FDNY F40 Operators Of Central Station
Signaling Systems Questions And Correct
Answers (Verified Answers) Plus Rationales
2026 Q&A | Instant Download Pdf
1. What is the primary responsibility of a Central Station Operator?
A. Responding to all fire alarms personally
B. Monitoring and managing alarm signals from multiple locations
C. Inspecting fire extinguishers
D. Performing fire drills in schools
B
Central Station Operators are tasked with monitoring alarm
systems and dispatching responses as needed.
2. Which of the following signals typically indicates a fire in a Central
Station system?
A. Trouble signal
B. Supervisory signal
C. Alarm signal
D. Tamper signal
C
An alarm signal indicates an actual fire or emergency requiring
immediate attention.
3. A “trouble signal” in a Central Station system generally indicates:
A. Fire has occurred
B. System malfunction or abnormal condition
C. False alarm
, D. Fire drill
B
Trouble signals notify the operator of a fault in the system that
may prevent proper operation.
4. Supervisory signals in a Central Station system are used to:
A. Notify of a fire
B. Indicate system maintenance or control issues
C. Trigger police response
D. Alert occupants
B
Supervisory signals often indicate valve tampering or control
equipment changes that need attention.
5. Tamper signals are generated when:
A. Fire is detected
B. System components are accessed or interfered with
C. Routine maintenance occurs
D. Power failure happens
B
Tamper signals alert operators that system devices may have been
physically interfered with.
6. Which device in a Central Station system initiates a fire alarm
signal?
A. Pull station
B. Smoke detector
C. Heat detector
D. All of the above
D
, Any initiating device, whether manual or automatic, can trigger an
alarm signal.
7. When a Central Station receives multiple alarms from the same
location, the operator should:
A. Ignore duplicate signals
B. Dispatch immediately as a high-priority incident
C. Wait for confirmation
D. Call the building manager
B
Multiple alarms indicate a serious situation and require immediate
response.
8. In a Central Station system, “duress” signals are primarily used to:
A. Report a fire
B. Alert police to an emergency
C. Notify a system malfunction
D. Indicate a power outage
B
Duress signals are intended to alert authorities to situations
involving personal danger.
9. Which of the following is NOT a common type of Central Station
signal?
A. Alarm
B. Supervisory
C. Duress
D. Fire drill
D
Fire drills are controlled exercises and not actual system signals.
, 10. Upon receiving a trouble signal, the operator should:
A. Ignore it until an alarm occurs
B. Investigate the cause and notify appropriate personnel
C. Immediately dispatch firefighters
D. Reset the system
B
Trouble signals require assessment and notification to ensure the
system functions correctly.
11. Which documentation must Central Station Operators
maintain?
A. Fire drill schedules only
B. Daily alarm logs and signal histories
C. Building permits
D. None
B
Operators are responsible for keeping accurate logs of alarms and
signals for compliance and reporting.
12. How should an operator handle a false alarm from a
monitored system?
A. Dispatch fire units immediately
B. Confirm with the site before taking action
C. Reset the system silently
D. Ignore it
B
Verification ensures emergency resources are not dispatched
unnecessarily.
Signaling Systems Questions And Correct
Answers (Verified Answers) Plus Rationales
2026 Q&A | Instant Download Pdf
1. What is the primary responsibility of a Central Station Operator?
A. Responding to all fire alarms personally
B. Monitoring and managing alarm signals from multiple locations
C. Inspecting fire extinguishers
D. Performing fire drills in schools
B
Central Station Operators are tasked with monitoring alarm
systems and dispatching responses as needed.
2. Which of the following signals typically indicates a fire in a Central
Station system?
A. Trouble signal
B. Supervisory signal
C. Alarm signal
D. Tamper signal
C
An alarm signal indicates an actual fire or emergency requiring
immediate attention.
3. A “trouble signal” in a Central Station system generally indicates:
A. Fire has occurred
B. System malfunction or abnormal condition
C. False alarm
, D. Fire drill
B
Trouble signals notify the operator of a fault in the system that
may prevent proper operation.
4. Supervisory signals in a Central Station system are used to:
A. Notify of a fire
B. Indicate system maintenance or control issues
C. Trigger police response
D. Alert occupants
B
Supervisory signals often indicate valve tampering or control
equipment changes that need attention.
5. Tamper signals are generated when:
A. Fire is detected
B. System components are accessed or interfered with
C. Routine maintenance occurs
D. Power failure happens
B
Tamper signals alert operators that system devices may have been
physically interfered with.
6. Which device in a Central Station system initiates a fire alarm
signal?
A. Pull station
B. Smoke detector
C. Heat detector
D. All of the above
D
, Any initiating device, whether manual or automatic, can trigger an
alarm signal.
7. When a Central Station receives multiple alarms from the same
location, the operator should:
A. Ignore duplicate signals
B. Dispatch immediately as a high-priority incident
C. Wait for confirmation
D. Call the building manager
B
Multiple alarms indicate a serious situation and require immediate
response.
8. In a Central Station system, “duress” signals are primarily used to:
A. Report a fire
B. Alert police to an emergency
C. Notify a system malfunction
D. Indicate a power outage
B
Duress signals are intended to alert authorities to situations
involving personal danger.
9. Which of the following is NOT a common type of Central Station
signal?
A. Alarm
B. Supervisory
C. Duress
D. Fire drill
D
Fire drills are controlled exercises and not actual system signals.
, 10. Upon receiving a trouble signal, the operator should:
A. Ignore it until an alarm occurs
B. Investigate the cause and notify appropriate personnel
C. Immediately dispatch firefighters
D. Reset the system
B
Trouble signals require assessment and notification to ensure the
system functions correctly.
11. Which documentation must Central Station Operators
maintain?
A. Fire drill schedules only
B. Daily alarm logs and signal histories
C. Building permits
D. None
B
Operators are responsible for keeping accurate logs of alarms and
signals for compliance and reporting.
12. How should an operator handle a false alarm from a
monitored system?
A. Dispatch fire units immediately
B. Confirm with the site before taking action
C. Reset the system silently
D. Ignore it
B
Verification ensures emergency resources are not dispatched
unnecessarily.
