Advanced Rigging Test 2026 – Complete
Questions & A+ Expert Answers | Instant
Download
Save
Practice questions for this set
Learn 1 /7 Study with Learn
next longer load radius to be compensated for the boom length
Choose an answer
if the boom length falls between values listed on the load chart, the operator should
1
use the capacity rating for the
2 the operational quadrant between the left-or-right-side outriggers is
when a bundle of rebar is being lifted with two slings in a choker hitch, the sling eyes
3
should be threaded in the opposite direction to improve load stability
, the quadrant that is located between the rear outriggers or crawlers in the rearward
4
direction of travel is known as
Don't know?
Terms in this set (43)
the operational quadrant between over-the-side
the left-or-right-side outriggers is
cranes are typically built to be longer than they are wide
in a multiple-crane lift, the crane with closest to the loads center of gravity
the greatest net capacity must
always be
leverage is defined as the power applied to a lever to cause the load to
move
the quadrant that is located between over-the-rear
the rear outriggers or crawlers in the
rearward direction of travel is known
as
what dynamic occurs when a load is pendulum effect
hoisted from a point other than
directly over the load
the sudden release of a load that acceleration
causes a rapid change in effective
load weight is called
backward stability of a crane is high boom angles and inclines
affected by
Questions & A+ Expert Answers | Instant
Download
Save
Practice questions for this set
Learn 1 /7 Study with Learn
next longer load radius to be compensated for the boom length
Choose an answer
if the boom length falls between values listed on the load chart, the operator should
1
use the capacity rating for the
2 the operational quadrant between the left-or-right-side outriggers is
when a bundle of rebar is being lifted with two slings in a choker hitch, the sling eyes
3
should be threaded in the opposite direction to improve load stability
, the quadrant that is located between the rear outriggers or crawlers in the rearward
4
direction of travel is known as
Don't know?
Terms in this set (43)
the operational quadrant between over-the-side
the left-or-right-side outriggers is
cranes are typically built to be longer than they are wide
in a multiple-crane lift, the crane with closest to the loads center of gravity
the greatest net capacity must
always be
leverage is defined as the power applied to a lever to cause the load to
move
the quadrant that is located between over-the-rear
the rear outriggers or crawlers in the
rearward direction of travel is known
as
what dynamic occurs when a load is pendulum effect
hoisted from a point other than
directly over the load
the sudden release of a load that acceleration
causes a rapid change in effective
load weight is called
backward stability of a crane is high boom angles and inclines
affected by
