NCCER CORE MODULE 1 EXAM PRACTICE
QUESTIONS WITH VERIFIED ANSWERS
Companies with strong safety cultures usually have lower?
Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing
each step for
potential hazards is called a _____.
Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to
as _____.
Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _____.
Cover and mark it
The D-ring or support point on a safety harness should be placed _____.
Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____.
Competent person
Lanyards that have no shock-absorbing features are used for _____.
Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where
the ladder touches the platform or roof by at least _____.
3 Feet
When performing overhead work on scaffolding, what protective measures must be taken
to prevent objects
from falling and striking a person below?
toe boards, debris nets, or canopies
QUESTIONS WITH VERIFIED ANSWERS
Companies with strong safety cultures usually have lower?
Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing
each step for
potential hazards is called a _____.
Job Safety Analysis
A measure of the probability, consequences, and exposure related to an event is referred to
as _____.
Risk
If there is a hole in the floor of a structure, the preferred method of protecting workers
from falls is to _____.
Cover and mark it
The D-ring or support point on a safety harness should be placed _____.
Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____.
Competent person
Lanyards that have no shock-absorbing features are used for _____.
Positioning
When placing a ladder against a platform or roof, the top of the ladder should extend
above the point where
the ladder touches the platform or roof by at least _____.
3 Feet
When performing overhead work on scaffolding, what protective measures must be taken
to prevent objects
from falling and striking a person below?
toe boards, debris nets, or canopies
