Boater license Exam Questions with Correct Answers 100% Verified by Experts| 2025/2026
latest Update
bow front of the vessel
stern rear of the vessel
starboard right side of the vessel
port left side of the vessel
hull body of a vessel; basic structure or shell, there are two basic types displacement (push
water aside and cut through water with very little propulsion) and planing (rise up and glide on
top of the water when enough power is supplied)
gunwale upper edge of vessels side (gunnel)
cleat metal fitting on which a rope can be fastened
propeller rotates and powers a boat forward and backwards
beam maximum width of a vessel
freeboard distance from water to lowest point of the boat where the water could come on
board
draft depth of water needed to float a vessel
, keel main centerline (backbone) of a vessel or the extension of hull that increases stability in
the water
personal watercraft a small vessel that uses an inboard jet drive as its primary source of
propulsion and is designed to be operated by a person or persons sitting, standing or kneeling
on the vessel rather than inside the vessel
displacment mode a planing hull, when operated at very slow speeds, will cut through the
water like a displacement hull
plowing mode as speed increases, a planing hull will have a raised bow, reducing the
operators vision and throwing a very large wake. Avoid maintaining a speed that puts your boat
in plowing mode
planing mode your boat is in planing mode when enough power is applied so that the hull
glides on top of the water, different boats reach planing mode at different speeds
length overall length of the hull excluding any attachments
rudder steering device, usually a vertical blade attached to a post at, or near, the stern of a
boat
tiller lever used to turn a rudder to steer a boat
transom vertical surface at the back of the hull
impeller device used to force water in a desired direction under pressure
drive shaft the long stem connection between the motor and the impeller
latest Update
bow front of the vessel
stern rear of the vessel
starboard right side of the vessel
port left side of the vessel
hull body of a vessel; basic structure or shell, there are two basic types displacement (push
water aside and cut through water with very little propulsion) and planing (rise up and glide on
top of the water when enough power is supplied)
gunwale upper edge of vessels side (gunnel)
cleat metal fitting on which a rope can be fastened
propeller rotates and powers a boat forward and backwards
beam maximum width of a vessel
freeboard distance from water to lowest point of the boat where the water could come on
board
draft depth of water needed to float a vessel
, keel main centerline (backbone) of a vessel or the extension of hull that increases stability in
the water
personal watercraft a small vessel that uses an inboard jet drive as its primary source of
propulsion and is designed to be operated by a person or persons sitting, standing or kneeling
on the vessel rather than inside the vessel
displacment mode a planing hull, when operated at very slow speeds, will cut through the
water like a displacement hull
plowing mode as speed increases, a planing hull will have a raised bow, reducing the
operators vision and throwing a very large wake. Avoid maintaining a speed that puts your boat
in plowing mode
planing mode your boat is in planing mode when enough power is applied so that the hull
glides on top of the water, different boats reach planing mode at different speeds
length overall length of the hull excluding any attachments
rudder steering device, usually a vertical blade attached to a post at, or near, the stern of a
boat
tiller lever used to turn a rudder to steer a boat
transom vertical surface at the back of the hull
impeller device used to force water in a desired direction under pressure
drive shaft the long stem connection between the motor and the impeller
