CENSECFOR OPERATOR TRAINING EXAM
FINAL STUDY GUIDE 2026 TESTED QUERIES
SOLVED
◉ Which of the below statements best describes weapons condition
code 4? Answer: Safety on, magazine removed, chamber empty, bolt
forward, ejection port cover closed.
◉ What is the maximum effective range of the M16A3 service rifle?
Answer: 1804 ft. (550 m)
◉ Which major component group of the M16A3 service rifle consist
of the ejection port, the ejection port cover, and the housing for the
bolt carrier key? Answer: Upper Receiver Assembly
◉ A safety function should be performed when? Answer: Anytime
rifle is reassembled.
◉ Safety Rule 1 Answer: Treat every weapon as if it were loaded.
◉ Safety Rule 2 Answer: Never point a weapon at anything you do
not intend to shoot.
,◉ Safety Rule 3 Answer: Keep your finger straight and off the trigger
until ready to fire.
◉ Safety Rule 4 Answer: Keep the weapon on safe until you intend to
fire.
◉ What is the muzzle velocity of the M16A3 service rifle? Answer:
3,100 fps (945 mps)
◉ Which stoppage is associated with a lower report or reduced
recoil? Answer: Audible pop and reduced recoil caused by "Only a
portion of the propellant is ignited."
◉ Which weapon (M4A1 / M16A3) has the greater maximum
effective range? Answer: M16A3
◉ Which type of stoppage usually occurs as a result of not seating
the magazine? Answer: Bolt Forward
◉ What is "Danger"? Answer: An operating or maintenance
procedure, practice, condition, statement, etc., which if not strictly
observed, WILL result in serious injury to, or death to personnel, or
threatens the primary mission of the ship.
, ◉ The remedial action steps below would be used to fix which
stoppage?
1. Press the magazine catch release, remove the empty magazine,
and stow it on person if time permits.
2. Insert a filled magazine into the magazine well and tug downward
on the magazine to ensure it is properly seated.
3. Pull the charging handle to the rear and then release it to allow
the bolt to move forward and chamber a round.
4. Sight in and attempt to fire. Answer: Bolt locked to the rear.
◉ What common stoppage is characterized by a double feed?
Answer: Brass is obstructing the chamber area.
◉ What is the first step in the clearing barrel LOAD procedure?
Answer: Attempt to place the selector lever in the SAFE position.
◉ A clearing barrel provide a safe direction in which to point a
weapon when performing all of the following "load, unload, unload
show clear, make ready" except? Answer: Make ready
◉ What are the magazine capacities for the M16A3/M4A1 service
rifle in meters? Answer: 20 or 30 rounds.
FINAL STUDY GUIDE 2026 TESTED QUERIES
SOLVED
◉ Which of the below statements best describes weapons condition
code 4? Answer: Safety on, magazine removed, chamber empty, bolt
forward, ejection port cover closed.
◉ What is the maximum effective range of the M16A3 service rifle?
Answer: 1804 ft. (550 m)
◉ Which major component group of the M16A3 service rifle consist
of the ejection port, the ejection port cover, and the housing for the
bolt carrier key? Answer: Upper Receiver Assembly
◉ A safety function should be performed when? Answer: Anytime
rifle is reassembled.
◉ Safety Rule 1 Answer: Treat every weapon as if it were loaded.
◉ Safety Rule 2 Answer: Never point a weapon at anything you do
not intend to shoot.
,◉ Safety Rule 3 Answer: Keep your finger straight and off the trigger
until ready to fire.
◉ Safety Rule 4 Answer: Keep the weapon on safe until you intend to
fire.
◉ What is the muzzle velocity of the M16A3 service rifle? Answer:
3,100 fps (945 mps)
◉ Which stoppage is associated with a lower report or reduced
recoil? Answer: Audible pop and reduced recoil caused by "Only a
portion of the propellant is ignited."
◉ Which weapon (M4A1 / M16A3) has the greater maximum
effective range? Answer: M16A3
◉ Which type of stoppage usually occurs as a result of not seating
the magazine? Answer: Bolt Forward
◉ What is "Danger"? Answer: An operating or maintenance
procedure, practice, condition, statement, etc., which if not strictly
observed, WILL result in serious injury to, or death to personnel, or
threatens the primary mission of the ship.
, ◉ The remedial action steps below would be used to fix which
stoppage?
1. Press the magazine catch release, remove the empty magazine,
and stow it on person if time permits.
2. Insert a filled magazine into the magazine well and tug downward
on the magazine to ensure it is properly seated.
3. Pull the charging handle to the rear and then release it to allow
the bolt to move forward and chamber a round.
4. Sight in and attempt to fire. Answer: Bolt locked to the rear.
◉ What common stoppage is characterized by a double feed?
Answer: Brass is obstructing the chamber area.
◉ What is the first step in the clearing barrel LOAD procedure?
Answer: Attempt to place the selector lever in the SAFE position.
◉ A clearing barrel provide a safe direction in which to point a
weapon when performing all of the following "load, unload, unload
show clear, make ready" except? Answer: Make ready
◉ What are the magazine capacities for the M16A3/M4A1 service
rifle in meters? Answer: 20 or 30 rounds.
