CERTIPORT ACTUAL UPDATED QUESTIONS AND ANSWERS
RATED A+
✔✔Without using rulers, place the vertical guide at 300 pixels. - ✔✔view>new
guide>vertical>300>okay
Go to the top menu, choose View menu and select New Guide. Set the vertical guide to
300. Click OK.
✔✔Using the selection tool, add the eye of the falcon to the active selection. - ✔✔Lasso
tool> hold shift key>click and drag the lasso around eye>release the tool
Use the lasso tool. Hold the Shift key and click and drag the lasso around the selection
of the eye. When you release the lasso tool, the eye should not have any of the
selection (marching ants) around it.
✔✔Select the sky using the tool that enables you to select a consistently colored area
with a single click. - ✔✔magic wand tool>click sky
Use the magic wand tool from the tool bar. You may have to click and hold the quick
select tool until you locate the magic wand. Click on the sky to select it.
✔✔Load the saved selection named Sky. - ✔✔Go to the top menu, go to the Select
menu, and choose Load Selection from the list. Choose Sky from the choices available.
✔✔Add a new horizontal text layer to the graphic that contains the text CLIMB. Accept
all default settings. - ✔✔Use the text tool and type out the word CLIMB in all caps.
✔✔Create a new style named HANG form the layer named HANGING. - ✔✔Click on
the HANGING layer in the layers palette. Next, locate the Styles tab just above the
layers palette. Click on the tiny menu next to the word Styles, and select New Style from
the list. Type in the name HANG (in all caps) and click OK.
✔✔Display the image in Print Size view. - ✔✔On the top menu, click on the View menu
and locate Print Size and select it.
✔✔Convert the image to a Smart Object, and then apply the Surface Blur Smart Filter.
Accept all other default settings. - ✔✔Go to the Filter Menu at the top, and select
Convert to Smart Filters. Then go back under the Filter Menu and go to Blur to Smart
Blur.
✔✔Using the Properties panel, adjust the Feather of the mask on the layer Vignette to
45px. - ✔✔Select the Vignette layer from the layers palette. Then go to the top menu,
locate Feather: and type in 45.
, ✔✔Add a new horizontal text layer to the graphic that contains the text Pug. Accept all
default settings. - ✔✔Click on the Text tool, click on the image, and type the word Pug
exactly as shown.
✔✔Create a new style named LOVE from the layer named LOVE ME. - ✔✔Click on the
LOVE ME layer in the layers palette. Next, locate the Styles tab just above the layers
palette. Click on the tiny menu next to the word Styles, and select New Style from the
list. Type in the name LOVE (in all caps) and click OK.
✔✔In the Background layer, sharpen the edges of the image, setting the amount to
100%, the radius to 1 pixel, and the threshold to 1. - ✔✔Go to the Filter menu at the top,
select Sharpen and the Unsharp Mask. Enter the settings as required by the question
and click OK.
✔✔Automatically adjust the image white and black point levels. - ✔✔Go to the image
menu at the top, click on Adjustments, then Levels. Click on the auto button when the
window appears. Click OK.
✔✔Increase the Background layer image contrast to +45. - ✔✔Go to the Image menu at
the top, select Adjustments, then Brightness/Contrast. Move the contrast slider to +45.
✔✔Change the selection to the inverse of the current selection. - ✔✔Go to the Select
menu at the top, click on Inverse.
✔✔Copy only the picture frame from the open file named picture 1, and then paste it in
the open file named wall 1. - ✔✔Use the rectangle marquee tool and select the picture
in the given image. Then go to the top Edit menu and select Copy. Go to the File menu
and select open, and scroll down the list until you locate wall 1 and open it. The go to
the Edit menu again and click paste. Keyboard shortcuts will not work.
✔✔Without using Grayscale mode, change the photograph so it is black and white.
Accept all other default settings. - ✔✔Go to the Image menu at the top, select
Adjustments and then Black & White. Click OK.
✔✔Create a layer group named Flowers that contains the images named Flower 1,
Flower 2, and Flower 3. - ✔✔Select the first Flower 1 layer. Hold the shift key and click
on the Flower 2 layer and then the Flower 3 layer. All three of the Flower layers should
be selected. Go to the mini menu next to the Layers tab and select New Group from
Layers. Name the group Flowers, exactly as shown in the question.
