CFT Monitor Certification Exam Questions with Solutions
1. What is the CFT specifically designed for?: To evaluate Strength, Stamina, agility, and coordina- tion as well as overall anaerobic
capacity.
2. CFT is conducted annually between what dates?: 1 July and 31 December
3. AS a monitor, there are feature of each CFT even that requires your direct attention to ensure
accurate and consistent oversight. For all three events, you be present with information about:: - Characteristics
and commands
- environmental considerations
- Set up
- Required Equipment
- Authorized Uniform
- Risk Management
- Performance Requirement
1/
10
, - Scoring
4. When administering the CFT, the events must be executed in this order:: 1. Movement to Contact (MTC) Event
2. Ammunition Lift (AL) Event
3. Maneuver Under Fire (MANUF) Event
5. MTC Simulates:: 880-Yard run that simulates ottensive operation of making contact, with the enemy on the battlefield.
6. Goal of the MTC: Complete the measured course as quickly as possible
7. Where can the MTC be conducted?: It can be conducted either indoor or outdoor
It can also be conducted on a track or measured surface and should not include numerous sharp turns. Needs to be on reasonably level ground
free of debris and obstacles
8. AL is designed for?: To challenge and assess the anaerobic endurance of the upper body
9. How much weight is the ammunition can: 30 Pounds
10. How long is the Ammunition Lift Event?: 2 mins
11. Who monitors overall?: Force Fitness Instructors (FFI) or Command Physical Training Representatives (CPTR) monitors.
12. How long is the MANUF?: 300 yard Shuttle run
13. What does the MANUF consists of?: - 300 Yard Shuttle
- crawls
- buddy drags and carries
2/
10
1. What is the CFT specifically designed for?: To evaluate Strength, Stamina, agility, and coordina- tion as well as overall anaerobic
capacity.
2. CFT is conducted annually between what dates?: 1 July and 31 December
3. AS a monitor, there are feature of each CFT even that requires your direct attention to ensure
accurate and consistent oversight. For all three events, you be present with information about:: - Characteristics
and commands
- environmental considerations
- Set up
- Required Equipment
- Authorized Uniform
- Risk Management
- Performance Requirement
1/
10
, - Scoring
4. When administering the CFT, the events must be executed in this order:: 1. Movement to Contact (MTC) Event
2. Ammunition Lift (AL) Event
3. Maneuver Under Fire (MANUF) Event
5. MTC Simulates:: 880-Yard run that simulates ottensive operation of making contact, with the enemy on the battlefield.
6. Goal of the MTC: Complete the measured course as quickly as possible
7. Where can the MTC be conducted?: It can be conducted either indoor or outdoor
It can also be conducted on a track or measured surface and should not include numerous sharp turns. Needs to be on reasonably level ground
free of debris and obstacles
8. AL is designed for?: To challenge and assess the anaerobic endurance of the upper body
9. How much weight is the ammunition can: 30 Pounds
10. How long is the Ammunition Lift Event?: 2 mins
11. Who monitors overall?: Force Fitness Instructors (FFI) or Command Physical Training Representatives (CPTR) monitors.
12. How long is the MANUF?: 300 yard Shuttle run
13. What does the MANUF consists of?: - 300 Yard Shuttle
- crawls
- buddy drags and carries
2/
10
