NACE CIP 1 CBT Exam
NACE CIP 1 CBT EXAM (QUIZZES AND STUDY QUESTIONS)
NEWEST ACTUAL EXAM WITH COMPLETE 200 QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+
What should you do if you find discrepancies between the specification and the
coating manufacturer’s technical data sheet?
a) Follow the data sheet automatically
b) Ignore minor discrepancies
c) Seek written clarification from the owner’s representative
d) Stop work permanently
Correct answer: c)
What are the general components of inspection reports?
a) Weather data, contractor opinions, cost summaries
b) Results of inspection tests, location(s) of work, details of preparation and
application
c) Equipment lists, material pricing, labor hours
d) Safety violations only
Correct answer: b)
Inspection reports typically provide sufficient detail permitting the owner to
evaluate ___ ___ ___ ___
a) Material costs, crew size, profit margins, delays
b) Contractor’s performance, inspector’s performance, job progress, work
interruptions
1|Page
, NACE CIP 1 CBT Exam
c) Weather patterns, site access, equipment wear, delivery schedules
d) Safety programs, training records, permits, certifications
Correct answer: b)
As an inspector headed to the job site for the first time, where would you always
find instruction regarding appropriate types of PPE?
a) Project specification
b) Safety Data Sheet (SDS), previously called MSDS
c) Contractor safety manual
d) Owner’s procedures
Correct answer: b)
Materials inventory report should contain which of the following?
a) Quantity of each component of each material onsite, material batch numbers,
and date of materials arrival and storage information
b) Contractor work hours and equipment lists
c) Inspection results and weather readings
d) Safety meeting attendance records
Correct answer: a)
The primary function of the coating inspector is _____
a) Contractor supervision
b) Safety enforcement
c) Specification compliance
d) Cost control
Correct answer: c)
2|Page
, NACE CIP 1 CBT Exam
High humidity in the air during coating application can cause _____
a) Improved curing
b) Solvent entrapment
c) Increased adhesion
d) Reduced film thickness
Correct answer: b)
The temperature at which moisture condenses on a surface is called _____
a) Flash point
b) Surface temperature
c) Relative humidity
d) Dew point
Correct answer: d)
Where should the steel surface temperature reading be taken?
a) At the weather station
b) In shaded areas only
c) At the actual work location
d) At ground level
Correct answer: c)
What type of water should be added to a sling psychrometer?
a) Tap water
b) Filtered water
3|Page
, NACE CIP 1 CBT Exam
c) Distilled water
d) Salt water
Correct answer: c)
Which type of coating is manufactured with specific components added to slow
down the activity of the electrochemical cell?
a) Barrier
b) Sacrificial
c) Inhibitive
d) Intumescent
Correct answer: c)
How is the process of steel corrosion ALWAYS described?
a) Mechanical
b) Chemical
c) Electrochemical
d) Thermal
Correct answer: c)
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which
three materials can be used effectively as galvanic anodes for carbon steel?
a) Copper, nickel, stainless steel
b) Zinc, aluminum, magnesium
c) Lead, tin, bronze
d) Iron, carbon steel, cast iron
Correct answer: b)
4|Page
NACE CIP 1 CBT EXAM (QUIZZES AND STUDY QUESTIONS)
NEWEST ACTUAL EXAM WITH COMPLETE 200 QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+
What should you do if you find discrepancies between the specification and the
coating manufacturer’s technical data sheet?
a) Follow the data sheet automatically
b) Ignore minor discrepancies
c) Seek written clarification from the owner’s representative
d) Stop work permanently
Correct answer: c)
What are the general components of inspection reports?
a) Weather data, contractor opinions, cost summaries
b) Results of inspection tests, location(s) of work, details of preparation and
application
c) Equipment lists, material pricing, labor hours
d) Safety violations only
Correct answer: b)
Inspection reports typically provide sufficient detail permitting the owner to
evaluate ___ ___ ___ ___
a) Material costs, crew size, profit margins, delays
b) Contractor’s performance, inspector’s performance, job progress, work
interruptions
1|Page
, NACE CIP 1 CBT Exam
c) Weather patterns, site access, equipment wear, delivery schedules
d) Safety programs, training records, permits, certifications
Correct answer: b)
As an inspector headed to the job site for the first time, where would you always
find instruction regarding appropriate types of PPE?
a) Project specification
b) Safety Data Sheet (SDS), previously called MSDS
c) Contractor safety manual
d) Owner’s procedures
Correct answer: b)
Materials inventory report should contain which of the following?
a) Quantity of each component of each material onsite, material batch numbers,
and date of materials arrival and storage information
b) Contractor work hours and equipment lists
c) Inspection results and weather readings
d) Safety meeting attendance records
Correct answer: a)
The primary function of the coating inspector is _____
a) Contractor supervision
b) Safety enforcement
c) Specification compliance
d) Cost control
Correct answer: c)
2|Page
, NACE CIP 1 CBT Exam
High humidity in the air during coating application can cause _____
a) Improved curing
b) Solvent entrapment
c) Increased adhesion
d) Reduced film thickness
Correct answer: b)
The temperature at which moisture condenses on a surface is called _____
a) Flash point
b) Surface temperature
c) Relative humidity
d) Dew point
Correct answer: d)
Where should the steel surface temperature reading be taken?
a) At the weather station
b) In shaded areas only
c) At the actual work location
d) At ground level
Correct answer: c)
What type of water should be added to a sling psychrometer?
a) Tap water
b) Filtered water
3|Page
, NACE CIP 1 CBT Exam
c) Distilled water
d) Salt water
Correct answer: c)
Which type of coating is manufactured with specific components added to slow
down the activity of the electrochemical cell?
a) Barrier
b) Sacrificial
c) Inhibitive
d) Intumescent
Correct answer: c)
How is the process of steel corrosion ALWAYS described?
a) Mechanical
b) Chemical
c) Electrochemical
d) Thermal
Correct answer: c)
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which
three materials can be used effectively as galvanic anodes for carbon steel?
a) Copper, nickel, stainless steel
b) Zinc, aluminum, magnesium
c) Lead, tin, bronze
d) Iron, carbon steel, cast iron
Correct answer: b)
4|Page
