Alberta Forklif t Operator Certification Exam
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of a forklift?
a) Transport personnel
b) Lift and move materials
c) Excavation of soil
d) Paving roads
Forklifts are designed specifically for lifting and transporting
materials over short distances.
2. Before operating a forklift, the operator should:
a) Eat a full meal
b) Inspect the forklift for defects
c) Test the horn continuously
d) Remove all safety devices
Pre-operational inspections ensure the forklift is safe to use and
helps prevent accidents.
3. What should an operator do if a load is too heavy for the forklift’s
capacity?
a) Attempt to lift it slowly
b) Do not lift the load and report the issue
c) Tilt the forks backward
d) Lift it from the side
, Exceeding load capacity can cause tip-overs or equipment
damage.
4. The center of gravity of a forklift:
a) Does not affect stability
b) Shifts when a load is lifted
c) Remains fixed at the operator’s seat
d) Only matters when turning corners
Lifting a load changes the forklift’s center of gravity, affecting
stability.
5. When traveling with a load, the forks should be:
a) Fully raised
b) Just above the ground
c) Tilted forward
d) Level with the operator’s chest
Keeping the load low reduces the risk of tipping and increases
visibility.
6. What is the correct action when approaching an intersection in a
warehouse?
a) Accelerate to pass quickly
b) Slow down and sound the horn
c) Stop in the middle
d) Travel as normal
Slowing down and signaling helps prevent collisions with
pedestrians or other forklifts.
7. Which type of fire extinguisher is appropriate for a forklift engine
fire?
a) Water
, b) Class B or ABC
c) Foam only
d) Dry ice
Forklift engines often involve flammable liquids; Class B or ABC
extinguishers are suitable.
8. When stacking loads, the operator should:
a) Stack higher than recommended
b) Ensure stacks are stable and within height limits
c) Tilt forks forward to push
d) Stack on uneven surfaces
Stable, within-limit stacks prevent tipping and falling objects.
9. Which factor does NOT affect forklift stability?
a) Load weight
b) Fork height
c) Turning radius
d) Color of the forklift
Forklift stability is affected by physical factors, not appearance.
10. A “tip-over” can occur when:
a) Driving slowly
b) Turning too sharply with a high load
c) Parking on level ground
d) Lifting no load
Sharp turns, especially with high or uneven loads, can cause
tipping.
11. When carrying a long load, the operator should:
a) Drive in reverse only
b) Use a spotter if visibility is blocked
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of a forklift?
a) Transport personnel
b) Lift and move materials
c) Excavation of soil
d) Paving roads
Forklifts are designed specifically for lifting and transporting
materials over short distances.
2. Before operating a forklift, the operator should:
a) Eat a full meal
b) Inspect the forklift for defects
c) Test the horn continuously
d) Remove all safety devices
Pre-operational inspections ensure the forklift is safe to use and
helps prevent accidents.
3. What should an operator do if a load is too heavy for the forklift’s
capacity?
a) Attempt to lift it slowly
b) Do not lift the load and report the issue
c) Tilt the forks backward
d) Lift it from the side
, Exceeding load capacity can cause tip-overs or equipment
damage.
4. The center of gravity of a forklift:
a) Does not affect stability
b) Shifts when a load is lifted
c) Remains fixed at the operator’s seat
d) Only matters when turning corners
Lifting a load changes the forklift’s center of gravity, affecting
stability.
5. When traveling with a load, the forks should be:
a) Fully raised
b) Just above the ground
c) Tilted forward
d) Level with the operator’s chest
Keeping the load low reduces the risk of tipping and increases
visibility.
6. What is the correct action when approaching an intersection in a
warehouse?
a) Accelerate to pass quickly
b) Slow down and sound the horn
c) Stop in the middle
d) Travel as normal
Slowing down and signaling helps prevent collisions with
pedestrians or other forklifts.
7. Which type of fire extinguisher is appropriate for a forklift engine
fire?
a) Water
, b) Class B or ABC
c) Foam only
d) Dry ice
Forklift engines often involve flammable liquids; Class B or ABC
extinguishers are suitable.
8. When stacking loads, the operator should:
a) Stack higher than recommended
b) Ensure stacks are stable and within height limits
c) Tilt forks forward to push
d) Stack on uneven surfaces
Stable, within-limit stacks prevent tipping and falling objects.
9. Which factor does NOT affect forklift stability?
a) Load weight
b) Fork height
c) Turning radius
d) Color of the forklift
Forklift stability is affected by physical factors, not appearance.
10. A “tip-over” can occur when:
a) Driving slowly
b) Turning too sharply with a high load
c) Parking on level ground
d) Lifting no load
Sharp turns, especially with high or uneven loads, can cause
tipping.
11. When carrying a long load, the operator should:
a) Drive in reverse only
b) Use a spotter if visibility is blocked
