NCCER IRONWORKER EXAM NEWEST 2026 ACTAL
EXAM
WITH COMPLETE 90 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) ALREADY
GRADED A+ | GUARANTEED PASS
Assuming a grip distance of 1", what is the minimun length of the bolt required for
a 3/4" diameter bolt? - ✔✔✔ Correct Answer > 2 1/4"
The location of bridging depends on the length of the: - ✔✔✔ Correct Answer > span
Before bundles of deck can be landed on a bar joist, what action must be
completed? - ✔✔✔ Correct Answer > joist must have bridging installed
When materials are being hoisted to an upper level, a tag line is used to: - ✔✔✔
Correct Answer > help control the load
Items such as field welding instructions, hangers, and connection details are
generally found on: - ✔✔✔ Correct Answer > the detail drawings
The ability of a structural steel component to resist pulling forces is known as: -
✔✔✔ Correct Answer > tensile strenght
, What type of decking has impressions formed on its rib? - ✔✔✔ Correct Answer >
composite deck
The ground floor elevation is shown as +100.25. The roof top elevation is shown
as +130.50. What is the difference in elevation? - ✔✔✔ Correct Answer > 30'3
In what drawing would one find the correct bolt size for a beam being bolted? -
✔✔✔ Correct Answer > detail drawing
What should always be used to ignite a cutting torch? - ✔✔✔ Correct Answer > striker
Equilizing the weight of the load at various lifting points is called: - ✔✔✔ Correct Answer >
configuration
A combination square without a protractor head is used to layout: - ✔✔✔ Correct
Answer > 45 degree lines
Prior to inspection it is good practice to test all studs with what method? - ✔✔✔
Correct Answer > ping test
Where is the fulcrum or pivot point on a forklift? - ✔✔✔ Correct Answer > the front axle
A document that outlines weights,crane configuration and rigging requirements
for a lift is called an: - ✔✔✔ Correct Answer > lift plan
EXAM
WITH COMPLETE 90 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) ALREADY
GRADED A+ | GUARANTEED PASS
Assuming a grip distance of 1", what is the minimun length of the bolt required for
a 3/4" diameter bolt? - ✔✔✔ Correct Answer > 2 1/4"
The location of bridging depends on the length of the: - ✔✔✔ Correct Answer > span
Before bundles of deck can be landed on a bar joist, what action must be
completed? - ✔✔✔ Correct Answer > joist must have bridging installed
When materials are being hoisted to an upper level, a tag line is used to: - ✔✔✔
Correct Answer > help control the load
Items such as field welding instructions, hangers, and connection details are
generally found on: - ✔✔✔ Correct Answer > the detail drawings
The ability of a structural steel component to resist pulling forces is known as: -
✔✔✔ Correct Answer > tensile strenght
, What type of decking has impressions formed on its rib? - ✔✔✔ Correct Answer >
composite deck
The ground floor elevation is shown as +100.25. The roof top elevation is shown
as +130.50. What is the difference in elevation? - ✔✔✔ Correct Answer > 30'3
In what drawing would one find the correct bolt size for a beam being bolted? -
✔✔✔ Correct Answer > detail drawing
What should always be used to ignite a cutting torch? - ✔✔✔ Correct Answer > striker
Equilizing the weight of the load at various lifting points is called: - ✔✔✔ Correct Answer >
configuration
A combination square without a protractor head is used to layout: - ✔✔✔ Correct
Answer > 45 degree lines
Prior to inspection it is good practice to test all studs with what method? - ✔✔✔
Correct Answer > ping test
Where is the fulcrum or pivot point on a forklift? - ✔✔✔ Correct Answer > the front axle
A document that outlines weights,crane configuration and rigging requirements
for a lift is called an: - ✔✔✔ Correct Answer > lift plan
