RIGGING PRACTICES COURSE 78 QUESTIONS AND
ANSWERS 2026/2027 || RIGGING FUNDAMENTALS, SAFE
LIFTING PRACTICES & LOAD CONTROL || GRADED A+
76 VERIFIED QUESTIONS & ACCURATE ANSWERS ||
A load chart range diagram can best be used to help identify: - CORRECT
ANSWER - net capacity
for mobile crane working at maximum radius, exceeding what percentage of the
cranes capacity requires the radius to be verified? - CORRECT ANSWER -
80%
the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is? -
CORRECT ANSWER - 3/4 in
when tying knots in synthetic rope lashing, the rated load is increased by 50% ? -
CORRECT ANSWER - false
the size of shackle that can be used in the eye of a wire rope sling must be
________ the wire rope size? - CORRECT ANSWER - equal to or greater
than
a shackle must be marked with the rated load, re-inspected due date, and the date
manufacture? - CORRECT ANSWER - false
, when working near energized power lines where the crane or load could cross the
absolute limit of approach, what additional requirements must the crane team
follow? - CORRECT ANSWER - designated spotter must be stationed to
watch clearances
the load weight of a personnel lift must not exceed _____ of the hoists rated
capacity for the working radius ? - CORRECT ANSWER - (50%)
a manufacturer's certificate of proof test may satisfy the initial test requirements for
rigging equipment? - CORRECT ANSWER - false
which of the following operator actions will most likely cause a reduction in the
capacity of a mobile crane? - CORRECT ANSWER - booming down
an angular pull of 45 degrees is allowed on non shouldered type eye bolts? -
CORRECT ANSWER - false
two slings creating a 60 degree sling angle are used to lift a 4,000 pound item. the
appropriate rated load for each sling is 2,000 pounds. - CORRECT ANSWER -
false
when are loads allowed to be moved over personnel? - CORRECT ANSWER -
never
ANSWERS 2026/2027 || RIGGING FUNDAMENTALS, SAFE
LIFTING PRACTICES & LOAD CONTROL || GRADED A+
76 VERIFIED QUESTIONS & ACCURATE ANSWERS ||
A load chart range diagram can best be used to help identify: - CORRECT
ANSWER - net capacity
for mobile crane working at maximum radius, exceeding what percentage of the
cranes capacity requires the radius to be verified? - CORRECT ANSWER -
80%
the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is? -
CORRECT ANSWER - 3/4 in
when tying knots in synthetic rope lashing, the rated load is increased by 50% ? -
CORRECT ANSWER - false
the size of shackle that can be used in the eye of a wire rope sling must be
________ the wire rope size? - CORRECT ANSWER - equal to or greater
than
a shackle must be marked with the rated load, re-inspected due date, and the date
manufacture? - CORRECT ANSWER - false
, when working near energized power lines where the crane or load could cross the
absolute limit of approach, what additional requirements must the crane team
follow? - CORRECT ANSWER - designated spotter must be stationed to
watch clearances
the load weight of a personnel lift must not exceed _____ of the hoists rated
capacity for the working radius ? - CORRECT ANSWER - (50%)
a manufacturer's certificate of proof test may satisfy the initial test requirements for
rigging equipment? - CORRECT ANSWER - false
which of the following operator actions will most likely cause a reduction in the
capacity of a mobile crane? - CORRECT ANSWER - booming down
an angular pull of 45 degrees is allowed on non shouldered type eye bolts? -
CORRECT ANSWER - false
two slings creating a 60 degree sling angle are used to lift a 4,000 pound item. the
appropriate rated load for each sling is 2,000 pounds. - CORRECT ANSWER -
false
when are loads allowed to be moved over personnel? - CORRECT ANSWER -
never
