2026/2027
Gmail:
27
TSA Technology Bowl Questions
with Detailed Verified Answers
The rudder is a moveable ______-control surface Ans: Yaw
The Manhattan Project was a government-sponsored research project
that eventually would provide the foundation for which of the
following technologies? Ans: Nuclear power
Which of the following is an example of reverse engineering? Ans:
Disassembling a device to determine its internal mechanisms
In manufacturing and engineering, tolerance refers to Ans: A
permissible deviation from a specification
What type of line is part of a dimension? Ans: Extension Line
When a plane is in flight the highest air pressure is found where? (In
relation to the wing itself) Ans: In front
A circular garden has a radius of 12 feet. If the garden is enlarged so
that its new radius is 24 feet, by what factor will the garden's area
increase? Ans: 2
A manufacturing company is producing dowels that have a diameter of
8.5 mm ± 0.1 mm. The hole the dowel must fit into has a diameter of
9.0 mm ± 0.1 mm. According to these specifications, what is the
greatest clearance that can occur between the two parts? Ans: 0.7 mm
Which of the following is an important component of a solution used
to clean up a blood spill on a workplace floor? Ans: Chlorine bleach
A design engineer would like to determine the diameter of a circle. He
begins by using a straightedge to draw a line tangent to the circle.
Which of the following steps would be most appropriate next? Ans:
Gmail:
27
TSA Technology Bowl Questions
with Detailed Verified Answers
The rudder is a moveable ______-control surface Ans: Yaw
The Manhattan Project was a government-sponsored research project
that eventually would provide the foundation for which of the
following technologies? Ans: Nuclear power
Which of the following is an example of reverse engineering? Ans:
Disassembling a device to determine its internal mechanisms
In manufacturing and engineering, tolerance refers to Ans: A
permissible deviation from a specification
What type of line is part of a dimension? Ans: Extension Line
When a plane is in flight the highest air pressure is found where? (In
relation to the wing itself) Ans: In front
A circular garden has a radius of 12 feet. If the garden is enlarged so
that its new radius is 24 feet, by what factor will the garden's area
increase? Ans: 2
A manufacturing company is producing dowels that have a diameter of
8.5 mm ± 0.1 mm. The hole the dowel must fit into has a diameter of
9.0 mm ± 0.1 mm. According to these specifications, what is the
greatest clearance that can occur between the two parts? Ans: 0.7 mm
Which of the following is an important component of a solution used
to clean up a blood spill on a workplace floor? Ans: Chlorine bleach
A design engineer would like to determine the diameter of a circle. He
begins by using a straightedge to draw a line tangent to the circle.
Which of the following steps would be most appropriate next? Ans:
