NET+ N10-008 COMPREHENSIVE TEST 2026
QUESTIONS WITH ANSWERS VERIFIED A+
◉ While installing Wi-Fi for a large amount of users, we want to
utilize and 802.11 Standard with the maximum amount of channels
in order to prioritize reducing interference. While researching which
standard we should utilize, we see if you different frequencies that
different 802.11 standards utilize. Which of the following
frequencies ranges should we utilize given the above requirement.
Answer: 5 GHz. — 23 non overlapping channels
◉ Which of the following would most likely be used to review
previous upgrades to a system. Answer: Change management
◉ Which of the following commands can be used to display the pass
that networking traffic takes to reach other networks. Answer: Show
route
◉ While using many unmanaged switches in your home you decided
to connect redundant cables between the switches in order to
increase redundancy. However, since this change was made you
started experiencing extreme amounts of latency. Which of the
following problems is most likely occurring?. Answer: A broadcast
storm —
, Having redundant connections between switches runs the risk of
allowing broadcast storms to propagate through your network. This
is especially true of unmanaged switches which would like many of
the basic security controls of manage switches, such as STP
◉ Which of the following best describes a network appliance that
warns of unapproved devices that are accessing the network.
Answer: IDS - intrusion detection system
◉ Which of the following technologies will allow many WAP's to
broadcast the same SSID across a multi story building while
providing continuous connectivity?. Answer: Extended service set —
ESSID allows users to seamlessly reconnect to a different access
point when they walk far enough away from their original access
point. This is great for a company with a large physical footprint that
wants one consistent wireless network
◉ Which transceiver type can support up to 40 Gbps?. Answer:
QSFP+
QSFP+ 10 Gbps per channel / 40 Gbps channels
◉ When a large amount of users are remotely accessing a
centralized VM hosting server, which of the following concerns are
,raised assuming the network can readily support this increase in
traffic. Answer: CPU usage and. Memory
VMs much like physical systems however do you have both CPU and
RAM requirements the more systems running on the VM host the
hire the requirements
◉ Client devices cannot enter network and the network
administrator determines the DHCP scope is exhausted the
administrator wants to avoid creating a new DH pool which of the
following in the administrator perform to resolve the issue. Answer:
Decrease the number of VLANs —
While we would generally increase the scope of the DHCP pool that
may cause other problems which is why we see this question states
we want to avoid increasing the scope by reducing the least time we
will cycle through IP at a quicker rate then we otherwise would
allowing us to reuse IP address is much more quickly
◉ What type of cable would likely be used to connect to the WAN
Port on a cable modem. Answer: Coaxial
◉ Which of the following would need to be configured to ensure a
device with a specific Mac addresses always assigned the same IP
address from DHCP. Answer: Reservation —
, While a static assignment would ensure a device would have a
consistent IP address the question states that it Has to be from DHCP
making a Mac reservation our best answer
◉ What port enables telnet access to a device. Answer: 23
Telnet
◉ What should be reviewed on a switch in order to review physical
network addresses. Answer: MAC table—
Mac addresses are physical network addresses
◉ You were troubleshooting a network switch that seem to have
stopped responding to request when the login level was set to
debugging which of the following should be checked to begin
troubleshooting the switch. Answer: CPU utilization —
If setting logging to debugging the highest level/lease severe level of
logging you end up asking the device for all logs which is
information on an incredible amount of traffic
QUESTIONS WITH ANSWERS VERIFIED A+
◉ While installing Wi-Fi for a large amount of users, we want to
utilize and 802.11 Standard with the maximum amount of channels
in order to prioritize reducing interference. While researching which
standard we should utilize, we see if you different frequencies that
different 802.11 standards utilize. Which of the following
frequencies ranges should we utilize given the above requirement.
Answer: 5 GHz. — 23 non overlapping channels
◉ Which of the following would most likely be used to review
previous upgrades to a system. Answer: Change management
◉ Which of the following commands can be used to display the pass
that networking traffic takes to reach other networks. Answer: Show
route
◉ While using many unmanaged switches in your home you decided
to connect redundant cables between the switches in order to
increase redundancy. However, since this change was made you
started experiencing extreme amounts of latency. Which of the
following problems is most likely occurring?. Answer: A broadcast
storm —
, Having redundant connections between switches runs the risk of
allowing broadcast storms to propagate through your network. This
is especially true of unmanaged switches which would like many of
the basic security controls of manage switches, such as STP
◉ Which of the following best describes a network appliance that
warns of unapproved devices that are accessing the network.
Answer: IDS - intrusion detection system
◉ Which of the following technologies will allow many WAP's to
broadcast the same SSID across a multi story building while
providing continuous connectivity?. Answer: Extended service set —
ESSID allows users to seamlessly reconnect to a different access
point when they walk far enough away from their original access
point. This is great for a company with a large physical footprint that
wants one consistent wireless network
◉ Which transceiver type can support up to 40 Gbps?. Answer:
QSFP+
QSFP+ 10 Gbps per channel / 40 Gbps channels
◉ When a large amount of users are remotely accessing a
centralized VM hosting server, which of the following concerns are
,raised assuming the network can readily support this increase in
traffic. Answer: CPU usage and. Memory
VMs much like physical systems however do you have both CPU and
RAM requirements the more systems running on the VM host the
hire the requirements
◉ Client devices cannot enter network and the network
administrator determines the DHCP scope is exhausted the
administrator wants to avoid creating a new DH pool which of the
following in the administrator perform to resolve the issue. Answer:
Decrease the number of VLANs —
While we would generally increase the scope of the DHCP pool that
may cause other problems which is why we see this question states
we want to avoid increasing the scope by reducing the least time we
will cycle through IP at a quicker rate then we otherwise would
allowing us to reuse IP address is much more quickly
◉ What type of cable would likely be used to connect to the WAN
Port on a cable modem. Answer: Coaxial
◉ Which of the following would need to be configured to ensure a
device with a specific Mac addresses always assigned the same IP
address from DHCP. Answer: Reservation —
, While a static assignment would ensure a device would have a
consistent IP address the question states that it Has to be from DHCP
making a Mac reservation our best answer
◉ What port enables telnet access to a device. Answer: 23
Telnet
◉ What should be reviewed on a switch in order to review physical
network addresses. Answer: MAC table—
Mac addresses are physical network addresses
◉ You were troubleshooting a network switch that seem to have
stopped responding to request when the login level was set to
debugging which of the following should be checked to begin
troubleshooting the switch. Answer: CPU utilization —
If setting logging to debugging the highest level/lease severe level of
logging you end up asking the device for all logs which is
information on an incredible amount of traffic
