CDL Combination Vehicle Practice Test Exam (2026) – Actual Exam Questions & Verified Answers | 40 Q&A | A+ Graded

Page 1 of 13


CDL - COMBINATION VEHICLE PRACTICE TEST
EXAM NEWEST 2026 ACTUAL EXAM QUESTIONS
AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) ALL ANSWERED {40 Q & A} ALREADY
GRADED A+ | BRAND NEW! | 100% GUARANTEED
PASS




When should you use the hand valve to park a combination
vehicle?
1. To park at loading docks
2. To park on a grade
3. never - ✔✔✔ Correct Answer > Never


When checking the trailer emergency brakes, make sure that the
tractor protection control valve is placed in the _______ position.
1. normal
2. emergency
3. neutral - ✔✔✔ Correct Answer > emergency


The front trailer supports are up, and the trailer is resting on the
tractor. Make sure that

, Page 2 of 13


1. there is enough clearance between the upper and lower fifth
wheel
2. there is enough clearance between the tractor frame and the
landing gear
3. the safety latch is in the unlocked position - ✔✔✔ Correct Answer >
there is enough clearance between the tractor frame and the
landing gear


The trailer hand valve works the trailer brakes. Which of these
statements is true?
1. the foot brake sends air to all the brakes on the vehicle (
including the trailer(s))
2. The trailer hand valve should be used only to test the trailer
brakes
3. all the above - ✔✔✔ Correct Answer > all the above


Where should the tractor be when you inspect the landing gear
after uncoupling the trailer?
1. With the fifth wheel directly beneath the kingpin
2. completely cleared from the trailer
3. with the tractor frame under the trailer - ✔✔✔ Correct Answer >
with the tractor frame under the trailer