NCCCO RIGGER 2 EXAM ACTUAL 2026
QUESTIONS AND 100% CORRECT ANSWERS
Eyebolts used with an angular load applied must be of a ______ type
Shouldered
A cylindrical aluminum tank is 12 ft high. The flat tank top and bottom have a
diameter of 6ft. The tank walls are 1/2 inch thick. Calculate the approximate tank
weight.
1978 lbs.
What is the coefficient of friction (CF) for moving metal against concrete?
.1
3 multiple choice options
A rigging block is attached to a 4,500 lb load. If 4 parts of line are used with the
block (neglect friction), what is the minimum amount of line pull required to lift
the 4,500 lb load?
1125 lbs
3 multiple choice options
According to ASME B30.10, the maximum hook throat opening must not exceed ?
5% of its original opening
, NCCCO RIGGER 2 EXAM ACTUAL 2026
QUESTIONS AND 100% CORRECT ANSWERS
3 multiple choice options
Based on the information below, what is the minimum size chain sling needed? 4
leg-bridleLegs at 60 degreesGrade 80Load Weight = 35,492 lbs
5/8"
When inspecting a custom designed lifting accessory, the following markings
should be readily identifiable on the device.
Working Load Limit, serial number, weight (if over 100 lbs.), manufacturer name
and contact information.
A cylindrical steel tank is 10ft high. The flat tank top and bottom have a diameter
of 6 ft. The tank walls are 3/4 inch thick. Calculate the approximate tank weight.
7,348 lbs
3 multiple choice options
A steel plate is 30 ft. long, 27 inches wide, and 1/4 inch thick. Calculate the weight
of the plate.
675 lbs
3 multiple choice options
QUESTIONS AND 100% CORRECT ANSWERS
Eyebolts used with an angular load applied must be of a ______ type
Shouldered
A cylindrical aluminum tank is 12 ft high. The flat tank top and bottom have a
diameter of 6ft. The tank walls are 1/2 inch thick. Calculate the approximate tank
weight.
1978 lbs.
What is the coefficient of friction (CF) for moving metal against concrete?
.1
3 multiple choice options
A rigging block is attached to a 4,500 lb load. If 4 parts of line are used with the
block (neglect friction), what is the minimum amount of line pull required to lift
the 4,500 lb load?
1125 lbs
3 multiple choice options
According to ASME B30.10, the maximum hook throat opening must not exceed ?
5% of its original opening
, NCCCO RIGGER 2 EXAM ACTUAL 2026
QUESTIONS AND 100% CORRECT ANSWERS
3 multiple choice options
Based on the information below, what is the minimum size chain sling needed? 4
leg-bridleLegs at 60 degreesGrade 80Load Weight = 35,492 lbs
5/8"
When inspecting a custom designed lifting accessory, the following markings
should be readily identifiable on the device.
Working Load Limit, serial number, weight (if over 100 lbs.), manufacturer name
and contact information.
A cylindrical steel tank is 10ft high. The flat tank top and bottom have a diameter
of 6 ft. The tank walls are 3/4 inch thick. Calculate the approximate tank weight.
7,348 lbs
3 multiple choice options
A steel plate is 30 ft. long, 27 inches wide, and 1/4 inch thick. Calculate the weight
of the plate.
675 lbs
3 multiple choice options
