestosis.
3. What type of respirator is typically required for asbestos abatement?
A) Surgical mask
B) NIOSH-approved P100 respirator
C) Cloth mask
D) Dust mask
Rationale: P100 respirators filter out 99.97% of airborne asbestos
fibers.
4. Which method is safest for removing friable asbestos?
A) Dry scraping
B) Wet removal
C) Sanding
D) Chipping
Rationale: Wet methods reduce airborne fiber release during
removal of friable asbestos.
5. What does friable asbestos mean?
A) Bound in cement
B) Easily crumbled or powdered by hand
C) Non-hazardous
D) Asbestos insulation only
Rationale: Friable asbestos can release fibers into the air easily,
posing higher health risks.
,6. How often should asbestos workers undergo medical surveillance?
A) Once a decade
B) Every 5 years
C) Only if symptoms appear
D) Annually
Rationale: OSHA requires annual medical examinations for workers
exposed to asbestos.
7. Which of the following is a Class I asbestos work activity?
A) Removing asbestos-containing floor tiles
B) Removing thermal system insulation
C) Encapsulating asbestos cement
D) Conducting air monitoring
Rationale: Class I work involves high-risk asbestos like TSI (pipes,
boilers).
8. Which is the first step in an asbestos abatement project?
A) Cleaning up debris
B) Conducting a survey and inspection
C) Applying sealant
D) Removing asbestos
Rationale: A proper survey identifies asbestos type, location, and
hazard level before work begins.
9. What is the purpose of negative air pressure units (NAPUs) in asbestos
abatement?
, A) Prevent asbestos fibers from escaping the work area
B) Heat the work area
C) Remove water
D) Increase ventilation for workers
Rationale: NAPUs maintain negative pressure to keep contaminated
air from leaving the containment area.
10. How should asbestos waste be transported?
A) In open containers
B) In leak-tight, labeled containers
C) Mixed with regular trash
D) In cardboard boxes
Rationale: OSHA and EPA require asbestos waste to be sealed,
labeled, and handled carefully to prevent fiber release.
11. Which of the following PPE is required during asbestos
abatement?
A) Safety shoes only
B) Gloves only
C) Full protective clothing, gloves, and respirator
D) Hard hat only
Rationale: Proper PPE protects workers from inhalation and skin
contact with asbestos fibers.
12. What is the minimum clearance standard for airborne asbestos
after abatement?
Practice Questions And Correct Answers
(Verified Answers) Plus Rationales
2025|2026 Q&A | Instant Download Pdf
1. Which federal agency regulates asbestos in the workplace?
A) FDA
B) EPA
C) OSHA
D) CDC
Rationale: OSHA sets standards for asbestos exposure and worker
protection in occupational settings.
2. What is the primary health risk associated with asbestos exposure?
A) Skin rash
B) Lung cancer and mesothelioma
C) Hearing loss
D) Vision problems
, Rationale: Inhalation of asbestos fibers can cause lung cancer,
mesothelioma, and asbestosis.
3. What type of respirator is typically required for asbestos abatement?
A) Surgical mask
B) NIOSH-approved P100 respirator
C) Cloth mask
D) Dust mask
Rationale: P100 respirators filter out 99.97% of airborne asbestos
fibers.
4. Which method is safest for removing friable asbestos?
A) Dry scraping
B) Wet removal
C) Sanding
D) Chipping
Rationale: Wet methods reduce airborne fiber release during
removal of friable asbestos.
5. What does friable asbestos mean?
A) Bound in cement
B) Easily crumbled or powdered by hand
C) Non-hazardous
D) Asbestos insulation only
Rationale: Friable asbestos can release fibers into the air easily,
posing higher health risks.
,6. How often should asbestos workers undergo medical surveillance?
A) Once a decade
B) Every 5 years
C) Only if symptoms appear
D) Annually
Rationale: OSHA requires annual medical examinations for workers
exposed to asbestos.
7. Which of the following is a Class I asbestos work activity?
A) Removing asbestos-containing floor tiles
B) Removing thermal system insulation
C) Encapsulating asbestos cement
D) Conducting air monitoring
Rationale: Class I work involves high-risk asbestos like TSI (pipes,
boilers).
8. Which is the first step in an asbestos abatement project?
A) Cleaning up debris
B) Conducting a survey and inspection
C) Applying sealant
D) Removing asbestos
Rationale: A proper survey identifies asbestos type, location, and
hazard level before work begins.
9. What is the purpose of negative air pressure units (NAPUs) in asbestos
abatement?
, A) Prevent asbestos fibers from escaping the work area
B) Heat the work area
C) Remove water
D) Increase ventilation for workers
Rationale: NAPUs maintain negative pressure to keep contaminated
air from leaving the containment area.
10. How should asbestos waste be transported?
A) In open containers
B) In leak-tight, labeled containers
C) Mixed with regular trash
D) In cardboard boxes
Rationale: OSHA and EPA require asbestos waste to be sealed,
labeled, and handled carefully to prevent fiber release.
11. Which of the following PPE is required during asbestos
abatement?
A) Safety shoes only
B) Gloves only
C) Full protective clothing, gloves, and respirator
D) Hard hat only
Rationale: Proper PPE protects workers from inhalation and skin
contact with asbestos fibers.
12. What is the minimum clearance standard for airborne asbestos
after abatement?
