4G 4E hoisting
what is the purpose of 520 C.M.R 6:00 - Answer-to establish rules and regulations for the safety of the
public
what regulatory authority governs hoisting machinery - Answer-520-CMR 6:00 MGL chapter 146 section
53-54A
what type of system is used when working on a de energized circut - Answer-lock out tag out
in the event of death, the department of public safety must be notified of the accident within what time
frame - Answer-within one hour of the accident
in the event of an incident, serious injury, property damage, the department of public safety must be
notified within what time frame - Answer-within 1 hour of the accident and a report filed within 48
hours
what should be done when the boom of a crane needs to be welded - Answer-only welded by a
American welding society (AWS) certified welder, the boom must be lowered to the ground, chocked,
blocked and secured
what items should be checked on a daily inspection - Answer-wire ropes, bearings, gears, friction
clutches, brakes, chain drives, subject to wear
what type of protection should be given to the operator of material handling and moving equipment -
Answer-protection from the weather, heat in the winter, safety shatterproof glass, R.O.P (roll over
protection), hard hat
, what type of equipment requires hoisting license - Answer-equipment that has the minimum capability
of hoisting the load higher than 10 feet, or equipment that has the capability of lifting loads greater than
500 pounds, or equipment that has the capability of the bucket exceeding 1/4 cubic yard.
maximum limit of approach when operating machinery near power lines - Answer-up to 125,000 volts -
10 feet
125,000-250,000 volts - 15 feet
250,000 volts and up - 25 feet
what is dig safe - Answer-its the law
describe a slow moving vehicle triangle and what speed can they not excede - Answer-red triangle with
a orange interior, 25 mph
what do you refer to when determining your equipments general maint. and inspection - Answer-520
CMR 6:00
what is considered cushion safety - Answer-area inside swing of your machine
how many pounds in a ton - Answer-2000 pounds
who gives hand signals to the operator - Answer-the competent person that has been trained
when may chains be used in hoisting - Answer-never
when can chain slings be used in hoisting - Answer-as long as their in accordance with OSHA 1926.251
what is the purpose of 520 C.M.R 6:00 - Answer-to establish rules and regulations for the safety of the
public
what regulatory authority governs hoisting machinery - Answer-520-CMR 6:00 MGL chapter 146 section
53-54A
what type of system is used when working on a de energized circut - Answer-lock out tag out
in the event of death, the department of public safety must be notified of the accident within what time
frame - Answer-within one hour of the accident
in the event of an incident, serious injury, property damage, the department of public safety must be
notified within what time frame - Answer-within 1 hour of the accident and a report filed within 48
hours
what should be done when the boom of a crane needs to be welded - Answer-only welded by a
American welding society (AWS) certified welder, the boom must be lowered to the ground, chocked,
blocked and secured
what items should be checked on a daily inspection - Answer-wire ropes, bearings, gears, friction
clutches, brakes, chain drives, subject to wear
what type of protection should be given to the operator of material handling and moving equipment -
Answer-protection from the weather, heat in the winter, safety shatterproof glass, R.O.P (roll over
protection), hard hat
, what type of equipment requires hoisting license - Answer-equipment that has the minimum capability
of hoisting the load higher than 10 feet, or equipment that has the capability of lifting loads greater than
500 pounds, or equipment that has the capability of the bucket exceeding 1/4 cubic yard.
maximum limit of approach when operating machinery near power lines - Answer-up to 125,000 volts -
10 feet
125,000-250,000 volts - 15 feet
250,000 volts and up - 25 feet
what is dig safe - Answer-its the law
describe a slow moving vehicle triangle and what speed can they not excede - Answer-red triangle with
a orange interior, 25 mph
what do you refer to when determining your equipments general maint. and inspection - Answer-520
CMR 6:00
what is considered cushion safety - Answer-area inside swing of your machine
how many pounds in a ton - Answer-2000 pounds
who gives hand signals to the operator - Answer-the competent person that has been trained
when may chains be used in hoisting - Answer-never
when can chain slings be used in hoisting - Answer-as long as their in accordance with OSHA 1926.251
