1
ASSOCIATE CET EXAM 2025-26 LATEST
STUDY QUIDE QUESTIONS CORRECTLY
ANSWERED
Applying positive voltage to the P end of an ordinary germanium diode:
A. Will forward bias it
B. Will reverse bias it
C. Probably will damage it
D. Should have no effect on it Correct Answer -A. Will forward bias it
B+, or supply voltages in electronics products, is considered to be:
A. +5 to +12 VDC
B. 0 to 30 V DC
C. +12 to 300 V DC
D. The anode or plate voltage supply Correct Answer -D. The anode or plate
voltage supply
Before beginning to troubleshoot, what should you do?
A. Verify the failure
B. Call your friend
,2
C. Disassemble the equipment
D. Divide and Conquer Correct Answer -A. Verify the failure
Before returning the equipment to the customer it is important that you
.
,3
A. Verify operation
B. Prepare the bill
C. Hide extra screws
D. Call the customer Correct Answer -A. Verify operation
Cables of different impedances may be combined for runs.
A. True
B. False Correct Answer -B. False
Calculating the total capacitance of several capacitors connected in parallel
.
A. Is not necessary as they are not used this way
B. Causes a need to consider inductance factors
C. Is done by adding each of the capacitance values
D. Is the same as the power factor Correct Answer -C. Is done by adding each of
the capacitance values
Capacitors of 100pf, 100pf and 50pf connected in a series total for the circuit?
A. 25 uf
B. 250 uf
C. 25 pf
D. 250 pf Correct Answer -C. 25 pf
, 4
Carbon microphones are much like variable:
A. Capacitors
B. Resistors
C. Thermistors
D. Inductors Correct Answer -B. Resistors
Changing the filter capacitor from 10μF to 50μF would result in:
A. A lower ripple voltage
B. A lower ripple frequency
C. Both A and B Correct Answer -A. A lower ripple voltage
Choose three of the following amplifier configuration is that yield the highest
power gains.
A. Common-grid
B. Common-cathode
C. Common-plate
D. Common-source
E. Common-gate
F. Common-drain
G. Common-emitter
H. Common-base
I. Common-collector Correct Answer -B. Common-cathode
ASSOCIATE CET EXAM 2025-26 LATEST
STUDY QUIDE QUESTIONS CORRECTLY
ANSWERED
Applying positive voltage to the P end of an ordinary germanium diode:
A. Will forward bias it
B. Will reverse bias it
C. Probably will damage it
D. Should have no effect on it Correct Answer -A. Will forward bias it
B+, or supply voltages in electronics products, is considered to be:
A. +5 to +12 VDC
B. 0 to 30 V DC
C. +12 to 300 V DC
D. The anode or plate voltage supply Correct Answer -D. The anode or plate
voltage supply
Before beginning to troubleshoot, what should you do?
A. Verify the failure
B. Call your friend
,2
C. Disassemble the equipment
D. Divide and Conquer Correct Answer -A. Verify the failure
Before returning the equipment to the customer it is important that you
.
,3
A. Verify operation
B. Prepare the bill
C. Hide extra screws
D. Call the customer Correct Answer -A. Verify operation
Cables of different impedances may be combined for runs.
A. True
B. False Correct Answer -B. False
Calculating the total capacitance of several capacitors connected in parallel
.
A. Is not necessary as they are not used this way
B. Causes a need to consider inductance factors
C. Is done by adding each of the capacitance values
D. Is the same as the power factor Correct Answer -C. Is done by adding each of
the capacitance values
Capacitors of 100pf, 100pf and 50pf connected in a series total for the circuit?
A. 25 uf
B. 250 uf
C. 25 pf
D. 250 pf Correct Answer -C. 25 pf
, 4
Carbon microphones are much like variable:
A. Capacitors
B. Resistors
C. Thermistors
D. Inductors Correct Answer -B. Resistors
Changing the filter capacitor from 10μF to 50μF would result in:
A. A lower ripple voltage
B. A lower ripple frequency
C. Both A and B Correct Answer -A. A lower ripple voltage
Choose three of the following amplifier configuration is that yield the highest
power gains.
A. Common-grid
B. Common-cathode
C. Common-plate
D. Common-source
E. Common-gate
F. Common-drain
G. Common-emitter
H. Common-base
I. Common-collector Correct Answer -B. Common-cathode
