Pumper EOC Exam Questions and Verified Answers/Accurate Solutions| Already Graded A+
Identify two correct statements about conducting a daily inspection of a fire apparatus.
Confirm that the foam tank level is full
Operate the pump drive control
The rescue tool supply system equivalent of a junction box is called: A manifold
Vacuum test Check for leaks in the priming device and pump
Pump capacity test Checks the overall condition of the engine
Pressure control test Verifies discharge pressure under varying conditions
Gauge and Flowmeter Compares meter readings with actual pitot tube readings
Tank-to-pump rate Measures whether the piping between an apparatus's water tank and
fire pump meet minimum flow standards
Identify three conditions where you should drive your fire apparatus in low gear
Approaching an intersection
Climbing a hill
Traveling around a corner
Two true statements about inverters Inverters are quiet as compared to generators
Inverters output is usually limited to less than 1500 watts
The purchase acceptance test on a new fire apparatus should focus on: bid specifications
Identify two correct statements about conducting a daily inspection of a fire apparatus.
Confirm that the foam tank level is full
Operate the pump drive control
The rescue tool supply system equivalent of a junction box is called: A manifold
Vacuum test Check for leaks in the priming device and pump
Pump capacity test Checks the overall condition of the engine
Pressure control test Verifies discharge pressure under varying conditions
Gauge and Flowmeter Compares meter readings with actual pitot tube readings
Tank-to-pump rate Measures whether the piping between an apparatus's water tank and
fire pump meet minimum flow standards
Identify three conditions where you should drive your fire apparatus in low gear
Approaching an intersection
Climbing a hill
Traveling around a corner
Two true statements about inverters Inverters are quiet as compared to generators
Inverters output is usually limited to less than 1500 watts
The purchase acceptance test on a new fire apparatus should focus on: bid specifications
