CSWA Solidworks Certification Exam 2026 | All
Questions and Correct Answers | Verified
Answers | Graded A+ | Just Released
When sketching a Centerpoint Straight Slot, the second point selection sets: -------
--CORRECT ANSWER-----------------The endpoint of the central axis
What sketch tool requires more than 3 points to be selected to create the profile?
---------CORRECT ANSWER-----------------Partial Ellipse
If a horizontal straight slot has been drawn without any sketch relations or
dimensions added, which aspects of the sketch will be modified when the
endpoint of the centerline is dragged? ---------CORRECT ANSWER-----------------The
length and vertical position of the slot
Before starting the exam: ---------CORRECT ANSWER-----------------Open SolidWorks,
open new part file, set units, and set material.
Used in SOLIDWORKS in both Sketches and Features to control the value of a
dimension. ---------CORRECT ANSWER-----------------Global Variables
,A single view based on a predefined view orientation. ---------CORRECT ANSWER---
--------------Model View
A projected view is an orthographic projection of a parent view at 90 degrees.
(Right, Top, Left, B ---------CORRECT ANSWER-----------------Projected View
: An auxiliary view is a projected view that is normal to a reference edge. ---------
CORRECT ANSWER-----------------Auxiliary View
: Created by cutting the parent view using a section line in order to see inside
details. ---------CORRECT ANSWER-----------------Section View
: A section view that does not cut through the entire model. ---------CORRECT
ANSWER-----------------Partial Section View
: Special types of section views that allow you to show details of a section created
at an angle. ---------CORRECT ANSWER-----------------Aligned Section View
______are commonly used for drawing with rotational symmetry such as wheels
or flanges that have holes or other features arrayed in a circular pattern. ---------
CORRECT ANSWER-----------------Aligned Section View
, In an aligned section view, if a standard section line cannot be drawn vertically or
horizontally to go through the center of a feature then______ is used that does
not line up with the parent view.: ---------CORRECT ANSWER-----------------angled
section line
: Cut away a portion of an assembly in order to expose the inside.
emplate. ---------CORRECT ANSWER-----------------Broken-Out Section View
: Show portions of a model that are difficult to see in the parent view. ---------
CORRECT ANSWER-----------------Detail View
: Define views by selecting any face from the model that does not require a
parent view or have a view arrow. ---------CORRECT ANSWER-----------------Relative
to Model View
: Create a break/gap in a model so that the view can fit on a smaller drawing
sheet. ---------CORRECT ANSWER-----------------Break View
True or False - Dragging the edge of plane changes its geometric size. ---------
CORRECT ANSWER-----------------False
Questions and Correct Answers | Verified
Answers | Graded A+ | Just Released
When sketching a Centerpoint Straight Slot, the second point selection sets: -------
--CORRECT ANSWER-----------------The endpoint of the central axis
What sketch tool requires more than 3 points to be selected to create the profile?
---------CORRECT ANSWER-----------------Partial Ellipse
If a horizontal straight slot has been drawn without any sketch relations or
dimensions added, which aspects of the sketch will be modified when the
endpoint of the centerline is dragged? ---------CORRECT ANSWER-----------------The
length and vertical position of the slot
Before starting the exam: ---------CORRECT ANSWER-----------------Open SolidWorks,
open new part file, set units, and set material.
Used in SOLIDWORKS in both Sketches and Features to control the value of a
dimension. ---------CORRECT ANSWER-----------------Global Variables
,A single view based on a predefined view orientation. ---------CORRECT ANSWER---
--------------Model View
A projected view is an orthographic projection of a parent view at 90 degrees.
(Right, Top, Left, B ---------CORRECT ANSWER-----------------Projected View
: An auxiliary view is a projected view that is normal to a reference edge. ---------
CORRECT ANSWER-----------------Auxiliary View
: Created by cutting the parent view using a section line in order to see inside
details. ---------CORRECT ANSWER-----------------Section View
: A section view that does not cut through the entire model. ---------CORRECT
ANSWER-----------------Partial Section View
: Special types of section views that allow you to show details of a section created
at an angle. ---------CORRECT ANSWER-----------------Aligned Section View
______are commonly used for drawing with rotational symmetry such as wheels
or flanges that have holes or other features arrayed in a circular pattern. ---------
CORRECT ANSWER-----------------Aligned Section View
, In an aligned section view, if a standard section line cannot be drawn vertically or
horizontally to go through the center of a feature then______ is used that does
not line up with the parent view.: ---------CORRECT ANSWER-----------------angled
section line
: Cut away a portion of an assembly in order to expose the inside.
emplate. ---------CORRECT ANSWER-----------------Broken-Out Section View
: Show portions of a model that are difficult to see in the parent view. ---------
CORRECT ANSWER-----------------Detail View
: Define views by selecting any face from the model that does not require a
parent view or have a view arrow. ---------CORRECT ANSWER-----------------Relative
to Model View
: Create a break/gap in a model so that the view can fit on a smaller drawing
sheet. ---------CORRECT ANSWER-----------------Break View
True or False - Dragging the edge of plane changes its geometric size. ---------
CORRECT ANSWER-----------------False
