Massachusetts 1C Hoisting License Questions With
Complete Solutions
1C licenses can be revoked for Correct Answers Providing false
information, OUI, failure to pay excise taxes, failure to report
accidents and injuries, operating an unsafe manner.
ANSI stands for what Correct Answers American National
Standards Institute
ASME stands for Correct Answers American Society of
Mechanical Engineers
Attachments must be Correct Answers Approved by the
manufacturer
Before conducting maintenance, hydraulic pressure Correct
Answers should be relieved
Before lifting the operator should know or estimate what two
things about the load? Correct Answers The weight and load
center
Before lifting the operator should know what about the
machine? Correct Answers The rated load capacity
Caution signal word indicates Correct Answers Hazardous
situation COULD result in MINOR or MODERATE injury
Clearance required for power lines Correct Answers 10 ft
, Construction forklifts Correct Answers Carriage attached to
base and can move loads vertically and horizontally
Control configuration for starting Correct Answers Set breaks,
controls neutral.
Daily inspection logs are to be maintained per OSHA
requirements of Correct Answers all parts subject to wear
Danger signal word indicates Correct Answers Hazardous
situation that WILL result in death or serious injury
Definition of a forklift Correct Answers Any mobile powered-
propelled truck used to carry, push, lift, pull, stack or tier
materials.
Definition of an emergency procedure Correct Answers Actions
required to be taken when imminent danger may occur.
Definition of property damage Correct Answers Damage that
exceeds $5,000 per incident.
Do not retract forks from the load until Correct Answers the
weight is secure on the landing point
DOT stands for what Correct Answers Department of
Transportation
Double-tiered loads are Correct Answers Difficult to control
and should be avoided.
Complete Solutions
1C licenses can be revoked for Correct Answers Providing false
information, OUI, failure to pay excise taxes, failure to report
accidents and injuries, operating an unsafe manner.
ANSI stands for what Correct Answers American National
Standards Institute
ASME stands for Correct Answers American Society of
Mechanical Engineers
Attachments must be Correct Answers Approved by the
manufacturer
Before conducting maintenance, hydraulic pressure Correct
Answers should be relieved
Before lifting the operator should know or estimate what two
things about the load? Correct Answers The weight and load
center
Before lifting the operator should know what about the
machine? Correct Answers The rated load capacity
Caution signal word indicates Correct Answers Hazardous
situation COULD result in MINOR or MODERATE injury
Clearance required for power lines Correct Answers 10 ft
, Construction forklifts Correct Answers Carriage attached to
base and can move loads vertically and horizontally
Control configuration for starting Correct Answers Set breaks,
controls neutral.
Daily inspection logs are to be maintained per OSHA
requirements of Correct Answers all parts subject to wear
Danger signal word indicates Correct Answers Hazardous
situation that WILL result in death or serious injury
Definition of a forklift Correct Answers Any mobile powered-
propelled truck used to carry, push, lift, pull, stack or tier
materials.
Definition of an emergency procedure Correct Answers Actions
required to be taken when imminent danger may occur.
Definition of property damage Correct Answers Damage that
exceeds $5,000 per incident.
Do not retract forks from the load until Correct Answers the
weight is secure on the landing point
DOT stands for what Correct Answers Department of
Transportation
Double-tiered loads are Correct Answers Difficult to control
and should be avoided.
