MC6 Jumpmaster Exam Questions and
Answers 100% Pass
MC6 Main Parachute
Description - CORRECT ANSWER-Maneuverable, troop back, static line
deployed parachute.
MC6 Maximum Drop Speed - CORRECT ANSWER-150 knots
MC6 Main Parachute
Average Deployment Time - CORRECT ANSWER-Approximately 2.9 seconds
MC6 Main Parachute weight - CORRECT ANSWER-Approximately 38lbs
MC6 Main Parachute
Rate of Decent - CORRECT ANSWER-Approximately 13 ft per second with a
suspended weight of 200lbs.
MC6 Main Parachute 6
Major Components - CORRECT ANSWER-(DUCHRP) Deployment Bag,
Universal Static Line Modified, Canopy Assembly, Harness Assembly, Riser
Assembly, Pack Tray.
Universal Static Line Snap Hook
,Characteristics - CORRECT ANSWER-Approx 6in in length, 2in wide
Rated capacity of 1,750 lbs
Universal Static Line Modified
Characteristics - CORRECT ANSWER-Approx. 15 ft long
3/4 inch, tube edge, type 6.6 nylon webbing, yellow in color
Tensile strength of 4,000 lbs
Harness Assembly
Characteristics - CORRECT ANSWER-Primarily constructed of type VII nylon
Tensile strength of 5,500 lbs
Pack Tray Assembly
Characteristics - CORRECT ANSWER-Approx. 20 inches long by 16 inches wide
by 14 inches deep.
Nylon duck cloth weighing approx. 7.25 ounces per square yard.
Static line slack retainer band must have ____ serviceable static line slack retainer
bands attached to the _______________ in order to be serviceable. - CORRECT
ANSWER-2, static line slack retainer loop.
T-11 Reserve Parachute
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
,Characteristics - CORRECT ANSWER-Approx. 14.8 lbs
Nominal: Approx. 29 ft long
Aero conical in design
T-11 Reserve Parachute
Main Components - CORRECT ANSWER-Ripcord assembly *
Reserve closing loop *
Protection Cap
Ejector spring assembly
Reserve extractor
Reserve canopy
Reserve risers *
Reserve pack tray *
* Asterisk items are inspected during JMPI
Sustained Airborne Training must be conducted _____________ than _____
hours prior to the jump. - CORRECT ANSWER-no sooner, 48 hours
Sustained Airborne Training consists of ___ phases. - CORRECT ANSWER-
Three
, Actions in the aircraft brief (SERJT/E)
Pre-jump training
Parachute landing falls
SERJT/E guideline is: - CORRECT ANSWER-Static line control
Exiting procedures
Red light procedures
Jump refusals
Towed jumper procedures
Emergency procedures (reverse chalk order)
How many times will Mock Door training be executed? - CORRECT ANSWER-
As many times as the JMs feel necessary
*they are required to perform at least two exits*
Prior to pre-jump training, place the jumpers into a formation that
__________________________________________. - CORRECT ANSWER-
allows the JMs to easily control them and make on the spot corrections.
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
Answers 100% Pass
MC6 Main Parachute
Description - CORRECT ANSWER-Maneuverable, troop back, static line
deployed parachute.
MC6 Maximum Drop Speed - CORRECT ANSWER-150 knots
MC6 Main Parachute
Average Deployment Time - CORRECT ANSWER-Approximately 2.9 seconds
MC6 Main Parachute weight - CORRECT ANSWER-Approximately 38lbs
MC6 Main Parachute
Rate of Decent - CORRECT ANSWER-Approximately 13 ft per second with a
suspended weight of 200lbs.
MC6 Main Parachute 6
Major Components - CORRECT ANSWER-(DUCHRP) Deployment Bag,
Universal Static Line Modified, Canopy Assembly, Harness Assembly, Riser
Assembly, Pack Tray.
Universal Static Line Snap Hook
,Characteristics - CORRECT ANSWER-Approx 6in in length, 2in wide
Rated capacity of 1,750 lbs
Universal Static Line Modified
Characteristics - CORRECT ANSWER-Approx. 15 ft long
3/4 inch, tube edge, type 6.6 nylon webbing, yellow in color
Tensile strength of 4,000 lbs
Harness Assembly
Characteristics - CORRECT ANSWER-Primarily constructed of type VII nylon
Tensile strength of 5,500 lbs
Pack Tray Assembly
Characteristics - CORRECT ANSWER-Approx. 20 inches long by 16 inches wide
by 14 inches deep.
Nylon duck cloth weighing approx. 7.25 ounces per square yard.
Static line slack retainer band must have ____ serviceable static line slack retainer
bands attached to the _______________ in order to be serviceable. - CORRECT
ANSWER-2, static line slack retainer loop.
T-11 Reserve Parachute
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
,Characteristics - CORRECT ANSWER-Approx. 14.8 lbs
Nominal: Approx. 29 ft long
Aero conical in design
T-11 Reserve Parachute
Main Components - CORRECT ANSWER-Ripcord assembly *
Reserve closing loop *
Protection Cap
Ejector spring assembly
Reserve extractor
Reserve canopy
Reserve risers *
Reserve pack tray *
* Asterisk items are inspected during JMPI
Sustained Airborne Training must be conducted _____________ than _____
hours prior to the jump. - CORRECT ANSWER-no sooner, 48 hours
Sustained Airborne Training consists of ___ phases. - CORRECT ANSWER-
Three
, Actions in the aircraft brief (SERJT/E)
Pre-jump training
Parachute landing falls
SERJT/E guideline is: - CORRECT ANSWER-Static line control
Exiting procedures
Red light procedures
Jump refusals
Towed jumper procedures
Emergency procedures (reverse chalk order)
How many times will Mock Door training be executed? - CORRECT ANSWER-
As many times as the JMs feel necessary
*they are required to perform at least two exits*
Prior to pre-jump training, place the jumpers into a formation that
__________________________________________. - CORRECT ANSWER-
allows the JMs to easily control them and make on the spot corrections.
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
