1|Page
Zabbix Certified Specialist Day 2 Exam ||Verified
Exam!!!|| Most Recent Exam 2026 Actual Complete
Real Exam Questions And Correct Detailed Answers
(Verified Answers) | Already Graded A+ | Guaranteed
Success!! | Newest Exam!!!
What command allows you to view the list of installed
packages on a Zabbix Agent? - Answer-zabbix_get -s
127.0.0.1 -k system.sw.packages[zabbix]
Can Zabbix agent be installed on Windows? - Answer-Yes
What field is mandatory for Zabbix agent to communicate
in Active Mode? - Answer-Hostname, it must be defined
the same on both the frontend host & in the
zabbix_agentd.conf file.
On which port is data from active Agents accepted? And
by what process? - Answer-Port 10051, by trapper
process.
Are interfaces required for Active Agent checks? - Answer-
No
,2|Page
What value in the zabbix_agentd.conf file needs to be
updated with the Zabbix Server or Proxy IP address? -
Answer-ServerActive
What command is used to return the Zabbix Agent
hostname? - Answer-zabbix_agentd -t system.hostname.
In the zabbix_agentd.conf file, what happens if multiple IP
addresses are listed under the ServerActive field? -
Answer-It will send data to all listed servers.
How often does the Agent retrieve configuration data from
the Zabbix Server? - Answer-On agent start and every 2
minutes.
What will happen to problems if the trigger they depend on
is in the PROBLEM state? - Answer-They will be
suppressed
Where can dependencies between triggers be defined? -
Answer-On the same host or on different hosts
, 3|Page
What is a Zabbix agent passive check? - Answer-Zabbix
server or proxy asks for a single metric and Zabbix agent
sends back the result.
What does not matter at all for passive checks? - Answer-
Host name
What must be specified to allow connectivity between
Zabbix Server and Zabbix Agent? - Answer-Server
parameter must match Zabbix server or proxy IP address
(or subnet).
What is the default number of pollers that are started at
once? - Answer-5
What is the Zabbix server timeout (connection timeout)? -
Answer-The number of seconds the Zabbix server will wait
for an answer from the agent.
What are 2 reasons for installing Zabbix_get? - Answer-To
gather data from the Agent, to run a passive test, can be
used in custom scripts.
Zabbix Certified Specialist Day 2 Exam ||Verified
Exam!!!|| Most Recent Exam 2026 Actual Complete
Real Exam Questions And Correct Detailed Answers
(Verified Answers) | Already Graded A+ | Guaranteed
Success!! | Newest Exam!!!
What command allows you to view the list of installed
packages on a Zabbix Agent? - Answer-zabbix_get -s
127.0.0.1 -k system.sw.packages[zabbix]
Can Zabbix agent be installed on Windows? - Answer-Yes
What field is mandatory for Zabbix agent to communicate
in Active Mode? - Answer-Hostname, it must be defined
the same on both the frontend host & in the
zabbix_agentd.conf file.
On which port is data from active Agents accepted? And
by what process? - Answer-Port 10051, by trapper
process.
Are interfaces required for Active Agent checks? - Answer-
No
,2|Page
What value in the zabbix_agentd.conf file needs to be
updated with the Zabbix Server or Proxy IP address? -
Answer-ServerActive
What command is used to return the Zabbix Agent
hostname? - Answer-zabbix_agentd -t system.hostname.
In the zabbix_agentd.conf file, what happens if multiple IP
addresses are listed under the ServerActive field? -
Answer-It will send data to all listed servers.
How often does the Agent retrieve configuration data from
the Zabbix Server? - Answer-On agent start and every 2
minutes.
What will happen to problems if the trigger they depend on
is in the PROBLEM state? - Answer-They will be
suppressed
Where can dependencies between triggers be defined? -
Answer-On the same host or on different hosts
, 3|Page
What is a Zabbix agent passive check? - Answer-Zabbix
server or proxy asks for a single metric and Zabbix agent
sends back the result.
What does not matter at all for passive checks? - Answer-
Host name
What must be specified to allow connectivity between
Zabbix Server and Zabbix Agent? - Answer-Server
parameter must match Zabbix server or proxy IP address
(or subnet).
What is the default number of pollers that are started at
once? - Answer-5
What is the Zabbix server timeout (connection timeout)? -
Answer-The number of seconds the Zabbix server will wait
for an answer from the agent.
What are 2 reasons for installing Zabbix_get? - Answer-To
gather data from the Agent, to run a passive test, can be
used in custom scripts.
