EPA Lead-Safe Renovator, Repair &
Painting Certification Practice Exam
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the primary purpose of the EPA Lead Renovation, Repair, and
Painting (RRP) Rule?
A. To promote general construction safety
B. To prevent exposure to lead-based paint
C. To regulate asbestos removal
D. To ensure building permits are obtained
Answer: B. To prevent exposure to lead-based paint
Rationale: The RRP Rule was designed to protect children and workers from
lead-based paint hazards during renovation, repair, and painting activities in
pre-1978 housing and child-occupied facilities.
,2. Which of the following buildings is regulated under the EPA RRP Rule?
A. Buildings constructed in 1980
B. Child-occupied facilities built before 1978
C. New construction homes
D. Industrial warehouses
Answer: B. Child-occupied facilities built before 1978
Rationale: The RRP Rule applies to pre-1978 housing and child-occupied
facilities because these are most likely to contain lead-based paint.
3. Before beginning a renovation in a pre-1978 home, what must a
certified renovator do?
A. Obtain a building permit
B. Provide the EPA’s lead pamphlet to occupants
C. Perform lead paint testing with XRF only
D. Hire a licensed architect
Answer: B. Provide the EPA’s lead pamphlet to occupants
Rationale: EPA requires renovators to distribute the “Renovate Right”
pamphlet to occupants before starting work to inform them about lead
hazards.
,4. What is the maximum containment area for using dry scraping on a
small window in a pre-1978 home without additional lead safety
measures?
A. 2 square feet per room
B. 10 square feet per room
C. 100 square feet per room
D. No limit
Answer: B. 10 square feet per room
Rationale: EPA RRP allows limited dry scraping on small areas (<10 sq ft per
room) but larger areas require containment and lead-safe practices.
5. Which personal protective equipment (PPE) is required during lead-safe
renovation work?
A. Hard hat only
B. Gloves, disposable coveralls, and N95 respirator
C. Safety glasses only
D. Steel-toed boots only
Answer: B. Gloves, disposable coveralls, and N95 respirator
Rationale: Proper PPE reduces the risk of exposure to lead dust and debris
during renovation activities.
, 6. What is the primary method for cleaning up lead dust after renovation?
A. Dry sweeping
B. Wet wiping and HEPA vacuuming
C. Using a regular household vacuum
D. Air blowing
Answer: B. Wet wiping and HEPA vacuuming
Rationale: EPA RRP specifies using wet methods and HEPA-filtered vacuums
to safely remove lead dust.
7. Which of the following is NOT an EPA-approved lead hazard reduction
practice?
A. Containing the work area
B. Using wet methods to control dust
C. Using dry sanding without a HEPA vacuum
D. Proper disposal of waste
Answer: C. Using dry sanding without a HEPA vacuum
Rationale: Dry sanding without proper containment or HEPA vacuuming can
create significant lead dust hazards and is prohibited.
8. What should be done if a child under six is present in the work area?
A. Continue work without change
B. Move the child to another room and seal the area
Painting Certification Practice Exam
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the primary purpose of the EPA Lead Renovation, Repair, and
Painting (RRP) Rule?
A. To promote general construction safety
B. To prevent exposure to lead-based paint
C. To regulate asbestos removal
D. To ensure building permits are obtained
Answer: B. To prevent exposure to lead-based paint
Rationale: The RRP Rule was designed to protect children and workers from
lead-based paint hazards during renovation, repair, and painting activities in
pre-1978 housing and child-occupied facilities.
,2. Which of the following buildings is regulated under the EPA RRP Rule?
A. Buildings constructed in 1980
B. Child-occupied facilities built before 1978
C. New construction homes
D. Industrial warehouses
Answer: B. Child-occupied facilities built before 1978
Rationale: The RRP Rule applies to pre-1978 housing and child-occupied
facilities because these are most likely to contain lead-based paint.
3. Before beginning a renovation in a pre-1978 home, what must a
certified renovator do?
A. Obtain a building permit
B. Provide the EPA’s lead pamphlet to occupants
C. Perform lead paint testing with XRF only
D. Hire a licensed architect
Answer: B. Provide the EPA’s lead pamphlet to occupants
Rationale: EPA requires renovators to distribute the “Renovate Right”
pamphlet to occupants before starting work to inform them about lead
hazards.
,4. What is the maximum containment area for using dry scraping on a
small window in a pre-1978 home without additional lead safety
measures?
A. 2 square feet per room
B. 10 square feet per room
C. 100 square feet per room
D. No limit
Answer: B. 10 square feet per room
Rationale: EPA RRP allows limited dry scraping on small areas (<10 sq ft per
room) but larger areas require containment and lead-safe practices.
5. Which personal protective equipment (PPE) is required during lead-safe
renovation work?
A. Hard hat only
B. Gloves, disposable coveralls, and N95 respirator
C. Safety glasses only
D. Steel-toed boots only
Answer: B. Gloves, disposable coveralls, and N95 respirator
Rationale: Proper PPE reduces the risk of exposure to lead dust and debris
during renovation activities.
, 6. What is the primary method for cleaning up lead dust after renovation?
A. Dry sweeping
B. Wet wiping and HEPA vacuuming
C. Using a regular household vacuum
D. Air blowing
Answer: B. Wet wiping and HEPA vacuuming
Rationale: EPA RRP specifies using wet methods and HEPA-filtered vacuums
to safely remove lead dust.
7. Which of the following is NOT an EPA-approved lead hazard reduction
practice?
A. Containing the work area
B. Using wet methods to control dust
C. Using dry sanding without a HEPA vacuum
D. Proper disposal of waste
Answer: C. Using dry sanding without a HEPA vacuum
Rationale: Dry sanding without proper containment or HEPA vacuuming can
create significant lead dust hazards and is prohibited.
8. What should be done if a child under six is present in the work area?
A. Continue work without change
B. Move the child to another room and seal the area
