Best Grades | Must Pass | Latest Update | Correct Answers | 2026/ 2027
NEIEP 800 final review Questions and
Correct Answers | Latest Update
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50 square
inches. What is the system pressure?
162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-wellway
distance?
134' 11"
Electrolysis is caused by which of the following?
Stray current corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must be how many times the diameter of
the suspension ropes?
30
Wye-Delta starting is used for which of the following?
Reduced current starting
You need the area of the plunger to calculate the pressure of the hydraulic system. Your
plunger is 8 inches in diameter. What is it's area?
50.27 square inches
Which of the following provides mechanical interlocking of contactors?
, Best Grades | Must Pass | Latest Update | Correct Answers | 2026/ 2027
Interlock contacts
As the certified welder on the job you must weld two cylinder pieces. How must you join the
two pieces?
Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to prevent damage
to the packing?
Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound?
When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance from the first
floor finished floor height and the second floor finished floor height?
13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct measurement to align
the truss in the center of the wellway?
7' 6 1/2"
What is the function of the lower newel wheel on a moving walk with solid balustrades?
It acts as an idler
Which of the following will determine the leveling speed of an elevator?
NEIEP 800 final review Questions and
Correct Answers | Latest Update
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50 square
inches. What is the system pressure?
162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-wellway
distance?
134' 11"
Electrolysis is caused by which of the following?
Stray current corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must be how many times the diameter of
the suspension ropes?
30
Wye-Delta starting is used for which of the following?
Reduced current starting
You need the area of the plunger to calculate the pressure of the hydraulic system. Your
plunger is 8 inches in diameter. What is it's area?
50.27 square inches
Which of the following provides mechanical interlocking of contactors?
, Best Grades | Must Pass | Latest Update | Correct Answers | 2026/ 2027
Interlock contacts
As the certified welder on the job you must weld two cylinder pieces. How must you join the
two pieces?
Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to prevent damage
to the packing?
Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound?
When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance from the first
floor finished floor height and the second floor finished floor height?
13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct measurement to align
the truss in the center of the wellway?
7' 6 1/2"
What is the function of the lower newel wheel on a moving walk with solid balustrades?
It acts as an idler
Which of the following will determine the leveling speed of an elevator?
