ICC REINFORCED CONCRETE final code test- 60 questions Answered Questions Detailed Answers (100% Correct) with Rationales Rated A+!!!
An acceptable reinforcing steel support mechanism for a Precast dobie blocks
24-inch deep footing are?
-precast dobie blocks
-large,solid pieces of glass
-masonry CMU pieces
-wooden blocks
all of the following are true except ? Concrete cover for members in highly corrosive environments will typically remain
---Minimum concrete cover for bundled bars of any size the same as cast agonist earth
need not be greater than 2 inches, unless they are in a
member that's permanently cast against earth
---specified concrete cover for headed shear stud
reinforcement shall not be less then the cover requirement
for the member in which the stud reinforcement is located
---Concrete cover for the flexural members, walls, and
compression members with an effective depth of 8-inches
can vary -3/8 of an inch
---Concrete cover for members in highly corrosive
environments will typically remain the same as cast
against earth
As a general rule, Lap splicing bar larger then NO.11 Is? not permitted
-not permitted
-permitted
-permitted if bars will be in tension within the structural
member
-permitted only if bars are within a bundle
2/4/2026, 7:19:05 PM
, ICC REINFORCED CONCRETE final code test- 60 questions Answered Questions Detailed Answers (100% Correct) with Rationales Rated A+!!!
before new concrete is placed, construction joints must be? wetted, and standing water removed
-blown free of dirt and debris
-wetted ,and standing water removed
-sand blasted
- treated with a bonding agent
grade 60 reinforcing steel has an ultimate strength of? 90,000 psi
-60,000
-75,000
-90,000
-100,000
The__________may waive requirements for the building official
employment of a special inspection agency if he/she finds
that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above
what is the maximum allowable center to center spacing of 6 inches
spliced bars in a non-contact lap splice for the flexural
members?
-6 inches
-4 inches
-8 inches
-2 inches
2/4/2026, 7:19:05 PM
An acceptable reinforcing steel support mechanism for a Precast dobie blocks
24-inch deep footing are?
-precast dobie blocks
-large,solid pieces of glass
-masonry CMU pieces
-wooden blocks
all of the following are true except ? Concrete cover for members in highly corrosive environments will typically remain
---Minimum concrete cover for bundled bars of any size the same as cast agonist earth
need not be greater than 2 inches, unless they are in a
member that's permanently cast against earth
---specified concrete cover for headed shear stud
reinforcement shall not be less then the cover requirement
for the member in which the stud reinforcement is located
---Concrete cover for the flexural members, walls, and
compression members with an effective depth of 8-inches
can vary -3/8 of an inch
---Concrete cover for members in highly corrosive
environments will typically remain the same as cast
against earth
As a general rule, Lap splicing bar larger then NO.11 Is? not permitted
-not permitted
-permitted
-permitted if bars will be in tension within the structural
member
-permitted only if bars are within a bundle
2/4/2026, 7:19:05 PM
, ICC REINFORCED CONCRETE final code test- 60 questions Answered Questions Detailed Answers (100% Correct) with Rationales Rated A+!!!
before new concrete is placed, construction joints must be? wetted, and standing water removed
-blown free of dirt and debris
-wetted ,and standing water removed
-sand blasted
- treated with a bonding agent
grade 60 reinforcing steel has an ultimate strength of? 90,000 psi
-60,000
-75,000
-90,000
-100,000
The__________may waive requirements for the building official
employment of a special inspection agency if he/she finds
that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above
what is the maximum allowable center to center spacing of 6 inches
spliced bars in a non-contact lap splice for the flexural
members?
-6 inches
-4 inches
-8 inches
-2 inches
2/4/2026, 7:19:05 PM
