HAAS MILL UPDATED CODES TEST QUESTIONS AND SOLUTIONS GUARANTEE A+

HAAS MILL UPDATED CODES TEST QUESTIONS AND
SOLUTIONS GUARANTEE A+
✔✔g42 - ✔✔2D CUTTER COMPENSATION, RIGHT

✔✔g43 - ✔✔TOOL LENGTH COMPENSATION+

✔✔g44 - ✔✔TOOL LENGTH COMPENSATION-

✔✔g47 - ✔✔TEXT ENGRAVING

✔✔g49 - ✔✔TOOL LENGTH COMPENSATION CANCEL

✔✔g50 - ✔✔SCALING G51 CANCEL

✔✔g51 - ✔✔SCALING

✔✔g52 - ✔✔GLOBAL WORK COORDINATE OFFSET SHIFT

✔✔g53 - ✔✔MACHINE COORDINATE POSITIONING, NON-MODAL

✔✔g54 - ✔✔WORK OFFSET COORDINATE POSITIONING #1

✔✔g55 - ✔✔WORK OFFSET COORDINATE POSITIONING #2

✔✔g56 - ✔✔WORK OFFSET COORDINATE POSITIONING #3

✔✔g57 - ✔✔WORK OFFSET COORDINATE POSITIONING #4

✔✔g58 - ✔✔G57 WORK OFFSET COORDINATE POSITIONING #4

✔✔g59 - ✔✔G59 WORK OFFSET COORDINATE POSITIONING #6

✔✔g60 - ✔✔UNI-DIRECTIONAL POSITIONING

✔✔g61 - ✔✔EXACT STOP, MODAL

✔✔g64 - ✔✔EXACT STOP G61 MODE CANCEL

✔✔g65 - ✔✔MACRO SUB-ROUTINE

✔✔g68 - ✔✔ROTATION FOR CURCLAR MOTION PLANE SELECTION

, ✔✔g69 - ✔✔ROTATION G68 CANCEL

✔✔g70 - ✔✔BOLT HOLE CIRCLE with a CANNED CYCLE

✔✔g71 - ✔✔BOLT HOLE ARC with a CANNED CYCLE

✔✔g72 - ✔✔BOLT HOLES ALONG AN ANGLE with a CANNED CYCLE

✔✔g73 - ✔✔HIGH SPEED PECK DRILL CANNED CYCLE

✔✔g74 - ✔✔REVERSE TAPPING CANNED CYCLE

✔✔g76 - ✔✔FINE BORING CANNED CYCLE

✔✔g77 - ✔✔BACK BORE CANNED CYCLE

✔✔g80 - ✔✔CANCEL CANNED CYCLE

✔✔g81 - ✔✔DRILL CANNED CYCLE

✔✔g82 - ✔✔SPOT DRILL / COUNTERBORE CANNED CYCLE

✔✔g83 - ✔✔PECK DRILL CANNED CYCLE

✔✔g84 - ✔✔TAPPING CANNED CYCLE

✔✔g85 - ✔✔BORE IN, BORE OUT CANNED CYCLE

✔✔g86 - ✔✔BORE IN, STOP, RAPID OUT CANNED CYCLE

✔✔g87 - ✔✔BORE IN AND MANUAL RETRACT CANNED CYCLE

✔✔g88 - ✔✔BORE IN, DWELL, MANUAL RETRACT CANNED CYCLE

✔✔g89 - ✔✔BORE IN, DWELL, BORE OUT

✔✔g90 - ✔✔ABSOLUTE POSITIONING

✔✔g91 - ✔✔INCREMENTAL POSITIONING

✔✔g92 - ✔✔GLOBAL WORK COORDINATE SYSTEM SHIFT

✔✔g93 - ✔✔INVERSE TIME FEED MODE ON