2
C of Q 310T Prep Exam questions with precise solutions
|| || || || || || || || ||
1. Which of the following clutch components is a driven member?!
|| || || || || || || || || ||
a. clutch cover
|| ||
b. clutch friction disc
|| || ||
c. intermediate plate
|| ||
d. pressure plate - ✔✔b. clutch friction disc
|| || || || || || ||
2. Which of the following is not a part of the clutch cover assembly?!
|| || || || || || || || || || || || ||
a. pressure spring
|| ||
b. release lever
|| ||
c. pressure plate
|| ||
d. adapter ring - ✔✔d. adapter ring
|| || || || || ||
3. Which of the following clutch components is splined to the input shaft of the
|| || || || || || || || || || || || || || ||
transmission?!
a. clutch friction disc
|| || ||
b. pressure plate
|| ||
c. release bearing
|| ||
d. flywheel - ✔✔a. clutch friction disc
|| || || || || ||
4. What is the function of a current clutch brake used in a heavy-duty drivetrain?!
|| || || || || || || || || || || || || ||
a. minimize gear clash during a neutral to first gear shift
|| || || || || || || || || ||
b. minimize gear clash during downshifts to all ratios
|| || || || || || || ||
c. minimize gear clash during upshifts to all ratios
|| || || || || || || ||
,2
d. none of the above - ✔✔a. minimize gear clash during a neutral to first gear shift
|| || || || || || || || || || || || || || || ||
5. Which of the following driving procedures will result in clutch or driveline damage?!
|| || || || || || || || || || || || ||
a. driving with a foot on the clutch pedal
|| || || || || || || ||
b. using the clutch as a brake to hold the truck on a hill and incline
|| || || || || || || || || || || || || || ||
c. coasting downhill with the transmission in gear and the clutch disengaged
|| || || || || || || || || || ||
d. all of the above - ✔✔d. all of the above
|| || || || || || || || || ||
6. Which of the following could be a cause of poor clutch release?!
|| || || || || || || || || || || ||
a. damaged drive pins
|| || ||
b. worn clutch linkage
|| || ||
c. worn release bearing
|| || ||
d. all of the above - ✔✔d. all of the above
|| || || || || || || || || ||
7. How often should a clutch be inspected and lubricated?!
|| || || || || || || || ||
a. every month
|| ||
b. every 6,000 to 10,000 miles
|| || || || ||
c. any time the chassis is lubricated
|| || || || || ||
d. all of the above - ✔✔d. all of the above
|| || || || || || || || || ||
8. When adjusting clutch linkage, Technician A says that pedal free travel should be about
|| || || || || || || || || || || || || || ||
1½ to 2|| ||
inches. Technician B says that free travel should be more than ½ inch measured at the
|| || || || || || || || || || || || || || || ||
release
forks. Who is correct?!
|| || ||
a. Technician A only
|| || ||
,2
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔a. Technician A only
|| || || || || || || || ||
9. When servicing clutches, Technician A always wears an OSHA-approved particulate
|| || || || || || || || || || ||
mask.
Technician B uses compressed air to clean off clutch components before removing a clutch
|| || || || || || || || || || || || ||
pack. Who is correct?!
|| || ||
a. Technician A only
|| || ||
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔a. Technician A only
|| || || || || || || || ||
10. In the procedure required to perform a clutch replacement on a truck, which of the
|| || || || || || || || || || || || || || || ||
following
steps should be performed first?!
|| || || ||
a. Unbolt the clutch from the flywheel.
|| || || || || ||
b. Remove the clutch brake.
|| || || ||
c. Install a clutch alignment tool through the release bearing.
|| || || || || || || || ||
d. Unbolt the transmission bell housing from the flywheel. - ✔✔a. Unbolt the clutch from
|| || || || || || || || || || || || || || ||
the flywheel
||
11. On which of the following types of flywheels would the center intermediate plate be
|| || || || || || || || || || || || || || ||
driven by ||
drive pins?! ||
a. flat flywheel
|| ||
b. pot flywheel
|| ||
, 2
c. torque converter
|| ||
d. all of the above - ✔✔b. pot flywheel
|| || || || || || || ||
12. Failure analysis determines that the facing of a clutch disc has burst. Technician A says
|| || || || || || || || || || || || || || || ||
that the ||
cause is the driver using the clutch as a brake. Technician B says that the problem might be
|| || || || || || || || || || || || || || || || || ||
the
driver coasting downhill with the transmission in gear and the clutch disengaged. Who is
|| || || || || || || || || || || || || ||
correct?!
a. Technician A only
|| || ||
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔b. Technician B only
|| || || || || || || || ||
13. When installing a 14-inch clutch, Technician A installs new drive pins in the flywheel.
|| || || || || || || || || || || || || || ||
Technician B ||
files the drive pin slots to ensure that proper clearances are met. Who is correct?!
