2
ASE BRAKES Exam 4 with verified detailed answers
|| || || || || || ||
Four channel ABS sensors will have how many ABS wheel speed sensors?
|| || || || || || || || || || || ||
A. Two ||
B. Four
||
C. Six||
D. Eight - ✔✔B
|| || ||
The metering valve:
|| ||
A. Limits front brake application until the rear brakes apply.
|| || || || || || || || ||
B. Limits rear brake application until the front brakes apply.
|| || || || || || || || ||
C. Limits front brake application based on vehicle height.
|| || || || || || || ||
D. Limits rear brake application based on vehicle height. - ✔✔A
|| || || || || || || || || ||
A wheel cylinder has been honed. It should be cleaned with:
|| || || || || || || || || ||
A. Alcohol.
||
B. Mineral spirits.
|| ||
C. Penetrating solvent.
|| ||
D. Rust preventive. - ✔✔A
|| || || ||
A vehicle is equipped with a disc/drum brake system. When the customer pulls the parking
|| || || || || || || || || || || || || || ||
brake lever the lever travels it's full range of motion, but the parking brake does not apply.
|| || || || || || || || || || || || || || || || ||
Technician A says the disc brakes could be out of adjustment. Technician B says the drum
|| || || || || || || || || || || || || || || ||
brakes could be out of adjustment. Who is correct?
|| || || || || || || ||
A. A ||
B. B ||
, 2
C. Both A and B
|| || || ||
D. Neither A nor B - ✔✔B
|| || || || || ||
A height sensing proportioning valve would be located on:
|| || || || || || || ||
A. The left front.
|| || ||
B. The right front.
|| || ||
C. The rear in the center.
|| || || || ||
D. Only on all wheel drive vehicles. - ✔✔C
|| || || || || || || ||
The customer feels a rapid pedal pulsation under normal braking conditions. This could be
|| || || || || || || || || || || || || ||
caused by all of the following EXCEPT:
|| || || || || ||
A. Different size tires.
|| || ||
B. A damaged reluctor wheel.
|| || || ||
C. Excessive reluctor to sensor gap.
|| || || || ||
D. Open circuit to the speed sensor. - ✔✔D
|| || || || || || || ||
The technician measures the front rotors; the results are listed below:
|| || || || || || || || || ||
Minimum Rotor Thickness, Specifications: || || || ||
.898" (22.80mm) ||
Actual Rotor Thickness, Left: .889" (22.58mm)
|| || || || ||
Actual Rotor Thickness, Right: .809" (25.12mm)
|| || || || ||
Which of the following should be done?
|| || || || || ||
A. Replace the left rotor.
|| || || ||
B. Replace both rotors.
|| || ||
ASE BRAKES Exam 4 with verified detailed answers
|| || || || || || ||
Four channel ABS sensors will have how many ABS wheel speed sensors?
|| || || || || || || || || || || ||
A. Two ||
B. Four
||
C. Six||
D. Eight - ✔✔B
|| || ||
The metering valve:
|| ||
A. Limits front brake application until the rear brakes apply.
|| || || || || || || || ||
B. Limits rear brake application until the front brakes apply.
|| || || || || || || || ||
C. Limits front brake application based on vehicle height.
|| || || || || || || ||
D. Limits rear brake application based on vehicle height. - ✔✔A
|| || || || || || || || || ||
A wheel cylinder has been honed. It should be cleaned with:
|| || || || || || || || || ||
A. Alcohol.
||
B. Mineral spirits.
|| ||
C. Penetrating solvent.
|| ||
D. Rust preventive. - ✔✔A
|| || || ||
A vehicle is equipped with a disc/drum brake system. When the customer pulls the parking
|| || || || || || || || || || || || || || ||
brake lever the lever travels it's full range of motion, but the parking brake does not apply.
|| || || || || || || || || || || || || || || || ||
Technician A says the disc brakes could be out of adjustment. Technician B says the drum
|| || || || || || || || || || || || || || || ||
brakes could be out of adjustment. Who is correct?
|| || || || || || || ||
A. A ||
B. B ||
, 2
C. Both A and B
|| || || ||
D. Neither A nor B - ✔✔B
|| || || || || ||
A height sensing proportioning valve would be located on:
|| || || || || || || ||
A. The left front.
|| || ||
B. The right front.
|| || ||
C. The rear in the center.
|| || || || ||
D. Only on all wheel drive vehicles. - ✔✔C
|| || || || || || || ||
The customer feels a rapid pedal pulsation under normal braking conditions. This could be
|| || || || || || || || || || || || || ||
caused by all of the following EXCEPT:
|| || || || || ||
A. Different size tires.
|| || ||
B. A damaged reluctor wheel.
|| || || ||
C. Excessive reluctor to sensor gap.
|| || || || ||
D. Open circuit to the speed sensor. - ✔✔D
|| || || || || || || ||
The technician measures the front rotors; the results are listed below:
|| || || || || || || || || ||
Minimum Rotor Thickness, Specifications: || || || ||
.898" (22.80mm) ||
Actual Rotor Thickness, Left: .889" (22.58mm)
|| || || || ||
Actual Rotor Thickness, Right: .809" (25.12mm)
|| || || || ||
Which of the following should be done?
|| || || || || ||
A. Replace the left rotor.
|| || || ||
B. Replace both rotors.
|| || ||
