MSF Basic eCourse About Basic
Operation 2026 Exam Questions and
Answers | 100% Solved
FINE-C - 🧠 ANSWER ✔✔FINE-C refers to an engine pre-start routine. It
stands for Fuel, Ignition, Neutral, Engine cut-off switch, Choke and Clutch.
F - 🧠 ANSWER ✔✔Fuel, means if equipped, turn the fuel supply valve On.
I - 🧠 ANSWER ✔✔Ignition, means turn the ignition switch to the On
position. Some indicator lights should come on.
N - 🧠 ANSWER ✔✔Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral, the motorcycle will
,roll forward and backward with the clutch lever and front brake lever
released.
E - 🧠 ANSWER ✔✔Engine cut-off switch means put the switch in the
Run/On position.
C - 🧠 ANSWER ✔✔Choke and Clutch, means to set the choke and
squeeze in the clutch lever. The choke should be On for a cold engine,
although some motorcycles do not have a choke.
Engine start procedure - 🧠 ANSWER ✔✔When starting the engine: Apply at
least one of the brakes.
Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could provide too much
fuel to the engine.
, Once the engine is started, you can release the clutch lever, but do so
slowly in case the motorcycle is not in neutral.
Some engines will not start if the side stand is down. Many motorcycles will
allow the engine to start but will stall when the motorcycle is shifted into
gear when the side stand is down.
Engine stop procedure - 🧠 ANSWER ✔✔To stop the engine:
First, move the engine cut-off switch to Off with your right thumb. Do this
every time so you can develop the habit in case you need to shut off the
engine in an emergency.
Turn the ignition switch to Off.
Turn the fuel supply valve Off if it has that position.
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
Operation 2026 Exam Questions and
Answers | 100% Solved
FINE-C - 🧠 ANSWER ✔✔FINE-C refers to an engine pre-start routine. It
stands for Fuel, Ignition, Neutral, Engine cut-off switch, Choke and Clutch.
F - 🧠 ANSWER ✔✔Fuel, means if equipped, turn the fuel supply valve On.
I - 🧠 ANSWER ✔✔Ignition, means turn the ignition switch to the On
position. Some indicator lights should come on.
N - 🧠 ANSWER ✔✔Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral, the motorcycle will
,roll forward and backward with the clutch lever and front brake lever
released.
E - 🧠 ANSWER ✔✔Engine cut-off switch means put the switch in the
Run/On position.
C - 🧠 ANSWER ✔✔Choke and Clutch, means to set the choke and
squeeze in the clutch lever. The choke should be On for a cold engine,
although some motorcycles do not have a choke.
Engine start procedure - 🧠 ANSWER ✔✔When starting the engine: Apply at
least one of the brakes.
Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could provide too much
fuel to the engine.
, Once the engine is started, you can release the clutch lever, but do so
slowly in case the motorcycle is not in neutral.
Some engines will not start if the side stand is down. Many motorcycles will
allow the engine to start but will stall when the motorcycle is shifted into
gear when the side stand is down.
Engine stop procedure - 🧠 ANSWER ✔✔To stop the engine:
First, move the engine cut-off switch to Off with your right thumb. Do this
every time so you can develop the habit in case you need to shut off the
engine in an emergency.
Turn the ignition switch to Off.
Turn the fuel supply valve Off if it has that position.
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
