Show Me Tell Me Driving - UK Driving Practical Test Questions and Answers | Latest Version | 2025/2026 | Correct & Verified

Show Me Tell Me Driving - UK Driving Practical Test Questions and Answers | Latest Version | 2025/2026 | Correct & Verified How would you check that the brakes are working before starting a journey? Press the brake pedal; it should feel firm, and the vehicle should not pull to one side. How do you check that the headlights and tail lights are working? Turn on the ignition and lights, then walk around the car to check they are illuminated. How would you check the indicators are working? Operate the hazard warning lights and check that all indicators flash correctly. How can you check the brake lights are working? Press the brake pedal and either ask someone to watch the lights or check reflections in windows or mirrors. How do you check the power-assisted steering is working before starting a journey? Turn the steering wheel just after moving off; it should feel light and responsive. How would you check the horn is working? Press the horn button and listen for the sound. 2 How do you check that the windscreen wipers and washers are working? Operate the wipers and press the washer control to ensure they spray and wipe correctly. How do you check that the brake fluid level is sufficient? Check the brake fluid reservoir; the fluid level should be between the minimum and maximum markings. How would you check the engine oil level? Pull out the dipstick, wipe it clean, reinsert it, then remove it to check the oil level is between the minimum and maximum marks. How do you check the engine coolant level? Check the coolant reservoir; the level should be between the minimum and maximum markings, and only check when the engine is cold. How would you check the windscreen washer fluid level? Open the washer reservoir cap and ensure the fluid is above the minimum mark or visible in the reservoir. How do you check that the headlights and tail lights are clean and not obscured? Visually inspect the lights to ensure they are clean and not broken or covered. 3 How would you check that the tyres have sufficient tread depth? Use a tread depth gauge or the built-in tread indicators; it should be at least 1.6mm across the central three-quarters of the tyre. How do you check that the tyres are safe and correctly inflated? Visually inspect for damage, cuts, or bulges, and check tyre pressures using a gauge against the manufacturer’s recommended values. How would you check that the indicators are clean and visible? Visually inspect the indicator lights on the vehicle to ensure they are not broken or obscured. How do you check that the brake lights are clean and not broken? Inspect the rear of the vehicle to ensure lights are intact and clear of dirt or damage. How would you check the horn is working without moving the car? Press the horn button while the engine is on and listen for the sound. How do you check that the power steering is working after moving off? Steering should feel light and responsive when turning the wheel during normal driving. How would you check that the windscreen wipers clear the screen properly? Turn on the wipers and washers; the windscreen should be clear and wipe evenly. 4 How do you check the brake fluid level is not below the minimum? Locate the reservoir and ensure the fluid is between the minimum and maximum markers. How would you check the oil level when the engine is cold? Pull out the dipstick, wipe clean, reinsert,