Certified Playground Safety Inspector CPSI Sample
Exam | Most Recent Exam 2026 Actual Complete Real
Exam Questions And Correct Answers||Newest
Exam!!! (Verified Answers) Already Graded A+
|Guaranteed Success!! Newest Exam!!!
To be compliant with ASTM 1487, a designer or
manufacturer of playground equipment should - Answers-
provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether
or not a hazard exists on - Answers-a partially bounded
opening
3. Which of the following is correct regarding the impact-
attenuation of surfacing material - Answers-Critical height
must equal or exceed fall height
4. When evaluating the structural integrity of a support
structure for a swing that appears to be failing, a CPSI
should - Answers-hire a licensed professional engineer to
certify the integrity of the equipment
, 2|Page
6. The majority of injuries associated with playground
equipment result from - Answers-falls to the surface on
which the equipment was located
7. An opening may present a common crush or shear
hazard only if it - Answers-grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes
meeting requirements of - Answers-ASTM F1292 and
F1487
9. Regarding playground safety signage, which of the
following is correct - Answers-Signage may not prevent
accidents but may reduce liability
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing -
Answers-Type of surfacing and amount of use
11. When planning a playground for public use, the play
equipment that is chosen must - Answers-be appropriate
for the age of intended users