Page 1 of 59
FF2 FINAL EXAM NEWEST VERSION WITH
COMPLETE QUESTIONS AND CORRECT ANSWERS
JUST RELEASED THIS YEAR
Question: When using an in-line eductor, which of the following might cause foam
concentrations to be too lean?
A.Solid agent stick too cold to dissolve effectively.
B.Air compressor filter clogged, dirty, or water-soaked
C.Too little hose between eductor and discharge nozzle
D.Foam concentrate inlet too far above surface of foam concentrate - CORRECT
ANSWER✔✔D.Foam concentrate inlet too far above surface of foam concentrate
Question: Which of the following foam generators produces foam by pumping foam solution
through the nozzle in a fine spray?
A.Fog nozzle
B.Air-aspirating type nozzle
C.Water-aspirating type nozzle
1
SUCCESS!
,Page 2 of 59
D.Mechanical blower generator - CORRECT ANSWER✔✔C.Water-aspirating type nozzle
Question: Poor-quality foam may result from:
A.high pressure in the supply line.
B.a short hose lay on the discharge side.
C.air leaks at fittings causing a loss of suction.
D.the nozzle being located too far below the eductor. - CORRECT ANSWER✔✔C.air leaks at
fittings causing a loss of suction.
Question: A common reason for generating poor-quality foam is:
A.equipment is older than five years.
B.eductor and nozzle flow ratings match.
C.nozzle remains fully open during the process.
D.mixing different types of foam concentrate in the same tank. - CORRECT ANSWER✔✔D.mixing
different types of foam concentrate in the same tank.
2
SUCCESS!
,Page 3 of 59
Question: Which strategy is typically selected when property is not salvageable?
A.Direct
B.Indirect
C.Offensive
D.Defensive - CORRECT ANSWER✔✔D.Defensive
Question: Which strategic transition may be necessary when the situation rapidly changes?
A.Indirect to direct
B.Direct to indirect
C.Offensive to defensive
D.Defensive to offensive - CORRECT ANSWER✔✔C.Offensive to defensive
Question: Which of the following guidelines should be used when switching strategies?
A.Turn off radios in order to maintain radio silence
B.Abandon hoselines when strategy change is made
C.Split away from team in order to cover more ground
3
SUCCESS!
, Page 4 of 59
D.Maintain situational awareness to recognize changes in fire behavior - CORRECT
ANSWER✔✔D.Maintain situational awareness to recognize changes in fire behavior
Question: In which type of fire attack is water applied directly onto burning fuels until the fire
is extinguished?
A.Gas cooling
B.Direct attack
C.Indirect attack
D.Combination attack - CORRECT ANSWER✔✔B.Direct attack
Question: Which type of fire attack is made through a window or other opening, directing the
stream toward the ceiling to cool the room?
A.Gas cooling
B.Direct attack
C.Indirect attack
D.Combination attack - CORRECT ANSWER✔✔C.Indirect attack
4
SUCCESS!
FF2 FINAL EXAM NEWEST VERSION WITH
COMPLETE QUESTIONS AND CORRECT ANSWERS
JUST RELEASED THIS YEAR
Question: When using an in-line eductor, which of the following might cause foam
concentrations to be too lean?
A.Solid agent stick too cold to dissolve effectively.
B.Air compressor filter clogged, dirty, or water-soaked
C.Too little hose between eductor and discharge nozzle
D.Foam concentrate inlet too far above surface of foam concentrate - CORRECT
ANSWER✔✔D.Foam concentrate inlet too far above surface of foam concentrate
Question: Which of the following foam generators produces foam by pumping foam solution
through the nozzle in a fine spray?
A.Fog nozzle
B.Air-aspirating type nozzle
C.Water-aspirating type nozzle
1
SUCCESS!
,Page 2 of 59
D.Mechanical blower generator - CORRECT ANSWER✔✔C.Water-aspirating type nozzle
Question: Poor-quality foam may result from:
A.high pressure in the supply line.
B.a short hose lay on the discharge side.
C.air leaks at fittings causing a loss of suction.
D.the nozzle being located too far below the eductor. - CORRECT ANSWER✔✔C.air leaks at
fittings causing a loss of suction.
Question: A common reason for generating poor-quality foam is:
A.equipment is older than five years.
B.eductor and nozzle flow ratings match.
C.nozzle remains fully open during the process.
D.mixing different types of foam concentrate in the same tank. - CORRECT ANSWER✔✔D.mixing
different types of foam concentrate in the same tank.
2
SUCCESS!
,Page 3 of 59
Question: Which strategy is typically selected when property is not salvageable?
A.Direct
B.Indirect
C.Offensive
D.Defensive - CORRECT ANSWER✔✔D.Defensive
Question: Which strategic transition may be necessary when the situation rapidly changes?
A.Indirect to direct
B.Direct to indirect
C.Offensive to defensive
D.Defensive to offensive - CORRECT ANSWER✔✔C.Offensive to defensive
Question: Which of the following guidelines should be used when switching strategies?
A.Turn off radios in order to maintain radio silence
B.Abandon hoselines when strategy change is made
C.Split away from team in order to cover more ground
3
SUCCESS!
, Page 4 of 59
D.Maintain situational awareness to recognize changes in fire behavior - CORRECT
ANSWER✔✔D.Maintain situational awareness to recognize changes in fire behavior
Question: In which type of fire attack is water applied directly onto burning fuels until the fire
is extinguished?
A.Gas cooling
B.Direct attack
C.Indirect attack
D.Combination attack - CORRECT ANSWER✔✔B.Direct attack
Question: Which type of fire attack is made through a window or other opening, directing the
stream toward the ceiling to cool the room?
A.Gas cooling
B.Direct attack
C.Indirect attack
D.Combination attack - CORRECT ANSWER✔✔C.Indirect attack
4
SUCCESS!
