1|Page
California Fluoroscopy Supervisor and Operator Exam
Most Recent 2026 Actual Complete Real Verified Exam
Questions And Correct Answers (Verified Answers)
Already Graded A+||Newest Exam!!!
The major reason that image intensified fluoroscopy is
employed is that it allows for:
a. Dynamic viewing
b. Rapid development
c. High visual acuity
d. Low patient exposure - Answer-a. Dynamic viewing
Portable intensified fluoroscopy used for diagnostic
purposes must not exceed ____ at the tabletop:
a. 1 R/min
b. 3 R/min
c. 5 R/min
d. 10 R/min - Answer-c. 5 R/min
,2|Page
Which type of vision is most commonly employed during
conventional fluoroscopic exam?
a. Photopic
b. Scotopic
c. Mesopic
d. Lovotopic - Answer-a. Photopic
As the illumination of the light source increases, visual
acuity:
a. Increases
b. Decreases
c. Remains the same - Answer-a. Increases
note:
at low light = visual acuity is lowest
at bright light = visual acuity is max
The time over which the human eye can store a visual
image is termed _____ time:
,3|Page
a. Adaptation
b. Acuity
c. Integration
d. Illumination - Answer-c. Integration
Which of the following structures if first to intercept light
incident on the eye
a. Rods
b. Iris
c. Cornea
d. Cones - Answer-c. Cornea
The normal view distance for binocular vision is
a. 1-2 in
b. 4-8 in
c. 12-15 in
d. 16-20 in - Answer-c. 12-15 in
, 4|Page
In general, during conventional fluoroscopic examinations
the preferred technique is:
a. High kVp, low mA
b. High kVp, low mAs
c. Low kVp, high mAs
d. Low kVp, high mA - Answer-a. High kVp, low mA
Which of the following properties are associated with
cones rather than rods:
a. Contrast perception
b. Color detection
c. Visual acuity
d. All of the above - Answer-d. All of the above
How long does it take for the fluoroscopic table to move
from the horizontal to the vertical position?
a. 5-15 sec
California Fluoroscopy Supervisor and Operator Exam
Most Recent 2026 Actual Complete Real Verified Exam
Questions And Correct Answers (Verified Answers)
Already Graded A+||Newest Exam!!!
The major reason that image intensified fluoroscopy is
employed is that it allows for:
a. Dynamic viewing
b. Rapid development
c. High visual acuity
d. Low patient exposure - Answer-a. Dynamic viewing
Portable intensified fluoroscopy used for diagnostic
purposes must not exceed ____ at the tabletop:
a. 1 R/min
b. 3 R/min
c. 5 R/min
d. 10 R/min - Answer-c. 5 R/min
,2|Page
Which type of vision is most commonly employed during
conventional fluoroscopic exam?
a. Photopic
b. Scotopic
c. Mesopic
d. Lovotopic - Answer-a. Photopic
As the illumination of the light source increases, visual
acuity:
a. Increases
b. Decreases
c. Remains the same - Answer-a. Increases
note:
at low light = visual acuity is lowest
at bright light = visual acuity is max
The time over which the human eye can store a visual
image is termed _____ time:
,3|Page
a. Adaptation
b. Acuity
c. Integration
d. Illumination - Answer-c. Integration
Which of the following structures if first to intercept light
incident on the eye
a. Rods
b. Iris
c. Cornea
d. Cones - Answer-c. Cornea
The normal view distance for binocular vision is
a. 1-2 in
b. 4-8 in
c. 12-15 in
d. 16-20 in - Answer-c. 12-15 in
, 4|Page
In general, during conventional fluoroscopic examinations
the preferred technique is:
a. High kVp, low mA
b. High kVp, low mAs
c. Low kVp, high mAs
d. Low kVp, high mA - Answer-a. High kVp, low mA
Which of the following properties are associated with
cones rather than rods:
a. Contrast perception
b. Color detection
c. Visual acuity
d. All of the above - Answer-d. All of the above
How long does it take for the fluoroscopic table to move
from the horizontal to the vertical position?
a. 5-15 sec
