APWA CPII Practice Exam Questions And “100%
Verified Answers With Verified Solutions Grade A+.
📘 APWA CPII Overview (Exam Structure & Topics)
• Format: 150 multiple-choice questions, 3.5 hours. (American Public Works
Association)
• Core Domains Assessed: (American Public Works Association)
1. Testing, Measurement, and Inspection
▪ Underground construction
▪ At-grade (roadways, sidewalks)
▪ Structural construction
▪ General construction fundamentals
2. Project Planning & Management
▪ Planning
▪ Management
3. Project Compliance & Documentation
▪ Compliance
▪ Documentation
• The exam assumes practical field experience with infrastructure inspection and
compliance assessment. (American Public Works Association)
1. Which three are standard symbols and classifications used by ASTM to identify
soils?
A) Gravel (G), Sand (S), Clay (C)
B) Sand (S), Silt (M), Rock (R)
C) Sand (S), Rock (R), Clay (C)
D) Gravel (G), Sand (S), Rock (R)
Answer: D — These are standard ASTM symbols used in soil classification.
2. What is the purpose of a compaction test during soil work?
Answer: To verify the soil or base material meets specified density requirements to
prevent settlement and provide proper support.
3. In concrete testing, the concrete slump test is used to measure:
A) Strength after curing
B) Workability/consistency of fresh concrete
C) Aggregate size
D) Air content
Answer: B — Slump test measures workability.
4. t what oxygen concentration is an atmosphere considered oxygen-deficient?
A) >18.5%
B) >21%
, C) <20.2%
D) <19.5%
Answer: D — <19.5% is generally accepted as oxygen-deficient.
5. Which is true about a permit-required confined space?
A) Contains or has potential to contain a hazardous atmosphere
B) Does not contain hazards
C) Always has walls that converge outward
D) Always has walls that diverge inward
Answer: A — Key characteristic of a permit-required confined space.
6. A “punch list” describes:
A) The schedule of inspections
B) A list of defects that must be corrected before final acceptance
C) Employee evaluation checklist
D) Equipment staging plan
Answer: B — A punch list identifies items that don’t meet specs.
7. When a contractor deviates from project specifications, the first appropriate
action is to:
A) Stop work immediately
B) Document the issue and discuss with the contractor’s supervisor
C) Ignore the issue
D) Report directly to city council
Answer: B — The correct inspector response is to document and communicate.
8. Which distress type is characterized by interconnected cracks forming blocks?
A) Alligator cracking
B) Block cracking
C) Longitudinal cracking
D) Transverse cracking
Answer: B — Block cracking.
9. Which of the following best describes the purpose of a tack coat in asphalt
paving?
A) Seal cracks
B) Provide bonding between pavement layers
C) Improve drainage
D) Increase friction
Answer: B — Tack coat enhances layer bonding.
10. Typical percentage of asphalt in hot-mix asphalt (HMA):
A) 2–4%
B) 4–6%
C) 5–7%
D) 8–10%
Answer: C — Common range for asphalt content.
Verified Answers With Verified Solutions Grade A+.
📘 APWA CPII Overview (Exam Structure & Topics)
• Format: 150 multiple-choice questions, 3.5 hours. (American Public Works
Association)
• Core Domains Assessed: (American Public Works Association)
1. Testing, Measurement, and Inspection
▪ Underground construction
▪ At-grade (roadways, sidewalks)
▪ Structural construction
▪ General construction fundamentals
2. Project Planning & Management
▪ Planning
▪ Management
3. Project Compliance & Documentation
▪ Compliance
▪ Documentation
• The exam assumes practical field experience with infrastructure inspection and
compliance assessment. (American Public Works Association)
1. Which three are standard symbols and classifications used by ASTM to identify
soils?
A) Gravel (G), Sand (S), Clay (C)
B) Sand (S), Silt (M), Rock (R)
C) Sand (S), Rock (R), Clay (C)
D) Gravel (G), Sand (S), Rock (R)
Answer: D — These are standard ASTM symbols used in soil classification.
2. What is the purpose of a compaction test during soil work?
Answer: To verify the soil or base material meets specified density requirements to
prevent settlement and provide proper support.
3. In concrete testing, the concrete slump test is used to measure:
A) Strength after curing
B) Workability/consistency of fresh concrete
C) Aggregate size
D) Air content
Answer: B — Slump test measures workability.
4. t what oxygen concentration is an atmosphere considered oxygen-deficient?
A) >18.5%
B) >21%
, C) <20.2%
D) <19.5%
Answer: D — <19.5% is generally accepted as oxygen-deficient.
5. Which is true about a permit-required confined space?
A) Contains or has potential to contain a hazardous atmosphere
B) Does not contain hazards
C) Always has walls that converge outward
D) Always has walls that diverge inward
Answer: A — Key characteristic of a permit-required confined space.
6. A “punch list” describes:
A) The schedule of inspections
B) A list of defects that must be corrected before final acceptance
C) Employee evaluation checklist
D) Equipment staging plan
Answer: B — A punch list identifies items that don’t meet specs.
7. When a contractor deviates from project specifications, the first appropriate
action is to:
A) Stop work immediately
B) Document the issue and discuss with the contractor’s supervisor
C) Ignore the issue
D) Report directly to city council
Answer: B — The correct inspector response is to document and communicate.
8. Which distress type is characterized by interconnected cracks forming blocks?
A) Alligator cracking
B) Block cracking
C) Longitudinal cracking
D) Transverse cracking
Answer: B — Block cracking.
9. Which of the following best describes the purpose of a tack coat in asphalt
paving?
A) Seal cracks
B) Provide bonding between pavement layers
C) Improve drainage
D) Increase friction
Answer: B — Tack coat enhances layer bonding.
10. Typical percentage of asphalt in hot-mix asphalt (HMA):
A) 2–4%
B) 4–6%
C) 5–7%
D) 8–10%
Answer: C — Common range for asphalt content.
