MSSC - Manufacturing Processes, Production
Questions with Accurate Solutions
____ is a planning tool that expands MRP to include other departments in planning
production. - MRPII
______ are used to life the work piece off the bottom of the vice. - Parallels
______ includes any materials that have been issued to a manufacturing order that
have not been produced into a finished product. - Work-in-progress inventory
______ saves a company money because it reduces the cost associated with
maintaining a large inventory of items. - JIT
A ____ is mounted on a shaft by means of a key. - cam
A ______ is a list of all the materials and components required to make the product and
the quantity of each. - bill of materials
A ______ linkage changes rotary motion into reciprocating (back and forth) motion. -
slider crank
A ______ punch is used to create a very small indentation. - prick
A built-up edge condition of a cutting tool causes it to ______. - cut more deeply
A cam is a wheel that, when combined with a cam follower, produces a(n) ______
motion. - reciprocating
A counterbore ______. - enlarges a hole for a portion of its depth
A counterbore has a ______. - pilot
A counterbore should be ______ larger than the head of the socket to be used. - 1/64"
A drill press will under-size the holes if the ______. - drill bit has a worn margin
A force that makes an object rotate about a point is called ______. - torque
A frequency chart is typcally used to establish ______. - sampling plans
A process's ______ is the rate at which a production system creates a finished product.
- capacity
, A reamer is fed into into a pre-drilled hold ______. - using one smooth, constant
pressure operation
A second-class lever has its ______. - load between the fulcrum and the effort arm
A spring scale is used to measure ______. - force
A tap looks like a ______. - screw
A third-class lever has its ______. - effort arm between the fulcrum and the load
A thorough check for a history of similar problems should occur ______. - on problems
that keep recurring at regular intervals
A wheel reduces friction because _____ friction is less than sliding friction. - rolling
A(n) ______ is produced when forces applied to a lever cause it to rotate. - rotational
moment
An announcement system called ______ (Japanese for signboard) is used to announce
the need for reactive maintenance. - andon
An important requirement in order to achieve just-in-time manufacturing is to ______. -
schedule jobs well
An increase in the number of inspections is not likely to ______. - reduce the number of
parts that are out of spec
As part of a continuous improvement, companies use ______ to set goals to strive
towards. - product benchmarks
As part of a(n) ______, manufacturing see end of line inspections as one form of waste.
- lean manufacturing process
Companies strive to eliminate waste and non value added work through a process of
______. - continuous improvement
Companies use ______ to determine how manufacturing methods are most likely to fail.
- Process Failure Mode and Effect Analysis (PFMEA)
Companies use ______ to show data about the progress of production. - job status
reports
Creating backorders allows a company to save money by ______. - waiting util a large
order comes in, allowing the setup cost to be shared across a large number of items
Questions with Accurate Solutions
____ is a planning tool that expands MRP to include other departments in planning
production. - MRPII
______ are used to life the work piece off the bottom of the vice. - Parallels
______ includes any materials that have been issued to a manufacturing order that
have not been produced into a finished product. - Work-in-progress inventory
______ saves a company money because it reduces the cost associated with
maintaining a large inventory of items. - JIT
A ____ is mounted on a shaft by means of a key. - cam
A ______ is a list of all the materials and components required to make the product and
the quantity of each. - bill of materials
A ______ linkage changes rotary motion into reciprocating (back and forth) motion. -
slider crank
A ______ punch is used to create a very small indentation. - prick
A built-up edge condition of a cutting tool causes it to ______. - cut more deeply
A cam is a wheel that, when combined with a cam follower, produces a(n) ______
motion. - reciprocating
A counterbore ______. - enlarges a hole for a portion of its depth
A counterbore has a ______. - pilot
A counterbore should be ______ larger than the head of the socket to be used. - 1/64"
A drill press will under-size the holes if the ______. - drill bit has a worn margin
A force that makes an object rotate about a point is called ______. - torque
A frequency chart is typcally used to establish ______. - sampling plans
A process's ______ is the rate at which a production system creates a finished product.
- capacity
, A reamer is fed into into a pre-drilled hold ______. - using one smooth, constant
pressure operation
A second-class lever has its ______. - load between the fulcrum and the effort arm
A spring scale is used to measure ______. - force
A tap looks like a ______. - screw
A third-class lever has its ______. - effort arm between the fulcrum and the load
A thorough check for a history of similar problems should occur ______. - on problems
that keep recurring at regular intervals
A wheel reduces friction because _____ friction is less than sliding friction. - rolling
A(n) ______ is produced when forces applied to a lever cause it to rotate. - rotational
moment
An announcement system called ______ (Japanese for signboard) is used to announce
the need for reactive maintenance. - andon
An important requirement in order to achieve just-in-time manufacturing is to ______. -
schedule jobs well
An increase in the number of inspections is not likely to ______. - reduce the number of
parts that are out of spec
As part of a continuous improvement, companies use ______ to set goals to strive
towards. - product benchmarks
As part of a(n) ______, manufacturing see end of line inspections as one form of waste.
- lean manufacturing process
Companies strive to eliminate waste and non value added work through a process of
______. - continuous improvement
Companies use ______ to determine how manufacturing methods are most likely to fail.
- Process Failure Mode and Effect Analysis (PFMEA)
Companies use ______ to show data about the progress of production. - job status
reports
Creating backorders allows a company to save money by ______. - waiting util a large
order comes in, allowing the setup cost to be shared across a large number of items
