NYC Site Safety Coordinator Exam Questions
With Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. What is the minimum frequency for conducting site safety
inspections by a Site Safety Coordinator (SSC) on a high-rise
construction project?
A. Once a month
B. Once a week
C. Daily
D. Once every six months
B. Once a week
Site Safety Coordinators are required to perform weekly site safety
inspections to identify hazards and ensure compliance with NYC
Construction Codes and OSHA standards.
2. Who is primarily responsible for implementing the safety plan on
a construction site?
A. Project Architect
B. Site Safety Coordinator
C. Construction Superintendent
D. Building Owner
C. Construction Superintendent
While the SSC monitors and enforces compliance, the
superintendent oversees day-to-day implementation of the safety
plan.
3. Which of the following is a primary duty of the Site Safety
Coordinator?
, A. Designing structural components
B. Monitoring safety compliance and reporting hazards
C. Ordering construction materials
D. Hiring subcontractors
B. Monitoring safety compliance and reporting hazards
The SSC’s main responsibility is ensuring that safety regulations
are followed and hazards are reported immediately.
4. According to NYC regulations, a Site Safety Plan must include
which of the following?
A. List of subcontractors only
B. Emergency action plan and safety procedures
C. Construction schedule only
D. Project budget
B. Emergency action plan and safety procedures
A complete Site Safety Plan outlines how emergencies will be
handled and the procedures to prevent accidents.
5. How often must Site Safety Coordinators submit written
inspection reports to the Department of Buildings?
A. Every 30 days
B. Every 14 days
C. Immediately after every inspection
D. Monthly
C. Immediately after every inspection
NYC regulations require SSCs to document and submit safety
findings promptly to ensure immediate corrective action.
6. When should a Site Safety Coordinator halt work on a
construction site?
, A. When work is behind schedule
B. When an unsafe condition exists that could cause serious injury
C. When a worker requests a break
D. When subcontractors complain
B. When an unsafe condition exists that could cause serious
injury
The SSC has the authority to stop work if conditions pose
immediate danger to workers.
7. Which of the following is considered a “fall hazard” under NYC
Construction Codes?
A. Open-sided floors more than 6 feet above lower levels
B. Uneven ground on the site
C. Excessive noise
D. High dust levels
A. Open-sided floors more than 6 feet above lower levels
Open edges above 6 feet are classified as fall hazards requiring
proper guardrails or personal fall protection.
8. What is the minimum height at which personal fall arrest systems
are required on NYC construction sites?
A. 4 feet
B. 6 feet
C. 10 feet
D. 15 feet
B. 6 feet
NYC regulations align with OSHA standards, requiring fall
protection for elevations of 6 feet or higher in the construction
industry.
, 9. Who must receive Site Safety Orientation before entering a
construction site under SSC supervision?
A. Only supervisors
B. All site personnel
C. Only subcontractors
D. Visitors only
B. All site personnel
Every worker and visitor must receive safety orientation to ensure
they understand hazards and emergency procedures.
10. What is the maximum allowable slope for scaffolds used in
construction according to NYC regulations?
A. 1:1
B. 1:2
C. 1:4
D. 1:6
C. 1:4
Scaffolds must maintain stability and slope requirements to
prevent tipping and collapse.
11. Which of the following is the most effective method to
prevent trench collapses?
A. Shoring or sloping the trench walls
B. Using ladders for access
C. Limiting worker presence
D. Adding water to soil
A. Shoring or sloping the trench walls
Proper shoring or sloping is essential to protect workers from
trench cave-ins.
With Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. What is the minimum frequency for conducting site safety
inspections by a Site Safety Coordinator (SSC) on a high-rise
construction project?
A. Once a month
B. Once a week
C. Daily
D. Once every six months
B. Once a week
Site Safety Coordinators are required to perform weekly site safety
inspections to identify hazards and ensure compliance with NYC
Construction Codes and OSHA standards.
2. Who is primarily responsible for implementing the safety plan on
a construction site?
A. Project Architect
B. Site Safety Coordinator
C. Construction Superintendent
D. Building Owner
C. Construction Superintendent
While the SSC monitors and enforces compliance, the
superintendent oversees day-to-day implementation of the safety
plan.
3. Which of the following is a primary duty of the Site Safety
Coordinator?
, A. Designing structural components
B. Monitoring safety compliance and reporting hazards
C. Ordering construction materials
D. Hiring subcontractors
B. Monitoring safety compliance and reporting hazards
The SSC’s main responsibility is ensuring that safety regulations
are followed and hazards are reported immediately.
4. According to NYC regulations, a Site Safety Plan must include
which of the following?
A. List of subcontractors only
B. Emergency action plan and safety procedures
C. Construction schedule only
D. Project budget
B. Emergency action plan and safety procedures
A complete Site Safety Plan outlines how emergencies will be
handled and the procedures to prevent accidents.
5. How often must Site Safety Coordinators submit written
inspection reports to the Department of Buildings?
A. Every 30 days
B. Every 14 days
C. Immediately after every inspection
D. Monthly
C. Immediately after every inspection
NYC regulations require SSCs to document and submit safety
findings promptly to ensure immediate corrective action.
6. When should a Site Safety Coordinator halt work on a
construction site?
, A. When work is behind schedule
B. When an unsafe condition exists that could cause serious injury
C. When a worker requests a break
D. When subcontractors complain
B. When an unsafe condition exists that could cause serious
injury
The SSC has the authority to stop work if conditions pose
immediate danger to workers.
7. Which of the following is considered a “fall hazard” under NYC
Construction Codes?
A. Open-sided floors more than 6 feet above lower levels
B. Uneven ground on the site
C. Excessive noise
D. High dust levels
A. Open-sided floors more than 6 feet above lower levels
Open edges above 6 feet are classified as fall hazards requiring
proper guardrails or personal fall protection.
8. What is the minimum height at which personal fall arrest systems
are required on NYC construction sites?
A. 4 feet
B. 6 feet
C. 10 feet
D. 15 feet
B. 6 feet
NYC regulations align with OSHA standards, requiring fall
protection for elevations of 6 feet or higher in the construction
industry.
, 9. Who must receive Site Safety Orientation before entering a
construction site under SSC supervision?
A. Only supervisors
B. All site personnel
C. Only subcontractors
D. Visitors only
B. All site personnel
Every worker and visitor must receive safety orientation to ensure
they understand hazards and emergency procedures.
10. What is the maximum allowable slope for scaffolds used in
construction according to NYC regulations?
A. 1:1
B. 1:2
C. 1:4
D. 1:6
C. 1:4
Scaffolds must maintain stability and slope requirements to
prevent tipping and collapse.
11. Which of the following is the most effective method to
prevent trench collapses?
A. Shoring or sloping the trench walls
B. Using ladders for access
C. Limiting worker presence
D. Adding water to soil
A. Shoring or sloping the trench walls
Proper shoring or sloping is essential to protect workers from
trench cave-ins.
