IRONWORKER NCCER ACTUAL
EXAM 120+ QUESTIONS AND
ANSWERS LATEST STUDY GUIDE
2026 GRADED A+ .
1/
11
, 1. ASSUMING A GRIP DISTANCE OF 1", WHAT IS THE MINIMUN LENGTH OF THE BOLT REQUIRED FOR A 3/4"
DIAMETER BOLT? ✔✔ correct answer 2 1/4"
2. THE LOCATION OF BRIDGING DEPENDS ON THE LENGTH OF THE ✔✔ correct answer ✔✔ correct answer SPAN
3. BEFORE BUNDLES OF DECK CAN BE LANDED ON A BAR JOIST, WHAT ACTION MUST BE COMPLETED? ✔✔
correct answer JOIST MUST HAVE BRIDGING INSTALLED
4. WHEN MATERIALS ARE BEING HOISTED TO AN UPPER LEVEL, A TAG LINE IS USED TO ✔✔ correct answer ✔✔
correct answer HELP CONTROL THE LOAD
5. ITEMS SUCH AS FIELD WELDING INSTRUCTIONS, HANGERS, AND CONNEC- TION DETAILS ARE
GENERALLY FOUND ON ✔✔ correct answer ✔✔ correct answer THE DETAIL DRAWINGS
6. THE ABILITY OF A STRUCTURAL STEEL COMPONENT TO RESIST PULLING FORCES IS KNOWN AS ✔✔
correct answer ✔✔ correct answer TENSILE STRENGHT
7. WHAT TYPE OF DECKING HAS IMPRESSIONS FORMED ON ITS RIB? ✔✔ correct answer COMPOSITE DECK
8. THE GROUND FLOOR ELEVATION IS SHOWN AS +100.25. THE ROOF TOP ELE- VATION IS SHOWN AS +130.50.
WHAT IS THE DIFFERENCE IN ELEVATION? ✔✔ correct answer 30'3
9. IN WHAT DRAWING WOULD ONE FIND THE CORRECT BOLT SIZE FOR A BEAM BEING BOLTED? ✔✔ correct answer
DETAIL DRAWING
10. WHAT SHOULD ALWAYS BE USED TO IGNITE A CUTTING TORCH? ✔✔ correct answer STRIKER
11. EQUILIZING THE WEIGHT OF THE LOAD AT VARIOUS LIFTING POINTS IS CALLED ✔✔ correct answer ✔
✔ correct answer CONFIGURATION
12. A COMBINATION SQUARE WITHOUT A PROTRACTOR HEAD IS USED TO LAY- OUT ✔✔ correct answer ✔✔
correct answer 45 DEGREE LINES
13. PRIOR TO INSPECTION IT IS GOOD PRACTICE TO TEST ALL STUDS WITH WHAT METHOD? ✔✔ correct
answer PING TEST
14. WHERE IS THE FULCRUM OR PIVOT POINT ON A FORKLIFT? ✔✔ correct answer THE FRONT AXLE
15. A DOCUMENT THAT OUTLINES WEIGHTS,CRANE CONFIGURATION AND RIG- GING REQUIREMENTS FOR A
LIFT IS CALLED AN ✔✔ correct answer ✔✔ correct answer LIFT PLAN
16. WHERE CAN THE BOLTING METHODS REGARDING STRUCTURAL STEEL USU- ALLY BE FOUND ? ✔✔ correct answer
IN THE GENERAL NOTES OF THE STRUCTURAL DRAWINGS
17. WHEN ESTABLISHING ELEVATIONS OF STRUCTURAL STEEL MEMBERS, THE REFERENCE POINT USED TO
2/
11
EXAM 120+ QUESTIONS AND
ANSWERS LATEST STUDY GUIDE
2026 GRADED A+ .
1/
11
, 1. ASSUMING A GRIP DISTANCE OF 1", WHAT IS THE MINIMUN LENGTH OF THE BOLT REQUIRED FOR A 3/4"
DIAMETER BOLT? ✔✔ correct answer 2 1/4"
2. THE LOCATION OF BRIDGING DEPENDS ON THE LENGTH OF THE ✔✔ correct answer ✔✔ correct answer SPAN
3. BEFORE BUNDLES OF DECK CAN BE LANDED ON A BAR JOIST, WHAT ACTION MUST BE COMPLETED? ✔✔
correct answer JOIST MUST HAVE BRIDGING INSTALLED
4. WHEN MATERIALS ARE BEING HOISTED TO AN UPPER LEVEL, A TAG LINE IS USED TO ✔✔ correct answer ✔✔
correct answer HELP CONTROL THE LOAD
5. ITEMS SUCH AS FIELD WELDING INSTRUCTIONS, HANGERS, AND CONNEC- TION DETAILS ARE
GENERALLY FOUND ON ✔✔ correct answer ✔✔ correct answer THE DETAIL DRAWINGS
6. THE ABILITY OF A STRUCTURAL STEEL COMPONENT TO RESIST PULLING FORCES IS KNOWN AS ✔✔
correct answer ✔✔ correct answer TENSILE STRENGHT
7. WHAT TYPE OF DECKING HAS IMPRESSIONS FORMED ON ITS RIB? ✔✔ correct answer COMPOSITE DECK
8. THE GROUND FLOOR ELEVATION IS SHOWN AS +100.25. THE ROOF TOP ELE- VATION IS SHOWN AS +130.50.
WHAT IS THE DIFFERENCE IN ELEVATION? ✔✔ correct answer 30'3
9. IN WHAT DRAWING WOULD ONE FIND THE CORRECT BOLT SIZE FOR A BEAM BEING BOLTED? ✔✔ correct answer
DETAIL DRAWING
10. WHAT SHOULD ALWAYS BE USED TO IGNITE A CUTTING TORCH? ✔✔ correct answer STRIKER
11. EQUILIZING THE WEIGHT OF THE LOAD AT VARIOUS LIFTING POINTS IS CALLED ✔✔ correct answer ✔
✔ correct answer CONFIGURATION
12. A COMBINATION SQUARE WITHOUT A PROTRACTOR HEAD IS USED TO LAY- OUT ✔✔ correct answer ✔✔
correct answer 45 DEGREE LINES
13. PRIOR TO INSPECTION IT IS GOOD PRACTICE TO TEST ALL STUDS WITH WHAT METHOD? ✔✔ correct
answer PING TEST
14. WHERE IS THE FULCRUM OR PIVOT POINT ON A FORKLIFT? ✔✔ correct answer THE FRONT AXLE
15. A DOCUMENT THAT OUTLINES WEIGHTS,CRANE CONFIGURATION AND RIG- GING REQUIREMENTS FOR A
LIFT IS CALLED AN ✔✔ correct answer ✔✔ correct answer LIFT PLAN
16. WHERE CAN THE BOLTING METHODS REGARDING STRUCTURAL STEEL USU- ALLY BE FOUND ? ✔✔ correct answer
IN THE GENERAL NOTES OF THE STRUCTURAL DRAWINGS
17. WHEN ESTABLISHING ELEVATIONS OF STRUCTURAL STEEL MEMBERS, THE REFERENCE POINT USED TO
2/
11