✔✔Covert the layer named Layer 1 to a Smart Object. - ✔✔From the layers palette,
click on the Layer 1 layer to select it. Then go to the Layer menu at the top, go down to
RATED A+
✔✔Without using rulers, place the vertical guide at 300 pixels. - ✔✔view>new
guide>vertical>300>okay
Go to the top menu, choose View menu and select New Guide. Set the vertical guide to
300. Click OK.
✔✔Using the selection tool, add the eye of the falcon to the active selection. - ✔✔Lasso
tool> hold shift key>click and drag the lasso around eye>release the tool
Use the lasso tool. Hold the Shift key and click and drag the lasso around the selection
of the eye. When you release the lasso tool, the eye should not have any of the
selection (marching ants) around it.
✔✔Select the sky using the tool that enables you to select a consistently colored area
with a single click. - ✔✔magic wand tool>click sky
Use the magic wand tool from the tool bar. You may have to click and hold the quick
select tool until you locate the magic wand. Click on the sky to select it.
✔✔Load the saved selection named Sky. - ✔✔Go to the top menu, go to the Select
menu, and choose Load Selection from the list. Choose Sky from the choices available.
✔✔Add a new horizontal text layer to the graphic that contains the text CLIMB. Accept
all default settings. - ✔✔Use the text tool and type out the word CLIMB in all caps.
✔✔Create a new style named HANG form the layer named HANGING. - ✔✔Click on
the HANGING layer in the layers palette. Next, locate the Styles tab just above the
layers palette. Click on the tiny menu next to the word Styles, and select New Style from
the list. Type in the name HANG (in all caps) and click OK.
✔✔Display the image in Print Size view. - ✔✔On the top menu, click on the View menu
and locate Print Size and select it.
✔✔Convert the image to a Smart Object, and then apply the Surface Blur Smart Filter.
Accept all other default settings. - ✔✔Go to the Filter Menu at the top, and select
Convert to Smart Filters. Then go back under the Filter Menu and go to Blur to Smart
Blur.
✔✔Using the Properties panel, adjust the Feather of the mask on the layer Vignette to
45px. - ✔✔Select the Vignette layer from the layers palette. Then go to the top menu,
locate Feather: and type in 45.
, ✔✔Add a new horizontal text layer to the graphic that contains the text Pug. Accept all
default settings. - ✔✔Click on the Text tool, click on the image, and type the word Pug
exactly as shown.
✔✔Create a new style named LOVE from the layer named LOVE ME. - ✔✔Click on the
LOVE ME layer in the layers palette. Next, locate the Styles tab just above the layers
palette. Click on the tiny menu next to the word Styles, and select New Style from the
list. Type in the name LOVE (in all caps) and click OK.
✔✔In the Background layer, sharpen the edges of the image, setting the amount to
100%, the radius to 1 pixel, and the threshold to 1. - ✔✔Go to the Filter menu at the top,
select Sharpen and the Unsharp Mask. Enter the settings as required by the question
and click OK.
✔✔Automatically adjust the image white and black point levels. - ✔✔Go to the image
menu at the top, click on Adjustments, then Levels. Click on the auto button when the
window appears. Click OK.
✔✔Increase the Background layer image contrast to +45. - ✔✔Go to the Image menu at
the top, select Adjustments, then Brightness/Contrast. Move the contrast slider to +45.
✔✔Change the selection to the inverse of the current selection. - ✔✔Go to the Select
menu at the top, click on Inverse.
✔✔Copy only the picture frame from the open file named picture 1, and then paste it in
the open file named wall 1. - ✔✔Use the rectangle marquee tool and select the picture
in the given image. Then go to the top Edit menu and select Copy. Go to the File menu
and select open, and scroll down the list until you locate wall 1 and open it. The go to
the Edit menu again and click paste. Keyboard shortcuts will not work.
✔✔Without using Grayscale mode, change the photograph so it is black and white.
Accept all other default settings. - ✔✔Go to the Image menu at the top, select
Adjustments and then Black & White. Click OK.
✔✔Create a layer group named Flowers that contains the images named Flower 1,
Flower 2, and Flower 3. - ✔✔Select the first Flower 1 layer. Hold the shift key and click
on the Flower 2 layer and then the Flower 3 layer. All three of the Flower layers should
be selected. Go to the mini menu next to the Layers tab and select New Group from
Layers. Name the group Flowers, exactly as shown in the question.
✔✔Covert the layer named Layer 1 to a Smart Object. - ✔✔From the layers palette,
click on the Layer 1 layer to select it. Then go to the Layer menu at the top, go down to
