VIVINT SHP ACTUAL EXAM PAPER 2026
QUESTIONS WITH SOLUTIONS GRADED A+
◉ True or false when performing a full system test you may bypass any
open doors or windows. Answer: False
◉ When programming and SKEY1 you must: Answer: Always enable
the emergency key
◉ True or false when running power to the take-345, polarity does not
matter. Answer: False
◉ Select all that apply when programming the emergency key for
SKEY1 one which zone/sensor types are recommended to use. Answer:
Audible alarm 07 auxiliary alarm 08
◉ True or false when installing a SMKT3 you must use the included
screws and anchors. Answer: True
◉ True or false when installing the fire fighter it is required to test the
customers existing smoke detectors. Answer: True
, ◉ When installing a DW 21 where is the approved location for the
sensor. Answer: Between 6 inches (15cm) and 2 inches (61cm) from the
floor
◉ When installing a DW11 on a vinyl or metal frame what should you
primarily use to mount the sensor. Answer: Provided double-sided tape
◉ Select all that apply which of the following materials can you use to
group multiple ground terminals in the takeover module. Answer: B
connectors/beans and Wire caps
◉ Which of the following sensors are not allowed to program using a
translator. Answer: Smoke detector
◉ True or false when installing the take 345 you must always test the
new 12 V battery before using it. Answer: True
◉ What is the output voltage of the transformer used to power the Smart
hub. Answer: 12 VDC
◉ What is the minimum distance for placement of a CO3 from the
corners on a wall. Answer: 12 inches (30 cm)
◉ True or false the SMK3 has only two functions: smoke and heat
detection. Answer: False
QUESTIONS WITH SOLUTIONS GRADED A+
◉ True or false when performing a full system test you may bypass any
open doors or windows. Answer: False
◉ When programming and SKEY1 you must: Answer: Always enable
the emergency key
◉ True or false when running power to the take-345, polarity does not
matter. Answer: False
◉ Select all that apply when programming the emergency key for
SKEY1 one which zone/sensor types are recommended to use. Answer:
Audible alarm 07 auxiliary alarm 08
◉ True or false when installing a SMKT3 you must use the included
screws and anchors. Answer: True
◉ True or false when installing the fire fighter it is required to test the
customers existing smoke detectors. Answer: True
, ◉ When installing a DW 21 where is the approved location for the
sensor. Answer: Between 6 inches (15cm) and 2 inches (61cm) from the
floor
◉ When installing a DW11 on a vinyl or metal frame what should you
primarily use to mount the sensor. Answer: Provided double-sided tape
◉ Select all that apply which of the following materials can you use to
group multiple ground terminals in the takeover module. Answer: B
connectors/beans and Wire caps
◉ Which of the following sensors are not allowed to program using a
translator. Answer: Smoke detector
◉ True or false when installing the take 345 you must always test the
new 12 V battery before using it. Answer: True
◉ What is the output voltage of the transformer used to power the Smart
hub. Answer: 12 VDC
◉ What is the minimum distance for placement of a CO3 from the
corners on a wall. Answer: 12 inches (30 cm)
◉ True or false the SMK3 has only two functions: smoke and heat
detection. Answer: False
