Asbestos Inspector Certification Exam
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of an asbestos inspection is to
A. Determine the age of a building
B. Identify and assess asbestos-containing materials
C. Estimate renovation costs
D. Approve demolition permits
Answer: B
Inspections focus on locating ACM and evaluating its condition and
risk.
2. Asbestos-containing material (ACM) is defined as material
containing more than
A. 0.1% asbestos
B. 0.5% asbestos
C. 1.0% asbestos
D. 5.0% asbestos
Answer: C
Regulations define ACM as greater than 1% asbestos by weight.
3. Which federal law primarily governs asbestos inspections in
schools?
A. Clean Water Act
B. AHERA
C. OSHA Act
, D. RCRA
Answer: B
AHERA specifically addresses asbestos in school buildings.
4. Friable asbestos material is best described as material that
A. Is sealed and intact
B. Can be crumbled by hand pressure when dry
C. Is always sprayed-on
D. Contains less than 1% asbestos
Answer: B
Friability indicates the potential for fiber release.
5. Which material is MOST likely to be friable?
A. Vinyl floor tile
B. Transite panels
C. Pipe insulation
D. Roofing shingles
Answer: C
Thermal system insulation is commonly friable.
6. A building inspection performed before renovation is commonly
called a
A. Management survey
B. Operations survey
C. Pre-renovation survey
D. Clearance survey
Answer: C
Renovation surveys identify ACM that may be disturbed.
7. Homogeneous areas are defined as areas that
A. Have the same owner
, B. Were built in the same year
C. Contain similar materials with similar appearance
D. Are all friable
Answer: C
Homogeneity helps determine representative sampling.
8. Which document outlines inspection findings and
recommendations?
A. Chain-of-custody form
B. Inspection report
C. Air monitoring log
D. Abatement plan
Answer: B
The inspection report communicates results to the client.
9. Which agency regulates workplace asbestos exposure standards?
A. EPA
B. NIOSH
C. OSHA
D. DOT
Answer: C
OSHA sets permissible exposure limits for workers.
10. Thermal system insulation includes materials found on
A. Walls and ceilings
B. Floors
C. Boilers and pipes
D. Windows
Answer: C
TSI insulates heat-producing systems.
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of an asbestos inspection is to
A. Determine the age of a building
B. Identify and assess asbestos-containing materials
C. Estimate renovation costs
D. Approve demolition permits
Answer: B
Inspections focus on locating ACM and evaluating its condition and
risk.
2. Asbestos-containing material (ACM) is defined as material
containing more than
A. 0.1% asbestos
B. 0.5% asbestos
C. 1.0% asbestos
D. 5.0% asbestos
Answer: C
Regulations define ACM as greater than 1% asbestos by weight.
3. Which federal law primarily governs asbestos inspections in
schools?
A. Clean Water Act
B. AHERA
C. OSHA Act
, D. RCRA
Answer: B
AHERA specifically addresses asbestos in school buildings.
4. Friable asbestos material is best described as material that
A. Is sealed and intact
B. Can be crumbled by hand pressure when dry
C. Is always sprayed-on
D. Contains less than 1% asbestos
Answer: B
Friability indicates the potential for fiber release.
5. Which material is MOST likely to be friable?
A. Vinyl floor tile
B. Transite panels
C. Pipe insulation
D. Roofing shingles
Answer: C
Thermal system insulation is commonly friable.
6. A building inspection performed before renovation is commonly
called a
A. Management survey
B. Operations survey
C. Pre-renovation survey
D. Clearance survey
Answer: C
Renovation surveys identify ACM that may be disturbed.
7. Homogeneous areas are defined as areas that
A. Have the same owner
, B. Were built in the same year
C. Contain similar materials with similar appearance
D. Are all friable
Answer: C
Homogeneity helps determine representative sampling.
8. Which document outlines inspection findings and
recommendations?
A. Chain-of-custody form
B. Inspection report
C. Air monitoring log
D. Abatement plan
Answer: B
The inspection report communicates results to the client.
9. Which agency regulates workplace asbestos exposure standards?
A. EPA
B. NIOSH
C. OSHA
D. DOT
Answer: C
OSHA sets permissible exposure limits for workers.
10. Thermal system insulation includes materials found on
A. Walls and ceilings
B. Floors
C. Boilers and pipes
D. Windows
Answer: C
TSI insulates heat-producing systems.
