jumpmaster Exam Questions and
Answers 100% PASS
T-11 Main Parachute
Characteristics - CORRECT ANSWER-Approx. 38 lbs
Modified cruciform planform in design
T-11 Main Parachute Safe Drop Speeds - CORRECT ANSWER-50 knots min.
150 knots max
T-11 Main Parachute
Average Deployment Time - CORRECT ANSWER-6.5 seconds
T-11 Main Parachute
Rate of Decent - CORRECT ANSWER-Approx. 18.5 feet per second with a
suspended weight of 400 lbs
T-11 Main Parachute
Major Components - CORRECT ANSWER-Universal static line modified *
Deployment bag
,Drogue parachute
Bridle assembly
Deployment sleeve
Canopy assembly
Slider
Riser assembly *
Harness assembly *
Pack tray
* Asterisk denotes only items seen or touched while performing JMPI
Universal Static Line Snap Hook
Characteristics - CORRECT ANSWER-Approx 6in in length, 2in wide
Rated capacity of 1,750 lbs
Universal Static Line Modified
Characteristics - CORRECT ANSWER-Approx. 15 ft long
3/4 inch, tube edge, type 6.6 nylon webbing, yellow in color
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
,Tensile strength of 4,000 lbs
Harness Assembly
Characteristics - CORRECT ANSWER-Primarily constructed of type VII nylon
Tensile strength of 5,500 lbs
Pack Tray Assembly
Characteristics - CORRECT ANSWER-Approx. 20 inches long by 16 inches wide
by 14 inches deep.
Nylon duck cloth weighing approx. 7.25 ounces per square yard.
Static line slack retainer band must have ____ serviceable static line slack retainer
bands attached to the _______________ in order to be serviceable. - CORRECT
ANSWER-2, static line slack retainer loop.
T-11 Reserve Parachute
Characteristics - CORRECT ANSWER-Approx. 14.8 lbs
Nominal: Approx. 29 ft long
Aero conical in design
T-11 Reserve Parachute
Main Components - CORRECT ANSWER-Ripcord assembly *
Reserve closing loop *
, Protection Cap
Ejector spring assembly
Reserve extractor
Reserve canopy
Reserve risers *
Reserve pack tray *
* Asterisk items are inspected during JMPI
Sustained Airborne Training must be conducted _____________ than _____
hours prior to the jump. - CORRECT ANSWER-no sooner, 48 hours
Sustained Airborne Training consists of ___ phases. - CORRECT ANSWER-
Three
Actions in the aircraft brief (SERJT/E)
Pre-jump training
Parachute landing falls
SERJT/E guideline is: - CORRECT ANSWER-Static line control
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
Answers 100% PASS
T-11 Main Parachute
Characteristics - CORRECT ANSWER-Approx. 38 lbs
Modified cruciform planform in design
T-11 Main Parachute Safe Drop Speeds - CORRECT ANSWER-50 knots min.
150 knots max
T-11 Main Parachute
Average Deployment Time - CORRECT ANSWER-6.5 seconds
T-11 Main Parachute
Rate of Decent - CORRECT ANSWER-Approx. 18.5 feet per second with a
suspended weight of 400 lbs
T-11 Main Parachute
Major Components - CORRECT ANSWER-Universal static line modified *
Deployment bag
,Drogue parachute
Bridle assembly
Deployment sleeve
Canopy assembly
Slider
Riser assembly *
Harness assembly *
Pack tray
* Asterisk denotes only items seen or touched while performing JMPI
Universal Static Line Snap Hook
Characteristics - CORRECT ANSWER-Approx 6in in length, 2in wide
Rated capacity of 1,750 lbs
Universal Static Line Modified
Characteristics - CORRECT ANSWER-Approx. 15 ft long
3/4 inch, tube edge, type 6.6 nylon webbing, yellow in color
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
,Tensile strength of 4,000 lbs
Harness Assembly
Characteristics - CORRECT ANSWER-Primarily constructed of type VII nylon
Tensile strength of 5,500 lbs
Pack Tray Assembly
Characteristics - CORRECT ANSWER-Approx. 20 inches long by 16 inches wide
by 14 inches deep.
Nylon duck cloth weighing approx. 7.25 ounces per square yard.
Static line slack retainer band must have ____ serviceable static line slack retainer
bands attached to the _______________ in order to be serviceable. - CORRECT
ANSWER-2, static line slack retainer loop.
T-11 Reserve Parachute
Characteristics - CORRECT ANSWER-Approx. 14.8 lbs
Nominal: Approx. 29 ft long
Aero conical in design
T-11 Reserve Parachute
Main Components - CORRECT ANSWER-Ripcord assembly *
Reserve closing loop *
, Protection Cap
Ejector spring assembly
Reserve extractor
Reserve canopy
Reserve risers *
Reserve pack tray *
* Asterisk items are inspected during JMPI
Sustained Airborne Training must be conducted _____________ than _____
hours prior to the jump. - CORRECT ANSWER-no sooner, 48 hours
Sustained Airborne Training consists of ___ phases. - CORRECT ANSWER-
Three
Actions in the aircraft brief (SERJT/E)
Pre-jump training
Parachute landing falls
SERJT/E guideline is: - CORRECT ANSWER-Static line control
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
