Page 1 of 262
ATC (Air Traffic Control) Basics Final EXAM
COMPLETE QUESTIONS AND CORRECT VERIFIED
ANS WERS LATEST UPDATE JUST RELEASED THIS
YEAR
A lighted water airport would have what color beacon?
a. Flashing white, green and yellow
b. Flashing white and yellow
c. Flashing white and green
d. Two quick white flashes followed by a green flash
b. Flashing white and yellow
What is the Beech Aircraft with a V-tail?
a. Baron, BE35
b. Bonanza, BE36
c. Beechjet, BE40
d. Bonanza, BE35
d. Bonanza, BE35
Which light system provides visual descent guidance during runway approaches?
a. In-runway lighting system
1
SUCCESS!
,Page 2 of 262
b. Approach light system
c. Visual glideslope indicators
c. Visual glideslope indicators
What in-pavement lighting system alternates between yellow and green lights?
a. Taxiway centerline lights
b. Runway entrance lights (RELs)
c. Threshold lights
d. Lead-on lights
d. Lead-on lights
Controllers must use good judgement when using what type of phraseology?
a. Standard
b. Non-standard
c. Unpublished
d. Plain
b. Non-standard
Which type of lighting consists of two rows of lights on each side of runway centerline lights?
a. Aim point lights
b. Runway edge lights
c. Touchdown zone lighting
d. Threshold lights
2
SUCCESS!
,Page 3 of 262
c. Touchdown zone lighting
Touchdown Zone Lighting (TDZL) and Runway Centerline Lights System (RCLS) are two types of
a. Runway End Identifier Lights
b. Taxiway lights
c. In-runway lights
d. Runway edge lights
c. In-runway lights
_______ consists of a pair of synchronized white flashing strobe lights located laterally on
each side of the runway.
a. Airport beacons
b. Taxiway lights
c. Runway edge lights
d. Runway End Identifier Lights (REIL)
d. Runway End Identifier Lights (REIL)
All of the following represent uses of a non-movement area EXCEPT:
a. Loading passengers
b. Landing
c. Maintenance
d. Parking
b. Landing
3
SUCCESS!
, Page 4 of 262
What is the designator for the Bell Ranger 206?
a. BR06
b. B206
c. BR206
d. B06
d. B06
At airports with an operating control tower, clearance is required to separate in all areas
EXCEPT
a. Runways
b. Taxiways
c. Non-movement areas
d. Heliport/helipad
c. Non-movement areas
The minimum vertical separation required for aircraft above FL600 is ____ feet.
a. 10,000
b. 5,000
c. 2,000
d. 1,000
b. 5,000
4
SUCCESS!
ATC (Air Traffic Control) Basics Final EXAM
COMPLETE QUESTIONS AND CORRECT VERIFIED
ANS WERS LATEST UPDATE JUST RELEASED THIS
YEAR
A lighted water airport would have what color beacon?
a. Flashing white, green and yellow
b. Flashing white and yellow
c. Flashing white and green
d. Two quick white flashes followed by a green flash
b. Flashing white and yellow
What is the Beech Aircraft with a V-tail?
a. Baron, BE35
b. Bonanza, BE36
c. Beechjet, BE40
d. Bonanza, BE35
d. Bonanza, BE35
Which light system provides visual descent guidance during runway approaches?
a. In-runway lighting system
1
SUCCESS!
,Page 2 of 262
b. Approach light system
c. Visual glideslope indicators
c. Visual glideslope indicators
What in-pavement lighting system alternates between yellow and green lights?
a. Taxiway centerline lights
b. Runway entrance lights (RELs)
c. Threshold lights
d. Lead-on lights
d. Lead-on lights
Controllers must use good judgement when using what type of phraseology?
a. Standard
b. Non-standard
c. Unpublished
d. Plain
b. Non-standard
Which type of lighting consists of two rows of lights on each side of runway centerline lights?
a. Aim point lights
b. Runway edge lights
c. Touchdown zone lighting
d. Threshold lights
2
SUCCESS!
,Page 3 of 262
c. Touchdown zone lighting
Touchdown Zone Lighting (TDZL) and Runway Centerline Lights System (RCLS) are two types of
a. Runway End Identifier Lights
b. Taxiway lights
c. In-runway lights
d. Runway edge lights
c. In-runway lights
_______ consists of a pair of synchronized white flashing strobe lights located laterally on
each side of the runway.
a. Airport beacons
b. Taxiway lights
c. Runway edge lights
d. Runway End Identifier Lights (REIL)
d. Runway End Identifier Lights (REIL)
All of the following represent uses of a non-movement area EXCEPT:
a. Loading passengers
b. Landing
c. Maintenance
d. Parking
b. Landing
3
SUCCESS!
, Page 4 of 262
What is the designator for the Bell Ranger 206?
a. BR06
b. B206
c. BR206
d. B06
d. B06
At airports with an operating control tower, clearance is required to separate in all areas
EXCEPT
a. Runways
b. Taxiways
c. Non-movement areas
d. Heliport/helipad
c. Non-movement areas
The minimum vertical separation required for aircraft above FL600 is ____ feet.
a. 10,000
b. 5,000
c. 2,000
d. 1,000
b. 5,000
4
SUCCESS!