NYC Site Safety Coordinator Exam Questions
With Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. What is the primary role of a Site Safety Coordinator on a
construction site?
a) Supervising construction workers
b) Designing the building layout
c) Implementing and overseeing site safety programs
d) Managing project finances
c) Implementing and overseeing site safety programs
The Site Safety Coordinator is responsible for enforcing safety policies
and ensuring compliance with OSHA and NYC safety regulations.
2. According to NYC regulations, which document must a Site Safety
Coordinator maintain on-site at all times?
a) Project budget report
b) Site Safety Plan
c) Architectural blueprints
d) Equipment purchase orders
b) Site Safety Plan
The Site Safety Plan outlines safety procedures, hazards, and control
measures and must be available to inspectors and workers.
3. How often must a Site Safety Coordinator inspect the construction
site for hazards?
a) Once a month
b) Once a week
, c) Daily
d) Only at project start
c) Daily
Daily inspections ensure that hazards are identified and mitigated
promptly to prevent accidents.
4. When must a Site Safety Coordinator report an accident involving
a serious injury?
a) Within 24 hours
b) Within one week
c) Immediately
d) No report is required
c) Immediately
Immediate reporting allows emergency response and ensures
compliance with OSHA and NYC reporting requirements.
5. Which of the following is considered a “fall hazard”?
a) Wet paint
b) Unguarded edges over 6 feet high
c) Loud machinery
d) Confined spaces
b) Unguarded edges over 6 feet high
Falls from heights are one of the leading causes of construction injuries,
and unguarded edges pose significant risk.
6. What minimum clearance is required when working near
energized electrical equipment?
a) 1 foot
b) 3 feet
, c) 10 feet
d) 20 feet
c) 10 feet
OSHA and NYC safety standards mandate maintaining minimum
distances from live electrical sources to prevent electrocution.
7. Which type of PPE is mandatory when there is a risk of falling
objects?
a) Gloves
b) Safety glasses
c) Hard hats
d) Earplugs
c) Hard hats
Hard hats protect the head from injuries caused by falling tools, debris,
or materials.
8. Confined spaces require a specific permit to enter because:
a) They are dirty
b) They have limited entry and exit and potential hazardous
atmosphere
c) They are far from the site office
d) They are expensive to enter
b) They have limited entry and exit and potential hazardous
atmosphere
Confined spaces can have toxic gases, low oxygen, or other hazards, so
permits and monitoring are required.
9. How should a Site Safety Coordinator handle a subcontractor not
following safety protocols?
, a) Ignore it
b) Document and immediately address the violation
c) Report at project end
d) Ask workers to warn the subcontractor
b) Document and immediately address the violation
Immediate corrective action prevents accidents and ensures
accountability for safety compliance.
10. What is the maximum allowable slope for a temporary
construction ramp for workers?
a) 1:4
b) 1:2
c) 1:6
d) 1:8
c) 1:6
OSHA and NYC codes specify slopes for ramps to reduce slip and fall
hazards while transporting materials.
11. Which fire extinguisher type is appropriate for electrical
fires?
a) Water
b) Foam
c) CO2 or dry chemical
d) Wet chemical
c) CO2 or dry chemical
Water can conduct electricity, making CO2 or dry chemical extinguishers
safe for electrical fires.
With Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. What is the primary role of a Site Safety Coordinator on a
construction site?
a) Supervising construction workers
b) Designing the building layout
c) Implementing and overseeing site safety programs
d) Managing project finances
c) Implementing and overseeing site safety programs
The Site Safety Coordinator is responsible for enforcing safety policies
and ensuring compliance with OSHA and NYC safety regulations.
2. According to NYC regulations, which document must a Site Safety
Coordinator maintain on-site at all times?
a) Project budget report
b) Site Safety Plan
c) Architectural blueprints
d) Equipment purchase orders
b) Site Safety Plan
The Site Safety Plan outlines safety procedures, hazards, and control
measures and must be available to inspectors and workers.
3. How often must a Site Safety Coordinator inspect the construction
site for hazards?
a) Once a month
b) Once a week
, c) Daily
d) Only at project start
c) Daily
Daily inspections ensure that hazards are identified and mitigated
promptly to prevent accidents.
4. When must a Site Safety Coordinator report an accident involving
a serious injury?
a) Within 24 hours
b) Within one week
c) Immediately
d) No report is required
c) Immediately
Immediate reporting allows emergency response and ensures
compliance with OSHA and NYC reporting requirements.
5. Which of the following is considered a “fall hazard”?
a) Wet paint
b) Unguarded edges over 6 feet high
c) Loud machinery
d) Confined spaces
b) Unguarded edges over 6 feet high
Falls from heights are one of the leading causes of construction injuries,
and unguarded edges pose significant risk.
6. What minimum clearance is required when working near
energized electrical equipment?
a) 1 foot
b) 3 feet
, c) 10 feet
d) 20 feet
c) 10 feet
OSHA and NYC safety standards mandate maintaining minimum
distances from live electrical sources to prevent electrocution.
7. Which type of PPE is mandatory when there is a risk of falling
objects?
a) Gloves
b) Safety glasses
c) Hard hats
d) Earplugs
c) Hard hats
Hard hats protect the head from injuries caused by falling tools, debris,
or materials.
8. Confined spaces require a specific permit to enter because:
a) They are dirty
b) They have limited entry and exit and potential hazardous
atmosphere
c) They are far from the site office
d) They are expensive to enter
b) They have limited entry and exit and potential hazardous
atmosphere
Confined spaces can have toxic gases, low oxygen, or other hazards, so
permits and monitoring are required.
9. How should a Site Safety Coordinator handle a subcontractor not
following safety protocols?
, a) Ignore it
b) Document and immediately address the violation
c) Report at project end
d) Ask workers to warn the subcontractor
b) Document and immediately address the violation
Immediate corrective action prevents accidents and ensures
accountability for safety compliance.
10. What is the maximum allowable slope for a temporary
construction ramp for workers?
a) 1:4
b) 1:2
c) 1:6
d) 1:8
c) 1:6
OSHA and NYC codes specify slopes for ramps to reduce slip and fall
hazards while transporting materials.
11. Which fire extinguisher type is appropriate for electrical
fires?
a) Water
b) Foam
c) CO2 or dry chemical
d) Wet chemical
c) CO2 or dry chemical
Water can conduct electricity, making CO2 or dry chemical extinguishers
safe for electrical fires.
