AMT2 TEST BANK EXAM QUESTIONS AND
SOLUTIONS GRADED A+
⫸ distance from catenary. Answer: 3 feet for employee
3 feet for equipment
⫸ distance from signal line. Answer: 3 feet for employee
3 feet for equipment
⫸ what distance must a contractor maintain. Answer: 15 feet
⫸ distance from third rail. Answer: 6 inches
⫸ distance from unidentified dangling wires or objects. Answer: 15
feet
⫸ what is the first importance in the discharge of duty?. Answer:
safety
⫸ any occurrence or condition which could affect the electric
operation must be reported to?. Answer: power director or train
dispatcher
, ⫸ class c employees must take and pass amt-2. Answer: every two
years
⫸ which class of employee may work on high equipment while
under the energized catenary system?. Answer: NONE
⫸ what must be maintained between employees and exposed
energized lines or equipment at all times ?. Answer: minimum
approach distance
⫸ what is the minimum approach distance from a de energized non
grounded catenary system for a class c employee. Answer: 3 feet
⫸ who's responsibility is it to know that his/her equipment is
properly grounded?. Answer: equipment operator
⫸ what distance must be maintained by a class c employee from de-
energized ungrounded signal line. Answer: 3 feet
⫸ before proper protection is afforded which class of employee is
allowed to move dangling wire clear of the tracks?. Answer: NONE
protection must be provided
⫸ who orders a double pantograph instruction?. Answer: train
dispatcher
SOLUTIONS GRADED A+
⫸ distance from catenary. Answer: 3 feet for employee
3 feet for equipment
⫸ distance from signal line. Answer: 3 feet for employee
3 feet for equipment
⫸ what distance must a contractor maintain. Answer: 15 feet
⫸ distance from third rail. Answer: 6 inches
⫸ distance from unidentified dangling wires or objects. Answer: 15
feet
⫸ what is the first importance in the discharge of duty?. Answer:
safety
⫸ any occurrence or condition which could affect the electric
operation must be reported to?. Answer: power director or train
dispatcher
, ⫸ class c employees must take and pass amt-2. Answer: every two
years
⫸ which class of employee may work on high equipment while
under the energized catenary system?. Answer: NONE
⫸ what must be maintained between employees and exposed
energized lines or equipment at all times ?. Answer: minimum
approach distance
⫸ what is the minimum approach distance from a de energized non
grounded catenary system for a class c employee. Answer: 3 feet
⫸ who's responsibility is it to know that his/her equipment is
properly grounded?. Answer: equipment operator
⫸ what distance must be maintained by a class c employee from de-
energized ungrounded signal line. Answer: 3 feet
⫸ before proper protection is afforded which class of employee is
allowed to move dangling wire clear of the tracks?. Answer: NONE
protection must be provided
⫸ who orders a double pantograph instruction?. Answer: train
dispatcher
