Scheduled maintenance: January 16, 2026 from 09:00 AM to 11:00 AM
CE200 Quiz 3 Exam Questions & Answers | 100%
Verified solutions |Questions with Correct
Answers 2026 latest update!!
Save
Terms in this set (18)
Moisture in timber -Is stored in the cell cavity (absorbed or free
moisture)
-Is stored in the cell wall (absorbed or bound
moisture)
-Must have evaporation first deplete the absorbed
moisture before having any of the absorbed
moisture begin to evaporate
An important difference between -Softwood trees grow faster, taller, and longer
hardwood and softwood trees for between branches than hardwood tree
civil engineering construction, as far -Timber from softwood trees is less costly than
as economy and usability is timber from hardwood trees
concerned is:
https://quizlet.com/1131533722/ce200-quiz-3-exam-questions-answers-100-verified-solutions-questions-with-correct-answers-2026-latest-update-flash… 1/5
, 1/16/26, 7:49 AM CE200 Quiz 3 Exam Questions & Answers | 100% Verified solutions |Questions with Correct Answers 2026 latest update!! Flashcar…
Wood is an extremely desirable civil -It is a low-cost material where trees are available
engineering construction material -Is is a strong material with good strength to
because: weight ratio and can be very durable if properly
seasoned and maintained
-It is easy to work with and can be transformed to
different shapes and forms to fit specific demands
quickly
-It is highly recyclable in the form it had been used
originally and not by having to be reprocessed to
be reused.
Wood is a unique civil engineering -Being a biogenic material, it is a renewable
construction material b/c material
-it has very low heat absorbency and emissivity
-It has superior resistance to mechanical shock
Timber used in civil engineering -Exogenous trees that have annual or annular
construction is sourced from: growth rings
-Softwood
-Evergreen trees that have needle leaves
When all the absorbed or free -At which point, depending on the type of the tree,
moisture has evaporated the wood the timber moisture content may reach, 21%-32%
or timber reaches its fiber saturation -Any loss of adsorbed or bound moisture, no
point matter how small, would cause large amounts of
shrinkage, resulting in deformation
-Loss of moisture in the wood or timber beyond
the fiber saturation point, physical properties of the
wood or timber would change.
https://quizlet.com/1131533722/ce200-quiz-3-exam-questions-answers-100-verified-solutions-questions-with-correct-answers-2026-latest-update-flash… 2/5