Created By FutureBright
Alberta Boiler Operator (Second Class)
Certification Exam Questions And Correct
Answers (Verified Answers) Plus Rationales
Latest Q&A |Graded A+
1. What is the primary purpose of a boiler's safety valve?
a) To regulate steam pressure for process use
b) To prevent the boiler from overheating
c) To release excess pressure to prevent explosion
d) To control the water level in the boiler
The safety valve is designed to automatically release pressure if it
exceeds the maximum allowable limit, preventing catastrophic failure.
2. What type of boiler is most commonly used for high-pressure
steam generation?
a) Fire-tube boiler
b) Water-tube boiler
c) Electric boiler
d) Hot water boiler
Water-tube boilers can handle higher pressures and temperatures
because the water circulates in tubes heated externally by the fire.
3. Which instrument measures the water level in a boiler?
a) Pressure gauge
b) Thermocouple
, Created By FutureBright
c) Sight glass
d) Flow meter
A sight glass provides a visual indication of the water level inside the
boiler.
4. What is the main reason for treating boiler feedwater?
a) To increase efficiency
b) To reduce fuel consumption
c) To prevent scale and corrosion
d) To raise steam pressure
Untreated water can cause scaling and corrosion, which reduces
efficiency and can damage the boiler.
5. What is the primary function of a boiler economizer?
a) To increase steam pressure
b) To recover heat from flue gases
c) To feed water into the boiler
d) To remove impurities from water
An economizer captures residual heat from flue gases and uses it to
preheat the feedwater, improving efficiency.
6. What is the typical range for boiler water pH to prevent corrosion?
a) 4.0–5.0
b) 5.0–6.0
c) 10.5–11.5
d) 7.0–8.0
Boiler water is kept alkaline to prevent corrosion of metal surfaces.
, Created By FutureBright
7. What is carryover in a boiler?
a) Water that enters the superheater
b) Water droplets entrained in steam
c) Steam leaking from the safety valve
d) Excess feedwater
Carryover occurs when water is carried into the steam, which can cause
damage to turbines and other equipment.
8. Which of the following is a symptom of foaming in a boiler?
a) High fuel consumption
b) Sudden water level rise in the gauge glass
c) Low steam pressure
d) Slow start-up
Foaming creates bubbles in the water, causing the water level to appear
higher and potentially causing carryover.
9. The purpose of a boiler blowdown is to:
a) Increase steam production
b) Reduce fuel usage
c) Remove sludge and impurities from the water
d) Lower the water temperature
Blowdown removes concentrated impurities, preventing scale formation
and maintaining water quality.
10. Which fuel has the highest calorific value per unit?
a) Wood
b) Oil
c) Natural gas
d) Coal
Alberta Boiler Operator (Second Class)
Certification Exam Questions And Correct
Answers (Verified Answers) Plus Rationales
Latest Q&A |Graded A+
1. What is the primary purpose of a boiler's safety valve?
a) To regulate steam pressure for process use
b) To prevent the boiler from overheating
c) To release excess pressure to prevent explosion
d) To control the water level in the boiler
The safety valve is designed to automatically release pressure if it
exceeds the maximum allowable limit, preventing catastrophic failure.
2. What type of boiler is most commonly used for high-pressure
steam generation?
a) Fire-tube boiler
b) Water-tube boiler
c) Electric boiler
d) Hot water boiler
Water-tube boilers can handle higher pressures and temperatures
because the water circulates in tubes heated externally by the fire.
3. Which instrument measures the water level in a boiler?
a) Pressure gauge
b) Thermocouple
, Created By FutureBright
c) Sight glass
d) Flow meter
A sight glass provides a visual indication of the water level inside the
boiler.
4. What is the main reason for treating boiler feedwater?
a) To increase efficiency
b) To reduce fuel consumption
c) To prevent scale and corrosion
d) To raise steam pressure
Untreated water can cause scaling and corrosion, which reduces
efficiency and can damage the boiler.
5. What is the primary function of a boiler economizer?
a) To increase steam pressure
b) To recover heat from flue gases
c) To feed water into the boiler
d) To remove impurities from water
An economizer captures residual heat from flue gases and uses it to
preheat the feedwater, improving efficiency.
6. What is the typical range for boiler water pH to prevent corrosion?
a) 4.0–5.0
b) 5.0–6.0
c) 10.5–11.5
d) 7.0–8.0
Boiler water is kept alkaline to prevent corrosion of metal surfaces.
, Created By FutureBright
7. What is carryover in a boiler?
a) Water that enters the superheater
b) Water droplets entrained in steam
c) Steam leaking from the safety valve
d) Excess feedwater
Carryover occurs when water is carried into the steam, which can cause
damage to turbines and other equipment.
8. Which of the following is a symptom of foaming in a boiler?
a) High fuel consumption
b) Sudden water level rise in the gauge glass
c) Low steam pressure
d) Slow start-up
Foaming creates bubbles in the water, causing the water level to appear
higher and potentially causing carryover.
9. The purpose of a boiler blowdown is to:
a) Increase steam production
b) Reduce fuel usage
c) Remove sludge and impurities from the water
d) Lower the water temperature
Blowdown removes concentrated impurities, preventing scale formation
and maintaining water quality.
10. Which fuel has the highest calorific value per unit?
a) Wood
b) Oil
c) Natural gas
d) Coal