|| || || || || || || || || || || || || ||
a. Technician A only
|| || ||
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔a. Technician A only
|| || || || || || || || ||
14. When regarding the operation of a typical 15½- inch clutch, which of the following
|| || || || || || || || || || || || || || ||
components
constantly rotates at engine rpm?! || || || ||
a. rear clutch disc
|| || ||
b. front clutch disc
|| || ||
C of Q 310T Prep Exam questions with precise solutions
|| || || || || || || || ||
1. Which of the following clutch components is a driven member?!
|| || || || || || || || || ||
a. clutch cover
|| ||
b. clutch friction disc
|| || ||
c. intermediate plate
|| ||
d. pressure plate - ✔✔b. clutch friction disc
|| || || || || || ||
2. Which of the following is not a part of the clutch cover assembly?!
|| || || || || || || || || || || || ||
a. pressure spring
|| ||
b. release lever
|| ||
c. pressure plate
|| ||
d. adapter ring - ✔✔d. adapter ring
|| || || || || ||
3. Which of the following clutch components is splined to the input shaft of the
|| || || || || || || || || || || || || || ||
transmission?!
a. clutch friction disc
|| || ||
b. pressure plate
|| ||
c. release bearing
|| ||
d. flywheel - ✔✔a. clutch friction disc
|| || || || || ||
4. What is the function of a current clutch brake used in a heavy-duty drivetrain?!
|| || || || || || || || || || || || || ||
a. minimize gear clash during a neutral to first gear shift
|| || || || || || || || || ||
b. minimize gear clash during downshifts to all ratios
|| || || || || || || ||
c. minimize gear clash during upshifts to all ratios
|| || || || || || || ||
,2
d. none of the above - ✔✔a. minimize gear clash during a neutral to first gear shift
|| || || || || || || || || || || || || || || ||
5. Which of the following driving procedures will result in clutch or driveline damage?!
|| || || || || || || || || || || || ||
a. driving with a foot on the clutch pedal
|| || || || || || || ||
b. using the clutch as a brake to hold the truck on a hill and incline
|| || || || || || || || || || || || || || ||
c. coasting downhill with the transmission in gear and the clutch disengaged
|| || || || || || || || || || ||
d. all of the above - ✔✔d. all of the above
|| || || || || || || || || ||
6. Which of the following could be a cause of poor clutch release?!
|| || || || || || || || || || || ||
a. damaged drive pins
|| || ||
b. worn clutch linkage
|| || ||
c. worn release bearing
|| || ||
d. all of the above - ✔✔d. all of the above
|| || || || || || || || || ||
7. How often should a clutch be inspected and lubricated?!
|| || || || || || || || ||
a. every month
|| ||
b. every 6,000 to 10,000 miles
|| || || || ||
c. any time the chassis is lubricated
|| || || || || ||
d. all of the above - ✔✔d. all of the above
|| || || || || || || || || ||
8. When adjusting clutch linkage, Technician A says that pedal free travel should be about
|| || || || || || || || || || || || || || ||
1½ to 2|| ||
inches. Technician B says that free travel should be more than ½ inch measured at the
|| || || || || || || || || || || || || || || ||
release
forks. Who is correct?!
|| || ||
a. Technician A only
|| || ||
,2
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔a. Technician A only
|| || || || || || || || ||
9. When servicing clutches, Technician A always wears an OSHA-approved particulate
|| || || || || || || || || || ||
mask.
Technician B uses compressed air to clean off clutch components before removing a clutch
|| || || || || || || || || || || || ||
pack. Who is correct?!
|| || ||
a. Technician A only
|| || ||
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔a. Technician A only
|| || || || || || || || ||
10. In the procedure required to perform a clutch replacement on a truck, which of the
|| || || || || || || || || || || || || || || ||
following
steps should be performed first?!
|| || || ||
a. Unbolt the clutch from the flywheel.
|| || || || || ||
b. Remove the clutch brake.
|| || || ||
c. Install a clutch alignment tool through the release bearing.
|| || || || || || || || ||
d. Unbolt the transmission bell housing from the flywheel. - ✔✔a. Unbolt the clutch from
|| || || || || || || || || || || || || || ||
the flywheel
||
11. On which of the following types of flywheels would the center intermediate plate be
|| || || || || || || || || || || || || || ||
driven by ||
drive pins?! ||
a. flat flywheel
|| ||
b. pot flywheel
|| ||
, 2
c. torque converter
|| ||
d. all of the above - ✔✔b. pot flywheel
|| || || || || || || ||
12. Failure analysis determines that the facing of a clutch disc has burst. Technician A says
|| || || || || || || || || || || || || || || ||
that the ||
cause is the driver using the clutch as a brake. Technician B says that the problem might be
|| || || || || || || || || || || || || || || || || ||
the
driver coasting downhill with the transmission in gear and the clutch disengaged. Who is
|| || || || || || || || || || || || || ||
correct?!
a. Technician A only
|| || ||
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔b. Technician B only
|| || || || || || || || ||
13. When installing a 14-inch clutch, Technician A installs new drive pins in the flywheel.
|| || || || || || || || || || || || || || ||
Technician B ||
files the drive pin slots to ensure that proper clearances are met. Who is correct?!
|| || || || || || || || || || || || || ||
a. Technician A only
|| || ||
b. Technician B only
|| || ||
c. both A and B
|| || || ||
d. neither A nor B - ✔✔a. Technician A only
|| || || || || || || || ||
14. When regarding the operation of a typical 15½- inch clutch, which of the following
|| || || || || || || || || || || || || || ||
components
constantly rotates at engine rpm?! || || || ||
a. rear clutch disc
|| || ||
b. front clutch disc
|| || ||
