NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
When checking the solution of an IV bag, what are 5 things you want to check?
-expiration date
-look for any leaks
-look for any discoloration
-look for any particles
-check to make sure you have the correct solution and that it would be compatible with any other
IVs the patient has
what are two ways IV medication can be administered?
-gravity
-infusion pump
how full should you prepare the drip chamber to?
about 1/2 full of solution
when priming IV tubing, what is one important thing to remember?
prime the tubing slowly to prevent getting air bubbles in the tubing
, NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
what is the purpose of an anti-reflux valve?
to prevent medication and/or other things in the IV tubing from going into the primary IV bag
when would you administer medications through the IV port closest to the patient?
when giving IV push medications; this allows you to inject at the correct rate
when would you administer medications through the IV port farthest away from the patient?
when administering IV piggyback meds
when is the use of vented tubing necessary? Why?
when giving medications in a glass bottle; allows the medication to flow out (won't create a
vacuum inside the glass bottle)
how would you regulate the flow rate of an IV without a pump?
regulate using the roller clamp and watching to make sure it is flowing at the correct rate (i.e.,
count drips/min)
what are 5 factors that influence flow rate?
-warm fluids drip faster than cold
, NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
-the higher the bag above insertion, the faster the infusion
-the larger the catheter diameter, the faster the flow rate
-the longer the catheter, the rate is slower due to resistance
-hand position
true or false: the higher the drip factor means smaller drops
true
how do you calculate mL/hr?
total volume divided by total time in hours
how do you calculate drops per minute?
(drop factor divided by 60) times the flow rate in mL/hr
OR
mL/hr divided by the "reduced drop factor number"
what is the reduced number for drop factor of 10?
6
, NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
what is the reduced number for a drop factor of 15?
4
what is the reduced number for a drop factor of 20?
3
what is the reduced number for a drop factor of 60?
1
what are 2 things to remember when you have a drop factor of 60?
-also called microdrip
-the drops/min will be the same as mL/hr
what is an abbreviation for drops/min?
gtt/min
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
When checking the solution of an IV bag, what are 5 things you want to check?
-expiration date
-look for any leaks
-look for any discoloration
-look for any particles
-check to make sure you have the correct solution and that it would be compatible with any other
IVs the patient has
what are two ways IV medication can be administered?
-gravity
-infusion pump
how full should you prepare the drip chamber to?
about 1/2 full of solution
when priming IV tubing, what is one important thing to remember?
prime the tubing slowly to prevent getting air bubbles in the tubing
, NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
what is the purpose of an anti-reflux valve?
to prevent medication and/or other things in the IV tubing from going into the primary IV bag
when would you administer medications through the IV port closest to the patient?
when giving IV push medications; this allows you to inject at the correct rate
when would you administer medications through the IV port farthest away from the patient?
when administering IV piggyback meds
when is the use of vented tubing necessary? Why?
when giving medications in a glass bottle; allows the medication to flow out (won't create a
vacuum inside the glass bottle)
how would you regulate the flow rate of an IV without a pump?
regulate using the roller clamp and watching to make sure it is flowing at the correct rate (i.e.,
count drips/min)
what are 5 factors that influence flow rate?
-warm fluids drip faster than cold
, NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
-the higher the bag above insertion, the faster the infusion
-the larger the catheter diameter, the faster the flow rate
-the longer the catheter, the rate is slower due to resistance
-hand position
true or false: the higher the drip factor means smaller drops
true
how do you calculate mL/hr?
total volume divided by total time in hours
how do you calculate drops per minute?
(drop factor divided by 60) times the flow rate in mL/hr
OR
mL/hr divided by the "reduced drop factor number"
what is the reduced number for drop factor of 10?
6
, NSG 317 Exam 1 | Questions and
Verified Answers (Latest 2026/ 2027
Update) | Grade A | 100% Correct
what is the reduced number for a drop factor of 15?
4
what is the reduced number for a drop factor of 20?
3
what is the reduced number for a drop factor of 60?
1
what are 2 things to remember when you have a drop factor of 60?
-also called microdrip
-the drops/min will be the same as mL/hr
what is an abbreviation for drops/min?
gtt/min
