NYC DOB Site Safety Manager Exam Questions
With Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. Which of the following is the primary responsibility of a Site Safety
Manager (SSM) under NYC DOB regulations?
A. Supervising all construction workers
B. Ensuring safety compliance and OSHA standards are followed
on site
C. Approving building permits
D. Scheduling construction deliveries
B. Ensuring safety compliance and OSHA standards are followed on
site
Rationale: The SSM’s primary duty is to oversee safety compliance on
construction sites, including adherence to OSHA and DOB regulations.
While supervising workers is part of site oversight, the focus is safety
management, not general supervision or permitting.
2. What is required to be posted in a conspicuous location at all
construction sites under SSM oversight?
A. Emergency contact list and OSHA poster
B. Daily work schedules
C. Payroll records
D. Building plans
A. Emergency contact list and OSHA poster
Rationale: NYC DOB regulations require emergency contacts and OSHA
,posters to be posted where all workers can see them to ensure
awareness of safety protocols and worker rights.
3. According to NYC DOB rules, who must be notified immediately in
the event of a serious injury on site?
A. The contractor only
B. The local precinct
C. NYC Department of Buildings and OSHA
D. The architect
C. NYC Department of Buildings and OSHA
Rationale: The SSM must report serious injuries to the DOB and OSHA
promptly to comply with legal reporting requirements and ensure
proper investigations.
4. How often must a Site Safety Manager conduct inspections of
active construction sites?
A. Weekly
B. Daily
C. Monthly
D. Annually
B. Daily
Rationale: Daily inspections are required to monitor ongoing site
conditions and address hazards immediately, ensuring continuous
compliance with safety regulations.
5. Which of the following best defines a “controlled access zone”?
A. An area where only visitors may enter
B. An area with limited access due to specific hazards
C. Any part of the building under construction
D. The public sidewalk in front of the site
,B. An area with limited access due to specific hazards
Rationale: Controlled access zones are designated areas where specific
safety hazards exist, such as overhead work or demolition, requiring
restricted access to authorized personnel only.
6. What is the minimum requirement for fall protection on
construction sites over 6 feet?
A. Hard hats only
B. Guardrails, safety nets, or personal fall arrest systems
C. Safety boots
D. Warning signs
B. Guardrails, safety nets, or personal fall arrest systems
Rationale: OSHA and DOB standards require active fall protection for
heights exceeding 6 feet to prevent serious injury or fatal falls.
7. When must a Site Safety Manager review the Site Safety Plan
(SSP)?
A. Only before construction begins
B. Before work begins and whenever site conditions change
C. Once a year
D. Only if an accident occurs
B. Before work begins and whenever site conditions change
Rationale: The SSP must be actively maintained and updated to reflect
site conditions, hazards, and changes to ensure continuous safety
compliance.
8. Which of the following is NOT considered a hazardous area
requiring Site Safety Manager oversight?
A. Excavations
B. Demolition zones
, C. Office trailer
D. Roofing work areas
C. Office trailer
Rationale: While office areas require general safety, they are not
considered hazardous construction zones requiring active SSM
management compared to excavation, demolition, and roofing areas.
9. What is the maximum permissible load on a scaffold as per NYC
DOB regulations?
A. There is no maximum load
B. Load must not exceed the rated capacity specified by the
manufacturer
C. 1000 lbs per section
D. 500 lbs per worker
B. Load must not exceed the rated capacity specified by the
manufacturer
Rationale: Scaffolds must be used in accordance with manufacturer
specifications to prevent collapse or accidents, and the SSM must ensure
adherence.
10. Which type of PPE is mandatory for workers exposed to
falling objects?
A. Gloves
B. Safety glasses
C. Hard hats
D. Earplugs
C. Hard hats
Rationale: Hard hats are required for protection from head injuries
caused by falling objects, as outlined in OSHA and DOB standards.
With Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant Download Pdf
1. Which of the following is the primary responsibility of a Site Safety
Manager (SSM) under NYC DOB regulations?
A. Supervising all construction workers
B. Ensuring safety compliance and OSHA standards are followed
on site
C. Approving building permits
D. Scheduling construction deliveries
B. Ensuring safety compliance and OSHA standards are followed on
site
Rationale: The SSM’s primary duty is to oversee safety compliance on
construction sites, including adherence to OSHA and DOB regulations.
While supervising workers is part of site oversight, the focus is safety
management, not general supervision or permitting.
2. What is required to be posted in a conspicuous location at all
construction sites under SSM oversight?
A. Emergency contact list and OSHA poster
B. Daily work schedules
C. Payroll records
D. Building plans
A. Emergency contact list and OSHA poster
Rationale: NYC DOB regulations require emergency contacts and OSHA
,posters to be posted where all workers can see them to ensure
awareness of safety protocols and worker rights.
3. According to NYC DOB rules, who must be notified immediately in
the event of a serious injury on site?
A. The contractor only
B. The local precinct
C. NYC Department of Buildings and OSHA
D. The architect
C. NYC Department of Buildings and OSHA
Rationale: The SSM must report serious injuries to the DOB and OSHA
promptly to comply with legal reporting requirements and ensure
proper investigations.
4. How often must a Site Safety Manager conduct inspections of
active construction sites?
A. Weekly
B. Daily
C. Monthly
D. Annually
B. Daily
Rationale: Daily inspections are required to monitor ongoing site
conditions and address hazards immediately, ensuring continuous
compliance with safety regulations.
5. Which of the following best defines a “controlled access zone”?
A. An area where only visitors may enter
B. An area with limited access due to specific hazards
C. Any part of the building under construction
D. The public sidewalk in front of the site
,B. An area with limited access due to specific hazards
Rationale: Controlled access zones are designated areas where specific
safety hazards exist, such as overhead work or demolition, requiring
restricted access to authorized personnel only.
6. What is the minimum requirement for fall protection on
construction sites over 6 feet?
A. Hard hats only
B. Guardrails, safety nets, or personal fall arrest systems
C. Safety boots
D. Warning signs
B. Guardrails, safety nets, or personal fall arrest systems
Rationale: OSHA and DOB standards require active fall protection for
heights exceeding 6 feet to prevent serious injury or fatal falls.
7. When must a Site Safety Manager review the Site Safety Plan
(SSP)?
A. Only before construction begins
B. Before work begins and whenever site conditions change
C. Once a year
D. Only if an accident occurs
B. Before work begins and whenever site conditions change
Rationale: The SSP must be actively maintained and updated to reflect
site conditions, hazards, and changes to ensure continuous safety
compliance.
8. Which of the following is NOT considered a hazardous area
requiring Site Safety Manager oversight?
A. Excavations
B. Demolition zones
, C. Office trailer
D. Roofing work areas
C. Office trailer
Rationale: While office areas require general safety, they are not
considered hazardous construction zones requiring active SSM
management compared to excavation, demolition, and roofing areas.
9. What is the maximum permissible load on a scaffold as per NYC
DOB regulations?
A. There is no maximum load
B. Load must not exceed the rated capacity specified by the
manufacturer
C. 1000 lbs per section
D. 500 lbs per worker
B. Load must not exceed the rated capacity specified by the
manufacturer
Rationale: Scaffolds must be used in accordance with manufacturer
specifications to prevent collapse or accidents, and the SSM must ensure
adherence.
10. Which type of PPE is mandatory for workers exposed to
falling objects?
A. Gloves
B. Safety glasses
C. Hard hats
D. Earplugs
C. Hard hats
Rationale: Hard hats are required for protection from head injuries
caused by falling objects, as outlined in OSHA and DOB standards.
